Daily Papers

We review our recent work in the area of autonomous materials research, highlighting the coupling of machine learning methods and models and more problem-aware modeling. We review the general Bayesian framework for closed-loop design employed by many autonomous materials platforms. We then provide examples of our work on such platforms. We finally review our approaches to extend current statistical and ML models to better reflect problem-specific structure including the use of physics-based models and incorporation of operational considerations into the decision-making procedure.

The Materials Genome Initiative catalyzed the proliferation of centralized platforms--SaaS, PaaS, and IaaS--that aggregate computational and experimental resources for accelerated materials discovery. In parallel, breakthroughs in large language models (LLMs) and autonomous agents have created powerful new reasoning capabilities for scientific research. Yet a critical "last mile" problem remains: while we possess world-class models and vast repositories of materials data, we lack the organizational infrastructure to compose these capabilities securely across institutional boundaries. The development of structural and functional materials for harsh service environments--high-temperature alloys, radiation resistant steels, corrosion-resistant coatings--remains characterized by long-term iteration, mechanistic complexity, and high domain expertise--demands that exceed both monolithic agent systems and traditional centralized platforms. To address this gap we propose OpenAaaS, an open-source hierarchical and distributed Agent-as-a-Service framework that enables organized multi-agent collaboration for intelligent materials design. OpenAaaS is built on a single foundational principle: code flows, data stays still. A Master Agent plans and decomposes complex research tasks without requiring direct access to subordinate agents' managed data and computational resources. Sub-agents, deployed as near-data execution nodes, retain full sovereignty over local datasets, proprietary algorithms, and specialized hardware. This architecture guarantees that raw data never leaves its domain of origin while enabling cross-scale, cross-domain secure integration of previously isolated materials intelligence silos. We validate the framework through two representative case studies: (i) AlphaAgent, an evidence-grounded materials literature analysis executor that achieves 4.66/5.0 on deep analytical questions against single-pass RAG baselines; and (ii) an ultra-large-scale hexa-high-entropy alloy descriptor database service that demonstrates secure near-data execution and domain-specific scientific workflows under strict data-sovereignty constraints. OpenAaaS establishes a principled pathway toward "organized research" via agent collectives, offering a scalable foundation for next-generation materials intelligent design platforms. All source code is available at https://github.com/Wolido/OpenAaaS.

Synthesizing unstructured research materials into manuscripts is an essential yet under-explored challenge in AI-driven scientific discovery. Existing autonomous writers are rigidly coupled to specific experimental pipelines, and produce superficial literature reviews. We introduce PaperOrchestra, a multi-agent framework for automated AI research paper writing. It flexibly transforms unconstrained pre-writing materials into submission-ready LaTeX manuscripts, including comprehensive literature synthesis and generated visuals, such as plots and conceptual diagrams. To evaluate performance, we present PaperWritingBench, the first standardized benchmark of reverse-engineered raw materials from 200 top-tier AI conference papers, alongside a comprehensive suite of automated evaluators. In side-by-side human evaluations, PaperOrchestra significantly outperforms autonomous baselines, achieving an absolute win rate margin of 50%-68% in literature review quality, and 14%-38% in overall manuscript quality.

Materials characterization is fundamental to acquiring materials information, revealing the processing-microstructure-property relationships that guide material design and optimization. While multimodal large language models (MLLMs) have recently shown promise in generative and predictive tasks within materials science, their capacity to understand real-world characterization imaging data remains underexplored. To bridge this gap, we present MatCha, the first benchmark for materials characterization image understanding, comprising 1,500 questions that demand expert-level domain expertise. MatCha encompasses four key stages of materials research comprising 21 distinct tasks, each designed to reflect authentic challenges faced by materials scientists. Our evaluation of state-of-the-art MLLMs on MatCha reveals a significant performance gap compared to human experts. These models exhibit degradation when addressing questions requiring higher-level expertise and sophisticated visual perception. Simple few-shot and chain-of-thought prompting struggle to alleviate these limitations. These findings highlight that existing MLLMs still exhibit limited adaptability to real-world materials characterization scenarios. We hope MatCha will facilitate future research in areas such as new material discovery and autonomous scientific agents. MatCha is available at https://github.com/FreedomIntelligence/MatCha.

Large language models and autonomous AI agents have evolved rapidly, resulting in a diverse array of evaluation benchmarks, frameworks, and collaboration protocols. However, the landscape remains fragmented and lacks a unified taxonomy or comprehensive survey. Therefore, we present a side-by-side comparison of benchmarks developed between 2019 and 2025 that evaluate these models and agents across multiple domains. In addition, we propose a taxonomy of approximately 60 benchmarks that cover general and academic knowledge reasoning, mathematical problem-solving, code generation and software engineering, factual grounding and retrieval, domain-specific evaluations, multimodal and embodied tasks, task orchestration, and interactive assessments. Furthermore, we review AI-agent frameworks introduced between 2023 and 2025 that integrate large language models with modular toolkits to enable autonomous decision-making and multi-step reasoning. Moreover, we present real-world applications of autonomous AI agents in materials science, biomedical research, academic ideation, software engineering, synthetic data generation, chemical reasoning, mathematical problem-solving, geographic information systems, multimedia, healthcare, and finance. We then survey key agent-to-agent collaboration protocols, namely the Agent Communication Protocol (ACP), the Model Context Protocol (MCP), and the Agent-to-Agent Protocol (A2A). Finally, we discuss recommendations for future research, focusing on advanced reasoning strategies, failure modes in multi-agent LLM systems, automated scientific discovery, dynamic tool integration via reinforcement learning, integrated search capabilities, and security vulnerabilities in agent protocols.

Artificial intelligence has advanced scientific discovery, but most AI4Science systems remain fragmented tools that rely on humans to coordinate problem formulation, literature grounding, model use, simulation, validation, and knowledge reuse. This paper presents SCION (Scientific Collaborative Innovation with Agentic Organizational Nexus), an agentic scientific operating system that acts as an organizational nexus. Through a Science Agent serving as a Meta-Harness, SCION connects scientific tasks, tools, agents, artifacts, and memory, transforming research into an executable, auditable, and reusable operational process. At its core is the Research Execution Plan (REP), which compiles high-level scientific intent into staged objectives, dependencies, verification checkpoints, tool requirements, expected artifacts, and fallback conditions. SCION further integrates hierarchical multi-agent execution, profile-driven specialization, selective context construction, governed delegation, and layered epistemic memory to support long-horizon scientific work. We formulate discovery under SCION as Target-conditioned Inverse Search and extend it to hidden-target settings through batch active search under finite experimental budgets. Applications in materials analysis, molecule design, and protein or antibody screening, together with experiments on scientific reading, idea generation, molecule generation, and antibody screening, show that SCION outperforms existing autonomous research-agent baselines, especially in decomposition, verification, refinement, and memory reuse. Overall, SCION shifts AI from isolated tools toward a coordinated operational layer for traceable and reusable scientific innovation.

The convergence of artificial intelligence and materials science presents a transformative opportunity, but achieving true acceleration in discovery requires moving beyond task-isolated, fine-tuned models toward agentic systems that plan, act, and learn across the full discovery loop. This survey advances a unique pipeline-centric view that spans from corpus curation and pretraining, through domain adaptation and instruction tuning, to goal-conditioned agents interfacing with simulation and experimental platforms. Unlike prior reviews, we treat the entire process as an end-to-end system to be optimized for tangible discovery outcomes rather than proxy benchmarks. This perspective allows us to trace how upstream design choices-such as data curation and training objectives-can be aligned with downstream experimental success through effective credit assignment. To bridge communities and establish a shared frame of reference, we first present an integrated lens that aligns terminology, evaluation, and workflow stages across AI and materials science. We then analyze the field through two focused lenses: From the AI perspective, the survey details LLM strengths in pattern recognition, predictive analytics, and natural language processing for literature mining, materials characterization, and property prediction; from the materials science perspective, it highlights applications in materials design, process optimization, and the acceleration of computational workflows via integration with external tools (e.g., DFT, robotic labs). Finally, we contrast passive, reactive approaches with agentic design, cataloging current contributions while motivating systems that pursue long-horizon goals with autonomy, memory, and tool use. This survey charts a practical roadmap towards autonomous, safety-aware LLM agents aimed at discovering novel and useful materials.

Artificial intelligence is reshaping scientific exploration, but most methods automate procedural tasks without engaging in scientific reasoning, limiting autonomy in discovery. We introduce Materials Agents for Simulation and Theory in Electronic-structure Reasoning (MASTER), an active learning framework where large language models autonomously design, execute, and interpret atomistic simulations. In MASTER, a multimodal system translates natural language into density functional theory workflows, while higher-level reasoning agents guide discovery through a hierarchy of strategies, including a single agent baseline and three multi-agent approaches: peer review, triage-ranking, and triage-forms. Across two chemical applications, CO adsorption on Cu-surface transition metal (M) adatoms and on M-N-C catalysts, reasoning-driven exploration reduces required atomistic simulations by up to 90% relative to trial-and-error selection. Reasoning trajectories reveal chemically grounded decisions that cannot be explained by stochastic sampling or semantic bias. Altogether, multi-agent collaboration accelerates materials discovery and marks a new paradigm for autonomous scientific exploration.

Artificial intelligence (AI) is reshaping scientific discovery, evolving from specialized computational tools into autonomous research partners. We position Agentic Science as a pivotal stage within the broader AI for Science paradigm, where AI systems progress from partial assistance to full scientific agency. Enabled by large language models (LLMs), multimodal systems, and integrated research platforms, agentic AI shows capabilities in hypothesis generation, experimental design, execution, analysis, and iterative refinement -- behaviors once regarded as uniquely human. This survey provides a domain-oriented review of autonomous scientific discovery across life sciences, chemistry, materials science, and physics. We unify three previously fragmented perspectives -- process-oriented, autonomy-oriented, and mechanism-oriented -- through a comprehensive framework that connects foundational capabilities, core processes, and domain-specific realizations. Building on this framework, we (i) trace the evolution of AI for Science, (ii) identify five core capabilities underpinning scientific agency, (iii) model discovery as a dynamic four-stage workflow, (iv) review applications across the above domains, and (v) synthesize key challenges and future opportunities. This work establishes a domain-oriented synthesis of autonomous scientific discovery and positions Agentic Science as a structured paradigm for advancing AI-driven research.

A key challenge in artificial intelligence is the creation of systems capable of autonomously advancing scientific understanding by exploring novel domains, identifying complex patterns, and uncovering previously unseen connections in vast scientific data. In this work, we present SciAgents, an approach that leverages three core concepts: (1) the use of large-scale ontological knowledge graphs to organize and interconnect diverse scientific concepts, (2) a suite of large language models (LLMs) and data retrieval tools, and (3) multi-agent systems with in-situ learning capabilities. Applied to biologically inspired materials, SciAgents reveals hidden interdisciplinary relationships that were previously considered unrelated, achieving a scale, precision, and exploratory power that surpasses traditional human-driven research methods. The framework autonomously generates and refines research hypotheses, elucidating underlying mechanisms, design principles, and unexpected material properties. By integrating these capabilities in a modular fashion, the intelligent system yields material discoveries, critique and improve existing hypotheses, retrieve up-to-date data about existing research, and highlights their strengths and limitations. Our case studies demonstrate scalable capabilities to combine generative AI, ontological representations, and multi-agent modeling, harnessing a `swarm of intelligence' similar to biological systems. This provides new avenues for materials discovery and accelerates the development of advanced materials by unlocking Nature's design principles.

High throughput experimentation tools, machine learning (ML) methods, and open material databases are radically changing the way new materials are discovered. From the experimentally driven approach in the past, we are moving quickly towards the artificial intelligence (AI) driven approach, realizing the 'inverse design' capabilities that allow the discovery of new materials given the desired properties. This review aims to discuss different principles of AI-driven generative models that are applicable for materials discovery, including different materials representations available for this purpose. We will also highlight specific applications of generative models in designing new catalysts, semiconductors, polymers, or crystals while addressing challenges such as data scarcity, computational cost, interpretability, synthesizability, and dataset biases. Emerging approaches to overcome limitations and integrate AI with experimental workflows will be discussed, including multimodal models, physics informed architectures, and closed-loop discovery systems. This review aims to provide insights for researchers aiming to harness AI's transformative potential in accelerating materials discovery for sustainability, healthcare, and energy innovation.

Autoresearch offers a flexible paradigm for automating scientific tasks, in which an AI agent proposes, implements, evaluates, and refines candidate solutions against a quantitative objective. Here, we use composition-based materials-property prediction to test whether such agents can perform a task beyond model selection and hyperparameter optimization: the design of input descriptors. We introduce Automat, an autoresearch framework where a coding agent based on a large language model generates composition-only descriptors for chemical compounds and evaluates them using a random forest workflow. The agent is restricted to information derivable from chemical formulas and iteratively proposes, implements, and tests chemically motivated descriptor strategies. We apply Automat, with OpenAI Codex using GPT-5.5 as the coding agent, to the prediction of experimental band gaps in inorganic materials and Curie temperatures in ferromagnetic compounds. In both tasks, Automat improves over fractional-composition, Magpie, and combined fractional-composition/Magpie baselines, while producing descriptor families that are chemically interpretable. These results provide a demonstration that autoresearch agents can generate competitive, task-specific materials descriptors without manual feature engineering during the run. They also reveal current limitations, including descriptor redundancy, sensitivity to greedy feature expansion, and the need for explicit complexity control, descriptor pruning, and more sophisticated search strategies.

The recent advent of autonomous laboratories, coupled with algorithms for high-throughput screening and active learning, promises to accelerate materials discovery and innovation. As these autonomous systems grow in complexity, the demand for robust and efficient workflow management software becomes increasingly critical. In this paper, we introduce AlabOS, a general-purpose software framework for orchestrating experiments and managing resources, with an emphasis on automated laboratories for materials synthesis and characterization. AlabOS features a reconfigurable experiment workflow model and a resource reservation mechanism, enabling the simultaneous execution of varied workflows composed of modular tasks while eliminating conflicts between tasks. To showcase its capability, we demonstrate the implementation of AlabOS in a prototype autonomous materials laboratory, A-Lab, with around 3,500 samples synthesized over 1.5 years.

Complex chemical space and limited knowledge scope with biases holds immense challenge for human scientists, yet in automated materials discovery. Existing intelligent methods relies more on numerical computation, leading to inefficient exploration and results with hard-interpretability. To bridge this gap, we introduce a principles-guided material discovery system powered by language inferential multi-agent system (MAS), namely PriM. Our framework integrates automated hypothesis generation with experimental validation in a roundtable system of MAS, enabling systematic exploration while maintaining scientific rigor. Based on our framework, the case study of nano helix demonstrates higher materials exploration rate and property value while providing transparent reasoning pathways. This approach develops an automated-and-transparent paradigm for material discovery, with broad implications for rational design of functional materials. Code is publicly available at our https://github.com/amair-lab/PriM{GitHub}.

We introduce PARC, a coding agent for the autonomous and robust execution of long-horizon computational tasks. PARC is built on a hierarchical multi-agent architecture incorporating task planning, execution, and a mechanism that evaluates its own actions and their outcomes from an independent context and provides feedback, namely self-assessment and self-feedback. This design enables PARC to detect and correct high-level strategic errors and sustain progress without human intervention. We evaluate PARC across computational science and data science tasks. In materials science, it autonomously reproduces key results from studies on lithium-ion conduction and alloy segregation. In particular, it coordinates dozens of parallel simulation tasks, each requiring roughly 43 hours of computation, managing orchestration, monitoring, and error correction end-to-end. In Kaggle-based experiments, starting from minimal natural-language instructions, PARC conducts data analysis and implements search strategies, producing solutions competitive with human-engineered baselines. These results highlight the potential of integrating a hierarchical multi-agent system with self-assessment and self-feedback to enable AI systems capable of independent, large-scale scientific and analytical work.

Materials discovery is a cornerstone of modern technological advancement, yet it remains constrained by traditional trial-and-error paradigms and the inherent bias of human intuition. Artificial intelligence (AI) has emerged as a transformative tool in materials science by effectively modeling structure-property relationships. Despite substantial efforts to enhance model expressiveness, data efficiency remains an equally critical challenge, given the limited availability of experimental and computational resources. Active learning (AL), as a data-driven machine learning paradigm, has shown great promise for discovering novel materials and enabling the efficient navigation of vast materials spaces. In this review, we follow the evolution of sampling strategy design techniques in AL, from Bayesian optimization to advanced deep learning-based strategies. We then highlight how AL enhances data efficiency across various data regimes, ranging from task-specific settings with limited data to the development of general-purpose datasets and large-scale models. We further provide a systematic overview of AL applications throughout the materials research pipeline, including computational simulation, composition and structural design, process optimization, and self-driving laboratory systems. Finally, we pinpoint key challenges and future perspectives of AL in materials discovery.

Materials research advances through accumulated experience - scripts that work, protocols that are trusted, warnings attached to failed calculations or experiments, and judgement that links a new question to an old result. This experience is essential for reproducibility and knowledge transfer, yet it is usually fragmented across notebooks, repositories, job logs and individual memory, and it is rarely portable across artificial-intelligence agents. Here we argue that a lifelong AI partner for materials science can be designed around persistent memory rather than around a particular agent implementation. We introduce a self-evolving memory framework that stores scientific experience as inspectable facts and executable skills, so that observations, failure boundaries, protocols and validation checks can be retrieved, revised and migrated across models. We evaluate the idea in three computational settings that expose different layers of materials-research competence. In 49 real-world materials-tool-use questions comprising 138 executable subtasks, memory nearly doubles GPT-5.2 task success without model-parameter updates. In elemental-solid equation-of-state calculations, memory converts a wavefunction-initialization failure into a pre-execution guardrail, improving outcomes from 22/1/4 to 25/2/0 Correct/Partial/Error and avoiding 92% of repeated errors. In 13 practical material simulation workflows, remembered skills and failure facts halve the aggregate trace burden (tokens) and reduce tool calls by over a factor of two by the third round, while preserving physically meaningful outputs in band-gap, phonon, vacancy and work-function analyses. These results show that agent memory can serve as a durable scientific asset; a portable, self-improving record of materials-research experience that outlives any single model or agent stack.

The history of science is punctuated by serendipitous discoveries, where unexpected observations, rather than targeted hypotheses, opened new fields of inquiry. While modern autonomous laboratories excel at accelerating hypothesis testing, their optimization for efficiency risks overlooking these crucial, unplanned findings. To address this gap, we introduce SciLink, an open-source, multi-agent artificial intelligence framework designed to operationalize serendipity in materials research by creating a direct, automated link between experimental observation, novelty assessment, and theoretical simulations. The framework employs a hybrid AI strategy where specialized machine learning models perform quantitative analysis of experimental data, while large language models handle higher-level reasoning. These agents autonomously convert raw data from materials characterization techniques into falsifiable scientific claims, which are then quantitatively scored for novelty against the published literature. We demonstrate the framework's versatility across diverse research scenarios, showcasing its application to atomic-resolution and hyperspectral data, its capacity to integrate real-time human expert guidance, and its ability to close the research loop by proposing targeted follow-up experiments. By systematically analyzing all observations and contextualizing them, SciLink provides a practical framework for AI-driven materials research that not only enhances efficiency but also actively cultivates an environment ripe for serendipitous discoveries, thereby bridging the gap between automated experimentation and open-ended scientific exploration.

Artificial intelligence is transforming computational materials science, improving the prediction of material properties, and accelerating the discovery of novel materials. Recently, publicly available material data repositories have grown rapidly. This growth encompasses not only more materials, but also a greater variety and quantity of their associated properties. Existing machine learning efforts in materials science focus primarily on single-modality tasks, i.e., relationships between materials and a single physical property, thus not taking advantage of the rich and multimodal set of material properties. Here, we introduce Multimodal Learning for Materials (MultiMat), which enables self-supervised multi-modality training of foundation models for materials. We demonstrate our framework's potential using data from the Materials Project database on multiple axes: (i) MultiMat achieves state-of-the-art performance for challenging material property prediction tasks; (ii) MultiMat enables novel and accurate material discovery via latent space similarity, enabling screening for stable materials with desired properties; and (iii) MultiMat encodes interpretable emergent features that may provide novel scientific insights.

Reducing hallucination of Large Language Models (LLMs) is imperative for use in the sciences where reproducibility is crucial. However, LLMs inherently lack long-term memory, making it a nontrivial, ad hoc, and inevitably biased task to fine-tune them on domain-specific literature and data. Here we introduce LLaMP, a multimodal retrieval-augmented generation (RAG) framework of multiple data-aware reasoning-and-acting (ReAct) agents that dynamically interact with computational and experimental data on Materials Project (MP). Without fine-tuning, LLaMP demonstrates an ability to comprehend and integrate various modalities of materials science concepts, fetch relevant data stores on the fly, process higher-order data (such as crystal structures and elastic tensors), and summarize multi-step procedures for solid-state synthesis. We show that LLaMP effectively corrects errors in GPT-3.5's intrinsic knowledge, reducing a 5.21% MAPE on frequently-documented bandgaps and a significant 1103.54% MAPE on formation energies -- errors that GPT-3.5 seems to derive from mixed data sources. Additionally, LLaMP substantially reduces the hallucinated volumetric strain in a diamond cubic silicon structure from 66.3% to 0. The proposed framework offers an intuitive and nearly hallucination-free approach to exploring materials informatics and establishes a pathway for knowledge distillation and fine-tuning other language models. We envision the framework as a valuable component for scientific hypotheses and a foundation for future autonomous laboratories where multiple LLM agents communicate and cooperate with robotics to drive material synthesis and chemical reactions without hard-coded human logic and intervention.

Scientific discovery is poised for rapid advancement through advanced robotics and artificial intelligence. Current scientific practices face substantial limitations as manual experimentation remains time-consuming and resource-intensive, while multidisciplinary research demands knowledge integration beyond individual researchers' expertise boundaries. Here, we envision an autonomous generalist scientist (AGS) concept combines agentic AI and embodied robotics to automate the entire research lifecycle. This system could dynamically interact with both physical and virtual environments while facilitating the integration of knowledge across diverse scientific disciplines. By deploying these technologies throughout every research stage -- spanning literature review, hypothesis generation, experimentation, and manuscript writing -- and incorporating internal reflection alongside external feedback, this system aims to significantly reduce the time and resources needed for scientific discovery. Building on the evolution from virtual AI scientists to versatile generalist AI-based robot scientists, AGS promises groundbreaking potential. As these autonomous systems become increasingly integrated into the research process, we hypothesize that scientific discovery might adhere to new scaling laws, potentially shaped by the number and capabilities of these autonomous systems, offering novel perspectives on how knowledge is generated and evolves. The adaptability of embodied robots to extreme environments, paired with the flywheel effect of accumulating scientific knowledge, holds the promise of continually pushing beyond both physical and intellectual frontiers.

Scientific progress depends on a repeated loop of exploration, experimentation, and abstraction. Researchers test candidate directions, interpret the evidence, and carry the resulting lessons into later attempts. We study how an AI agent can run this loop autonomously over long horizons. We introduce Arbor, a general framework for autonomous research that combines a long-lived coordinator, short-lived executors, and Hypothesis Tree Refinement (HTR), a persistent tree that links hypotheses, artifacts, evidence, and distilled insights across time. The coordinator manages global research strategy over the tree, while executors implement and test individual hypotheses in isolated worktrees. As results return, Arbor updates the tree, propagates reusable lessons, refines the search frontier, and admits verified improvements. This design turns autonomous research from a sequence of local attempts into a cumulative process in which strategy, execution, and evidence are carried across time. We evaluate Arbor under Autonomous Optimization (AO), an operational setting where an agent improves an initial research artifact through iterative experimentation without step-level human supervision. Across six real research tasks in model training, harness engineering, and data synthesis, Arbor achieves the best held-out result on all six tasks, attaining more than 2.5x the average relative held-out gain of Codex and Claude Code under the same task interface and resource budget. On MLE-Bench Lite, Arbor reaches 86.36% Any Medal with GPT-5.5, the strongest result in our comparison.

Material discovery is a critical research area with profound implications for various industries. In this work, we introduce MatExpert, a novel framework that leverages Large Language Models (LLMs) and contrastive learning to accelerate the discovery and design of new solid-state materials. Inspired by the workflow of human materials design experts, our approach integrates three key stages: retrieval, transition, and generation. First, in the retrieval stage, MatExpert identifies an existing material that closely matches the desired criteria. Second, in the transition stage, MatExpert outlines the necessary modifications to transform this material formulation to meet specific requirements outlined by the initial user query. Third, in the generation state, MatExpert performs detailed computations and structural generation to create new materials based on the provided information. Our experimental results demonstrate that MatExpert outperforms state-of-the-art methods in material generation tasks, achieving superior performance across various metrics including validity, distribution, and stability. As such, MatExpert represents a meaningful advancement in computational material discovery using langauge-based generative models.

Alloy discovery is central to advancing modern industry but remains hindered by the vastness of compositional design space and the costly validation. Here, we present AutoMAT, a hierarchical and autonomous framework grounded in and validated by experiments, which integrates large language models, automated CALPHAD-based simulations, and AI-driven search to accelerate alloy design. Spanning the entire pipeline from ideation to validation, AutoMAT achieves high efficiency, accuracy, and interpretability without the need for manually curated large datasets. In a case study targeting a lightweight, high-strength alloy, AutoMAT identifies a titanium alloy with 8.1% lower density and comparable yield strength relative to the state-of-the-art reference, achieving the highest specific strength among all comparisons. In a second case targeting high-yield-strength high-entropy alloys, AutoMAT achieves a 28.2% improvement in yield strength over the base alloy. In both cases, AutoMAT reduces the discovery timeline from years to weeks, illustrating its potential as a scalable and versatile platform for next-generation alloy design.

Automating scientific discovery requires more than generating papers from ideas. Real research is iterative: hypotheses are challenged from multiple perspectives, experiments fail and inform the next attempt, and lessons accumulate across cycles. Existing autonomous research systems often model this process as a linear pipeline: they rely on single-agent reasoning, stop when execution fails, and do not carry experience across runs. We present AutoResearchClaw, a multi-agent autonomous research pipeline built on five mechanisms: structured multi-agent debate for hypothesis generation and result analysis, a self-healing executor with a Pivot/Refine decision loop that transforms failures into information, verifiable result reporting that prevents fabricated numbers and hallucinated citations, human-in-the-loop collaboration with seven intervention modes spanning full autonomy to step-by-step oversight, and cross-run evolution that converts past mistakes into future safeguards. On ARC-Bench, a 25-topic experiment-stage benchmark, AutoResearchClaw outperforms AI Scientist v2 by 54.7%. A human-in-the-loop ablation across seven intervention modes reveals that precise, targeted collaboration at high-leverage decision points consistently outperforms both full autonomy and exhaustive step-by-step oversight. We position AutoResearchClaw as a research amplifier that augments rather than replaces human scientific judgment. Code is available at https://github.com/aiming-lab/AutoResearchClaw.

The powerful reasoning capabilities of Large Language Models (LLMs) in mathematics and coding, combined with their ability to automate complex tasks through agentic frameworks, present unprecedented opportunities for accelerating scientific innovation. In this paper, we introduce AI-Researcher, a fully autonomous research system that transforms how AI-driven scientific discovery is conducted and evaluated. Our framework seamlessly orchestrates the complete research pipeline--from literature review and hypothesis generation to algorithm implementation and publication-ready manuscript preparation--with minimal human intervention. To rigorously assess autonomous research capabilities, we develop Scientist-Bench, a comprehensive benchmark comprising state-of-the-art papers across diverse AI research domains, featuring both guided innovation and open-ended exploration tasks. Through extensive experiments, we demonstrate that AI-Researcher achieves remarkable implementation success rates and produces research papers that approach human-level quality. This work establishes new foundations for autonomous scientific innovation that can complement human researchers by systematically exploring solution spaces beyond cognitive limitations.

The integration of Agentic AI into scientific discovery marks a new frontier in research automation. These AI systems, capable of reasoning, planning, and autonomous decision-making, are transforming how scientists perform literature review, generate hypotheses, conduct experiments, and analyze results. This survey provides a comprehensive overview of Agentic AI for scientific discovery, categorizing existing systems and tools, and highlighting recent progress across fields such as chemistry, biology, and materials science. We discuss key evaluation metrics, implementation frameworks, and commonly used datasets to offer a detailed understanding of the current state of the field. Finally, we address critical challenges, such as literature review automation, system reliability, and ethical concerns, while outlining future research directions that emphasize human-AI collaboration and enhanced system calibration.

Materials synthesis is vital for innovations such as energy storage, catalysis, electronics, and biomedical devices. Yet, the process relies heavily on empirical, trial-and-error methods guided by expert intuition. Our work aims to support the materials science community by providing a practical, data-driven resource. We have curated a comprehensive dataset of 17K expert-verified synthesis recipes from open-access literature, which forms the basis of our newly developed benchmark, AlchemyBench. AlchemyBench offers an end-to-end framework that supports research in large language models applied to synthesis prediction. It encompasses key tasks, including raw materials and equipment prediction, synthesis procedure generation, and characterization outcome forecasting. We propose an LLM-as-a-Judge framework that leverages large language models for automated evaluation, demonstrating strong statistical agreement with expert assessments. Overall, our contributions offer a supportive foundation for exploring the capabilities of LLMs in predicting and guiding materials synthesis, ultimately paving the way for more efficient experimental design and accelerated innovation in materials science.

Large Language Models (LLMs) promise to accelerate discovery by reasoning across the expanding scientific landscape. Yet, the challenge is no longer access to information but connecting it in meaningful, domain-spanning ways. In materials science, where innovation demands integrating concepts from molecular chemistry to mechanical performance, this is especially acute. Neither humans nor single-agent LLMs can fully contend with this torrent of information, with the latter often prone to hallucinations. To address this bottleneck, we introduce a multi-agent framework guided by large-scale knowledge graphs to find sustainable substitutes for per- and polyfluoroalkyl substances (PFAS)-chemicals currently under intense regulatory scrutiny. Agents in the framework specialize in problem decomposition, evidence retrieval, design parameter extraction, and graph traversal, uncovering latent connections across distinct knowledge pockets to support hypothesis generation. Ablation studies show that the full multi-agent pipeline outperforms single-shot prompting, underscoring the value of distributed specialization and relational reasoning. We demonstrate that by tailoring graph traversal strategies, the system alternates between exploitative searches focusing on domain-critical outcomes and exploratory searches surfacing emergent cross-connections. Illustrated through the exemplar of biomedical tubing, the framework generates sustainable PFAS-free alternatives that balance tribological performance, thermal stability, chemical resistance, and biocompatibility. This work establishes a framework combining knowledge graphs with multi-agent reasoning to expand the materials design space, showcasing several initial design candidates to demonstrate the approach.

AI has long assisted scientific research, but the rapid advance of LLMs and agentic scaffolds is reshaping the landscape; a single system can now carry whole-stage research from an initial hypothesis all the way to final published paper, which is a paradigm now referred to as AutoResearch. Existing evaluations reveal little about how these agents operate or where they break down. Tasks are narrowly-scoped, evaluation measures performance but not process, and failure diagnoses lack systematic coverage or artifact-level visibility. To address this gap, we introduce AutoResearchEval, featuring 100 tasks grounded in published frontier science across 7 scientific domains and the full research lifecycle, including ideation, retrieval, execution, analysis, writing, and review. Evaluating 8 harness-model combinations yields 800 autoresearch agent trajectories, with process-level annotation. We organize these insights into AutoResearch Failure Taxonomy or ARFT, a framework of 45 empirically-grounded failure patterns. To enable scalable fine-grained attribution, we leverage a human-calibrated agent-as-a-judge pipeline to inspect complete trajectories and intermediate artifacts. Failure patterns converge on a single overarching limitation, namely that current agents lack a metacognitive loop, which entails the ability to check what they produced against what they found, revise when it does not hold up, and question whether the path they took was sound. The same patterns recur across all 8 harness-model combinations, including the strongest models tested, locating the deficit at the model level rather than in any particular scaffold; whether orchestration-level interventions can close it is an open question this work does not test. We publicly release AutoResearchEval and ARFT to facilitate continued research and development in autonomous scientific discovery.

We present formulation and open-source tools to achieve in-material model predictive control of sensor/actuator systems using learned forward kinematics and on-device computation. Microcontroller units (MCUs) that compute the prediction and control task while colocated with the sensors and actuators enable in-material untethered behaviors. In this approach, small parameter size neural network models learn forward kinematics offline. Our open-source compiler, nn4mc, generates code to offload these predictions onto MCUs. A Newton-Raphson solver then computes the control input in real time. We first benchmark this nonlinear control approach against a PID controller on a mass-spring-damper simulation. We then study experimental results on two experimental rigs with different sensing, actuation and computational hardware: a tendon-based platform with embedded LightLace sensors and a HASEL-based platform with magnetic sensors. Experimental results indicate effective high-bandwidth tracking of reference paths (greater than or equal to 120 Hz) with a small memory footprint (less than or equal to 6.4% of flash memory). The measured path following error does not exceed 2mm in the tendon-based platform. The simulated path following error does not exceed 1mm in the HASEL-based platform. The mean power consumption of this approach in an ARM Cortex-M4f device is 45.4 mW. This control approach is also compatible with Tensorflow Lite models and equivalent on-device code. In-material intelligence enables a new class of composites that infuse autonomy into structures and systems with refined artificial proprioception.

The advent of artificial intelligence (AI) has enabled a comprehensive exploration of materials for various applications. However, AI models often prioritize frequently encountered materials in the scientific literature, limiting the selection of suitable candidates based on inherent physical and chemical properties. To address this imbalance, we have generated a dataset of 1,494,017 natural language-material paragraphs based on combined OQMD, Materials Project, JARVIS, COD and AFLOW2 databases, which are dominated by ab initio calculations and tend to be much more evenly distributed on the periodic table. The generated text narratives were then polled and scored by both human experts and ChatGPT-4, based on three rubrics: technical accuracy, language and structure, and relevance and depth of content, showing similar scores but with human-scored depth of content being the most lagging. The merger of multi-modality data sources and large language model (LLM) holds immense potential for AI frameworks to help the exploration and discovery of solid-state materials for specific applications.

Materials discovery and design are essential for advancing technology across various industries by enabling the development of application-specific materials. Recent research has leveraged Large Language Models (LLMs) to accelerate this process. We explore the potential of LLMs to generate viable hypotheses that, once validated, can expedite materials discovery. Collaborating with materials science experts, we curated a novel dataset from recent journal publications, featuring real-world goals, constraints, and methods for designing real-world applications. Using this dataset, we test LLM-based agents that generate hypotheses for achieving given goals under specific constraints. To assess the relevance and quality of these hypotheses, we propose a novel scalable evaluation metric that emulates the process a materials scientist would use to evaluate a hypothesis critically. Our curated dataset, proposed method, and evaluation framework aim to advance future research in accelerating materials discovery and design with LLMs.

Autonomous scientific research agents are increasingly applied to end-to-end scientific workflows, including literature review, data analysis, experimentation, and report generation. However, open-ended research tasks often do not clearly specify the analyses, methods, and success criteria required to complete the task. As a result, agents may miss important analyses, use inappropriate methods, or draw conclusions that are insufficiently supported by evidence. To address the problem, we present AutoSciRub, an evaluation-first framework that induces a task-specific executable rubric before research execution, and uses it to guide execution, criterion-level verification as well as iterative revision. AutoSciRub decomposes an underspecified instruction into atomic scientific goals, grounds them in relevant literature and task-visible data, and synthesizes specific, actionable, and verifiable criteria. The resulting rubric makes implicit experimental and evidential requirements explicit, providing guidance for experiments and analyses. During revision, rubric-guided verification identifies unmet criteria and enables targeted refinement of the research report and its supporting artifacts. On ResearchClawBench, AutoSciRub consistently improves all tested configurations, with an average gain of 2.08 points across three backbone LLMs under the fixed Codex harness and 2.95 points across three agent harnesses using a fixed DeepSeek-V4-Flash backbone. On a randomly sampled 20-task subset of AstaBench E2E Discovery, AutoSciRub further achieves an average improvement of 16.8 points across three agent harnesses, while maintaining or increasing the number of successfully completed tasks. These results demonstrate that evaluation-first guidance provides an effective and generalizable control mechanism for autonomous scientific research (Code: https://github.com/zjunlp/AutoSciRub).

Large language models (LLMs) have shown promising potential in scientific research, enabling tasks ranging from knowledge retrieval to property prediction. Existing science benchmarks mainly focus on perceptual or knowledge-based tasks, largely ignoring the modelling tasks, a fundamental starting point for any real scientific research. For materials science, constructing and manipulating atomic structures is one of the most creative and least automated steps. In this work, we introduce AtomWorld, a benchmark designed to evaluate the abilities of LLMs on structure modifications. The benchmark includes ten fundamental actions under four widely used modelling categories, enabling verifiable evaluation metrics. We find that Claude Opus 4.6 generally performs the best. While the success rate decreases markedly with increasing modelling complexity, with particularly low success rates (below 12\% for rotation) for operations involving complex spatial relations. Our results suggest that contemporary LLMs are better suited as copilots for materials structure modelling rather than fully unsupervised autonomous scientific agents. Beyond evaluation, AtomWorld also serves as a testbed and playground for developing future structure-aware models, including reinforcement learning and agentic approaches.

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

High-throughput data generation methods and machine learning (ML) algorithms have given rise to a new era of computational materials science by learning relationships among composition, structure, and properties and by exploiting such relations for design. However, to build these connections, materials data must be translated into a numerical form, called a representation, that can be processed by a machine learning model. Datasets in materials science vary in format (ranging from images to spectra), size, and fidelity. Predictive models vary in scope and property of interests. Here, we review context-dependent strategies for constructing representations that enable the use of materials as inputs or outputs of machine learning models. Furthermore, we discuss how modern ML techniques can learn representations from data and transfer chemical and physical information between tasks. Finally, we outline high-impact questions that have not been fully resolved and thus, require further investigation.

We present Claw AI Lab, a lab-native autonomous research platform that advances automated research from a hidden prompt-to-paper pipeline into an interactive AI laboratory. Rather than centering the system around a single agent or a fixed serial workflow, we allow users to instantiate a full research team from one prompt, with customizable roles, collaborative workflows, real-time monitoring, artifact inspection, and rollback/resume control through a unified dashboard. The platform also supports distinct research modes for exploration, multi-agent discussion, and reproduction, making autonomous research substantially more steerable and laboratory-like in practice. A key practical contribution of Claw AI Lab lies in its Claw-Code Harness, which connects local codebases, datasets, and checkpoints to runnable experiments and feeds execution artifacts back into the research loop. As a result, the harness improves not only execution integration, but also experimental completion and result integrity: experiments are easier to inspect, iterate on, and faithfully transfer into final papers, reducing common failure modes such as partial runs and malformed result reporting. In our internal evaluation on five AI research case studies, using AutoResearchClaw as the baseline, Claw AI Lab is consistently preferred by AI expert judges on idea novelty, experiment completeness, and paper presentation quality. We view Claw AI Lab as an early step toward a new paradigm: autonomous research as usable, interactive, and reliability-aware scientific infrastructure.

Autonomous research systems are increasingly capable of executing long research workflows, yet automation alone does not ensure that the resulting process remains scientifically grounded. We introduce AutoResearch, a two-stage system that connects Idea Generation with Idea Execution to address both how research ideas are formed and how they are reliably established through experimentation. In Idea Generation, AutoResearch continuously integrates emerging research signals with accumulated domain knowledge, identifies transferable mechanistic insights, and uses multi-model generation and cross-review to produce grounded, testable research plans. In Idea Execution, coordinated agents decompose these plans into experiments, iteratively implement and diagnose them, and employ independent evidence-based review before accepting research conclusions. Across representative settings in cross-modal retrieval, systems optimization, and benchmark-driven machine learning, AutoResearch turns generated ideas into measurable progress, detects and corrects unreliable experimental results, and makes evidence-conditioned decisions to continue, revise, or terminate research directions. For example, on RSICD benchmark, an AutoResearch-generated idea improves mean Recall from 32.84 to 34.69, while recording only 5 audit-confirmed issue events compared with 11-27 for other autonomous research systems. These results demonstrate a research process in which meaningful insight is grounded before experimentation and conclusions are grounded before acceptance: Insight In, Hallucination Out.

The ability to discover new materials with desirable properties is critical for numerous applications from helping mitigate climate change to advances in next generation computing hardware. AI has the potential to accelerate materials discovery and design by more effectively exploring the chemical space compared to other computational methods or by trial-and-error. While substantial progress has been made on AI for materials data, benchmarks, and models, a barrier that has emerged is the lack of publicly available training data and open pre-trained models. To address this, we present a Meta FAIR release of the Open Materials 2024 (OMat24) large-scale open dataset and an accompanying set of pre-trained models. OMat24 contains over 110 million density functional theory (DFT) calculations focused on structural and compositional diversity. Our EquiformerV2 models achieve state-of-the-art performance on the Matbench Discovery leaderboard and are capable of predicting ground-state stability and formation energies to an F1 score above 0.9 and an accuracy of 20 meV/atom, respectively. We explore the impact of model size, auxiliary denoising objectives, and fine-tuning on performance across a range of datasets including OMat24, MPtraj, and Alexandria. The open release of the OMat24 dataset and models enables the research community to build upon our efforts and drive further advancements in AI-assisted materials science.

Autonomous scientific research is significantly advanced thanks to the development of AI agents. One key step in this process is finding the right scientific literature, whether to explore existing knowledge for a research problem, or to acquire evidence for verifying assumptions and supporting claims. To assess AI agents' capability in driving this process, we present AutoResearchBench, a dedicated benchmark for autonomous scientific literature discovery. AutoResearchBench consists of two complementary task types: (1) Deep Research, which requires tracking down a specific target paper through a progressive, multi-step probing process, and (2) Wide Research, which requires comprehensively collecting a set of papers satisfying given conditions. Compared to previous benchmarks on agentic web browsing, AutoResearchBench is distinguished along three dimensions: it is research-oriented, calling for in-depth comprehension of scientific concepts; literature-focused, demanding fine-grained utilization of detailed information; and open-ended, involving an unknown number of qualified papers and thus requiring deliberate reasoning and search throughout. These properties make AutoResearchBench uniquely suited for evaluating autonomous research capabilities, and extraordinarily challenging. Even the most powerful LLMs, despite having largely conquered general agentic web-browsing benchmarks such as BrowseComp, achieve only 9.39% accuracy on Deep Research and 9.31% IoU on Wide Research, while many other strong baselines fall below 5%. We publicly release the dataset and evaluation pipeline to facilitate future research in this direction. We publicly release the dataset, evaluation pipeline, and code at https://github.com/CherYou/AutoResearchBench.

The advent of material databases provides an unprecedented opportunity to uncover predictive descriptors for emergent material properties from vast data space. However, common reliance on high-throughput ab initio data necessarily inherits limitations of such data: mismatch with experiments. On the other hand, experimental decisions are often guided by an expert's intuition honed from experiences that are rarely articulated. We propose using machine learning to "bottle" such operational intuition into quantifiable descriptors using expertly curated measurement-based data. We introduce "Materials Expert-Artificial Intelligence" (ME-AI) to encapsulate and articulate this human intuition. As a first step towards such a program, we focus on the topological semimetal (TSM) among square-net materials as the property inspired by the expert-identified descriptor based on structural information: the tolerance factor. We start by curating a dataset encompassing 12 primary features of 879 square-net materials, using experimental data whenever possible. We then use Dirichlet-based Gaussian process regression using a specialized kernel to reveal composite descriptors for square-net topological semimetals. The ME-AI learned descriptors independently reproduce expert intuition and expand upon it. Specifically, new descriptors point to hypervalency as a critical chemical feature predicting TSM within square-net compounds. Our success with a carefully defined problem points to the "machine bottling human insight" approach as promising for machine learning-aided material discovery.

Accelerating materials discovery requires AI systems that can generate scientifically valid hypotheses through multi-step, domain-grounded reasoning. Standard large language models often produce fluent but weakly traceable responses to open-ended materials design problems, making it difficult to determine whether final answers are supported by coherent intermediate reasoning. We develop Graph-PRefLexOR, a family of graph-native reasoning models fine-tuned with Group Relative Policy Optimization (GRPO) to organize reasoning into explicit phases for mechanism exploration, graph construction, pattern extraction, and hypothesis synthesis. This design links neural language generation with symbolic relational structure, enabling causal connections to be constructed, inspected, and reused. On 100 open-ended questions from materials science and mechanics literature, Graph-PRefLexOR achieves 40-65% improvements over corresponding base models, with the largest gains in reasoning traceability. Embedding analyses show broader semantic exploration and approximately 2-3 times greater semantic diversity than baselines. Semantic backtracking and layer-wise hidden-state analyses further show stronger alignment between structured reasoning and final answers. Finally, test-time graph expansion reveals that additional compute primarily increases long-range conceptual recombination within a bounded semantic space, rather than simply expanding semantic coverage. These results establish graph-native reinforcement learning as a pathway toward interpretable AI systems for scientific hypothesis generation in materials design and other scientific applications.

We report a flexible multi-modal mechanics language model, MeLM, applied to solve various nonlinear forward and inverse problems, that can deal with a set of instructions, numbers and microstructure data. The framework is applied to various examples including bio-inspired hierarchical honeycomb design, carbon nanotube mechanics, and protein unfolding. In spite of the flexible nature of the model-which allows us to easily incorporate diverse materials, scales, and mechanical features-it performs well across disparate forward and inverse tasks. Based on an autoregressive attention-model, MeLM effectively represents a large multi-particle system consisting of hundreds of millions of neurons, where the interaction potentials are discovered through graph-forming self-attention mechanisms that are then used to identify relationships from emergent structures, while taking advantage of synergies discovered in the training data. We show that the model can solve complex degenerate mechanics design problems and determine novel material architectures across a range of hierarchical levels, providing an avenue for materials discovery and analysis. Looking beyond the demonstrations reported in this paper, we discuss other opportunities in applied mechanics and general considerations about the use of large language models in modeling, design, and analysis that can span a broad spectrum of material properties from mechanical, thermal, optical, to electronic.

Advancements in machine learning and artificial intelligence are transforming materials discovery. Yet, the availability of structured experimental data remains a bottleneck. The vast corpus of scientific literature presents a valuable and rich resource of such data. However, manual dataset creation from these resources is challenging due to issues in maintaining quality and consistency, scalability limitations, and the risk of human error and bias. Therefore, in this work, we develop a chemist AI agent, powered by large language models (LLMs), to overcome these challenges by autonomously creating structured datasets from natural language text, ranging from sentences and paragraphs to extensive scientific research articles. Our chemist AI agent, Eunomia, can plan and execute actions by leveraging the existing knowledge from decades of scientific research articles, scientists, the Internet and other tools altogether. We benchmark the performance of our approach in three different information extraction tasks with various levels of complexity, including solid-state impurity doping, metal-organic framework (MOF) chemical formula, and property relations. Our results demonstrate that our zero-shot agent, with the appropriate tools, is capable of attaining performance that is either superior or comparable to the state-of-the-art fine-tuned materials information extraction methods. This approach simplifies compilation of machine learning-ready datasets for various materials discovery applications, and significantly ease the accessibility of advanced natural language processing tools for novice users in natural language. The methodology in this work is developed as an open-source software on https://github.com/AI4ChemS/Eunomia.

LLM-powered multi-agent systems can now automate the full research pipeline from ideation to paper writing, but a fundamental question remains: automation for whom? Researchers operate under different resource configurations, hold different methodological preferences, and target different output formats. A system that produces uniform outputs regardless of these differences will systematically under-serve every individual user, making personalization a precondition for research automation to be genuinely usable. However, achieving it requires three capabilities that current systems lack: accumulating reusable procedural knowledge across projects, retaining user-specific experience across sessions, and internalizing implicit preferences that resist explicit formalization. We propose NanoResearch, a multi-agent framework that addresses these gaps through tri-level co-evolution. A skill bank distills recurring operations into compact procedural rules reusable across projects. A memory module maintains user- and project-specific experience that grounds planning decisions in each user's research history. A label-free policy learning converts free-form feedback into persistent parameter updates of the planner, reshaping subsequent coordination. These three layers co-evolve: reliable skills produce richer memory, richer memory informs better planning, and preference internalization continuously realigns the loop to each user. Extensive experiments demonstrate that NanoResearch delivers substantial gains over state-of-the-art AI research systems, and progressively refines itself to produce better research at lower cost over successive cycles.

The key challenge in advancing multivalent-ion batteries lies in finding suitable intercalation hosts. Open-tunnel oxides, featuring one-dimensional channels or nanopores, show promise for enabling effective ion transport. However, the vast range of compositional possibilities renders traditional experimental and quantum-based methods impractical for large-scale studies. This work presents a generative AI framework that uses the Crystal Diffusion Variational Autoencoder (CDVAE) and a fine-tuned Large Language Model (LLM) to expedite the discovery of stable open-tunneled oxide materials for multivalent-ion batteries. By combining machine learning with data mining techniques, five promising transition metal oxide (TMO) structures are generated. These structures, known for forming open-tunnel oxide frameworks, are structurally validated through Density Functional Theory (DFT). The results show that the generated structures have lower formation energies compared to similar compositions in the Materials Project (MP) database, indicating improved thermodynamic stability. Additionally, the graph-based M3GNet model is employed to relax further generated structures, providing a more computationally efficient alternative to DFT. Machine learning-based predictions of formation energy, band gap, and energy above the hull refine the selection process, leading to the identification of materials with significant potential for real-world battery applications. This research demonstrates the power of generative AI in rapidly exploring the vast chemical space of TMOs, offering a new approach to discovering stable open-tunnel oxides for multivalent-ion batteries. The results highlight the potential of this approach to contribute to more sustainable energy storage technologies, addressing the growing concerns surrounding the scarcity of lithium.

Natural structural materials, such as bone and wood, can autonomously adapt their mechanical properties in response to loading to prevent failure. They smartly control the addition of material in locations of high stress by utilizing locally available resources guided by biological signals. On the contrary, synthetic structural materials have unchanging mechanical properties limiting their mechanical performance and service life. Here, a material system that autonomously adapts its mechanical properties in response to mechanical loading is reported inspired by the mineralization process of bone. It is observed that charges from piezoelectric scaffolds can induce mineralization from media with mineral ions. The material system adapts to mechanical loading by inducing mineral deposition in proportion to the magnitude of the loading and the resulting piezoelectric charges. Moreover, the mechanism allows a simple one-step route for making graded materials by controlling stress distribution along the scaffold. The findings can pave the way for a new class of self-adaptive materials that reinforce the region of high stress or induce deposition of minerals on the damaged areas from the increase in stress to prevent/mitigate failure. They can also contribute to addressing the current challenges of synthetic materials for load-bearing applications from self-adaptive capabilities.

Materials discovery and design aim to find compositions and structures with desirable properties over highly complex and diverse physical spaces. Traditional solutions, such as high-throughput simulations or machine learning, often rely on complex descriptors, which hinder generalizability and transferability across different material systems. Moreover, These descriptors may inadequately represent macro-scale material properties, which are influenced by structural imperfections and compositional variations in real-world samples, thus limiting their practical applicability. To address these challenges, we propose DARWIN 1.5, the largest open-source large language model tailored for materials science. By leveraging natural language as input, DARWIN eliminates the need for task-specific descriptors and enables a flexible, unified approach to material property prediction and discovery. Our approach integrates 6M material domain papers and 21 experimental datasets from 49,256 materials across modalities while enabling cross-task knowledge transfer. The enhanced model achieves up to 59.1% improvement in prediction accuracy over the base LLaMA-7B architecture and outperforms SOTA machine learning approaches across 8 materials design tasks. These results establish LLMs as a promising foundation for developing versatile and scalable models in materials science.

The most technologically consequential materials are often the rarest: they occupy narrow regions of chemical space, obey competing physical constraints, and appear only sparsely in existing databases. High-kappa dielectrics, high-Tc superconductors, and ferromagnetic insulators are to name a few. This scarcity fundamentally limits today's data-driven materials discovery, where machine-learning models excel at interpolation but struggle to generate genuinely new candidates. Here, we introduce DielecMIND, an artificial intelligence framework that reframes materials discovery as a reasoning-driven exploration instead of a database-screening problem. Using high-kappa dielectrics as a data-scarce and technologically stringent test case, DielecMIND combines large-language-model hypothesis generation for the first time with physics validated first-principles calculation to navigate chemical space beyond known compounds. Prior to our work, only 14 experimentally or computationally validated materials with kappa > 150 were known. Our framework discovers and validates 5 new such compounds, expanding this rare-materials class by a remarkable = 35% in a single study. Among them, we find that Ba2TiHfO6 exhibits a dielectric constant of 637, minimal loss at low optical frequencies, and stability up to 800 K. Beyond dielectrics, this work demonstrates a new paradigm for artificial-intelligence-guided discovery: one that generates a small number of physically grounded, experimentally plausible candidates yet measurably expands sparsely populated functional materials spaces. Thus, DielecMIND points toward a general strategy for discovering rare, high-impact functional materials where data scarcity has long constrained progress.

Effectively representing materials as text has the potential to leverage the vast advancements of large language models (LLMs) for discovering new materials. While LLMs have shown remarkable success in various domains, their application to materials science remains underexplored. A fundamental challenge is the lack of understanding of how to best utilize text-based representations for materials modeling. This challenge is further compounded by the absence of a comprehensive benchmark to rigorously evaluate the capabilities and limitations of these text representations in capturing the complexity of material systems. To address this gap, we propose MatText, a suite of benchmarking tools and datasets designed to systematically evaluate the performance of language models in modeling materials. MatText encompasses nine distinct text-based representations for material systems, including several novel representations. Each representation incorporates unique inductive biases that capture relevant information and integrate prior physical knowledge about materials. Additionally, MatText provides essential tools for training and benchmarking the performance of language models in the context of materials science. These tools include standardized dataset splits for each representation, probes for evaluating sensitivity to geometric factors, and tools for seamlessly converting crystal structures into text. Using MatText, we conduct an extensive analysis of the capabilities of language models in modeling materials. Our findings reveal that current language models consistently struggle to capture the geometric information crucial for materials modeling across all representations. Instead, these models tend to leverage local information, which is emphasized in some of our novel representations. Our analysis underscores MatText's ability to reveal shortcomings of text-based methods for materials design.

Autonomous scientific discovery systems offer the potential to accelerate research by automating the process of hypothesis generation and validation. However, current systems operate within constrained search spaces or require predefined research questions, limiting their capacity for true open-ended inquiry. Furthermore, while they generate hypotheses iteratively, they largely lack the ability to explicitly synthesize their own accumulated findings to uncover complex, interconnected phenomena. We introduce DiscoPER, an autonomous large language model-powered framework that conducts open-ended research by dynamically generating and executing code to explore datasets without pre-specified research objectives. To ensure rigorous scientific validity, every proposed discovery must pass statistical testing. To overcome the limitations of isolated search, our framework introduces a second-order reasoning mechanism that periodically analyzes its own accumulated discoveries. By treating prior discoveries as empirical data, DiscoPER identifies structural patterns, confounds, and epistemic gaps, actively redirecting hypothesis exploration toward uncharted regions of the search space. The search space is further expanded by incorporating tool use, enabling the system to explore hypotheses beyond structured metadata by seamlessly processing and extracting useful information from multimodal sources like images. Evaluated on iNatDisco, a new multimodal ecological knowledge benchmark with pattern-level ground truth obtained from peer-reviewed literature, DiscoPER recovers 8 of 9 known patterns with a 72.7% hypothesis support rate, outperforming both classical causal discovery and LLM-guided baselines. Ablations show that DiscoPER scales with more data, and confirms the benefits of second-order meta-reflection.

Modern materials science has historically been founded on combining restricted subsets of the periodic table, favoring high-purity, few-element systems. However, the demands of an emerging circular economy, together with the need to understand materials behavior under planetary and industrial extremes, increasingly require mastering Mendeleev materials - chemically and structurally complex systems that span large portions of the periodic table. In these regimes, current universal machine-learning interatomic potentials often fail, largely due to systematic gaps in traditional training datasets that heavily emphasize low-energy, near-equilibrium structures. We address this limitation by introducing a chemistry-agnostic, information-entropy-maximization protocol for data generation. By decoupling structural sampling from thermodynamic bias, our approach provides a robust physical prior for atomic interactions across the entire periodic table, including regimes far from equilibrium and under extreme conditions. Training a Graph Atomic Cluster Expansion (GRACE) model on the resulting statistically maximized entropy (SMAX) dataset yields markedly improved robustness across a range of stringent benchmarks. These include large-strain phase transformations in tin, defect evolution in tungsten-based alloys, and catalytic reaction barrier prediction. More broadly, our approach establishes a scalable and principled methodology for navigating the vast chemical and configurational space relevant to future materials design. It enables a paradigm of discovery by simulation in which unbiased sampling protocols autonomously resolve emergent structures in multi-elemental mixtures-such as systems containing the nine most abundant elements in the Earth's crust-without reliance on a priori chemical assumptions.

Many environmental remediation and energy applications (conversion and storage) for sustainability need design and development of green novel materials. Discovery processes of such novel materials are time taking and cumbersome due to large number of possible combinations and permutations of materials structures. Often theoretical studies based on Density Functional Theory (DFT) and other theories, coupled with Simulations are conducted to narrow down sample space of candidate materials, before conducting laboratory-based synthesis and analytical process. With the emergence of artificial intelligence (AI), AI techniques are being tried in this process too to ease out simulation time and cost. However tremendous values of previously published research from various parts of the world are still left as labor-intensive manual effort and discretion of individual researcher and prone to human omissions. AIMS-EREA is our novel framework to blend best of breed of Material Science theory with power of Generative AI to give best impact and smooth and quickest discovery of material for sustainability. This also helps to eliminate the possibility of production of hazardous residues and bye-products of the reactions. AIMS-EREA uses all available resources -- Predictive and Analytical AI on large collection of chemical databases along with automated intelligent assimilation of deep materials knowledge from previously published research works through Generative AI. We demonstrate use of our own novel framework with an example, how this framework can be successfully applied to achieve desired success in development of thermoelectric material for waste heat conversion.

The discovery of novel materials is critical for global energy and quantum technology transitions. While deep learning has fundamentally reshaped this landscape, existing predictive or generative models typically operate in isolation, lacking the autonomous orchestration required to execute the full discovery process. Here we present ElementsClaw, an agentic framework for materials discovery that synergizes Large Atomic Models (LAMs) with Large Language Models (LLMs). In response to varied human queries, ElementsClaw orchestrates a suite of LAM tools finetuned from our proposed 1-billion-parameter model Elements for atomic-scale numerical computation, while leveraging LLMs for high-level semantic reasoning. This shift moves AI-driven materials science from isolated processes toward integrated and human interactive discovery. Applied to superconductors, ElementsClaw screens 2.4 million crystals in just 28 GPU hours to identify 68,000 high-confidence candidates (The complete dataset of screened superconductors is available at https://developer.damo-academy.com/material), expanding known superconducting space by orders of magnitude compared to datasets curated over decades. Critically, ElementsClaw achieves a high success rate in identifying superconductors hidden in literature and discovers four novel experimentally verified superconductors, exemplified by Zr3ScRe8 with a transition temperature of 6.8 K and HfZrRe4 at 6.7 K. Together, our results establish a knowledge integrated, autonomously orchestrated, and experimentally grounded paradigm for materials discovery.

Designing de novo proteins beyond those found in nature holds significant promise for advancements in both scientific and engineering applications. Current methodologies for protein design often rely on AI-based models, such as surrogate models that address end-to-end problems by linking protein structure to material properties or vice versa. However, these models frequently focus on specific material objectives or structural properties, limiting their flexibility when incorporating out-of-domain knowledge into the design process or comprehensive data analysis is required. In this study, we introduce ProtAgents, a platform for de novo protein design based on Large Language Models (LLMs), where multiple AI agents with distinct capabilities collaboratively address complex tasks within a dynamic environment. The versatility in agent development allows for expertise in diverse domains, including knowledge retrieval, protein structure analysis, physics-based simulations, and results analysis. The dynamic collaboration between agents, empowered by LLMs, provides a versatile approach to tackling protein design and analysis problems, as demonstrated through diverse examples in this study. The problems of interest encompass designing new proteins, analyzing protein structures and obtaining new first-principles data -- natural vibrational frequencies -- via physics simulations. The concerted effort of the system allows for powerful automated and synergistic design of de novo proteins with targeted mechanical properties. The flexibility in designing the agents, on one hand, and their capacity in autonomous collaboration through the dynamic LLM-based multi-agent environment on the other hand, unleashes great potentials of LLMs in addressing multi-objective materials problems and opens up new avenues for autonomous materials discovery and design.

Large language models are increasingly deployed as autonomous coding agents and have achieved remarkably strong performance on software engineering benchmarks. However, it is unclear whether such success transfers to computational scientific workflows, where tasks require not only strong coding ability, but also the ability to navigate complex, domain-specific procedures and to interpret results in the context of scientific claims. To address this question, we present AutoMat, a benchmark for evaluating LLM-based agents' ability to reproduce claims from computational materials science. AutoMat poses three interrelated challenges: recovering underspecified computational procedures, navigating specialized toolchains, and determining whether the resulting evidence supports a claim. By working closely with subject matter experts, we curate a set of claims from real materials science papers to test whether coding agents can recover and execute the end-to-end workflow needed to support (or undermine) such claims. We then evaluate multiple representative coding agent settings across several foundation models. Our results show that current LLM-based agents obtain low overall success rates on AutoMat, with the best-performing setting achieving a success rate of only 54.1%. Error analysis further reveals that agents perform worst when workflows must be reconstructed from paper text alone and that they fail primarily due to incomplete procedures, methodological deviations, and execution fragility. Taken together, these findings position AutoMat as both a benchmark for computational scientific reproducibility and a tool for diagnosing the current limitations of agentic systems in AI-for-science settings.

Characterizing materials with electron micrographs poses significant challenges for automated labeling due to the complex nature of nanomaterial structures. To address this, we introduce a fully automated, end-to-end pipeline that leverages recent advances in Generative AI. It is designed for analyzing and understanding the microstructures of semiconductor materials with effectiveness comparable to that of human experts, contributing to the pursuit of Artificial General Intelligence (AGI) in nanomaterial identification. Our approach utilizes Large MultiModal Models (LMMs) such as GPT-4V, alongside text-to-image models like DALLE-3. We integrate a GPT-4 guided Visual Question Answering (VQA) method to analyze nanomaterial images, generate synthetic nanomaterial images via DALLE-3, and employ in-context learning with few-shot prompting in GPT-4V for accurate nanomaterial identification. Our method surpasses traditional techniques by enhancing the precision of nanomaterial identification and optimizing the process for high-throughput screening.

In this paper, we present a novel approach to knowledge extraction and retrieval using Natural Language Processing (NLP) techniques for material science. Our goal is to automatically mine structured knowledge from millions of research articles in the field of polycrystalline materials and make it easily accessible to the broader community. The proposed method leverages NLP techniques such as entity recognition and document classification to extract relevant information and build an extensive knowledge base, from a collection of 9.5 Million publications. The resulting knowledge base is integrated into a search engine, which enables users to search for information about specific materials, properties, and experiments with greater precision than traditional search engines like Google. We hope our results can enable material scientists quickly locate desired experimental procedures, compare their differences, and even inspire them to design new experiments. Our website will be available at Github https://github.com/Xianjun-Yang/PcMSP.git soon.

Materials discovery requires navigating vast chemical and structural spaces while satisfying multiple, often conflicting, objectives. We present LLM-guided Evolution for MAterials design (LLEMA), a unified framework that couples the scientific knowledge embedded in large language models with chemistry-informed evolutionary rules and memory-based refinement. At each iteration, an LLM proposes crystallographically specified candidates under explicit property constraints; a surrogate-augmented oracle estimates physicochemical properties; and a multi-objective scorer updates success/failure memories to guide subsequent generations. Evaluated on 14 realistic tasks spanning electronics, energy, coatings, optics, and aerospace, LLEMA discovers candidates that are chemically plausible, thermodynamically stable, and property-aligned, achieving higher hit-rates and stronger Pareto fronts than generative and LLM-only baselines. Ablation studies confirm the importance of rule-guided generation, memory-based refinement, and surrogate prediction. By enforcing synthesizability and multi-objective trade-offs, LLEMA delivers a principled pathway to accelerate practical materials discovery. Code: https://github.com/scientific-discovery/LLEMA

The study of biological materials and bio-inspired materials science is well established; however, surprisingly little knowledge has been systematically translated to engineering solutions. To accelerate discovery and guide insights, an open-source autoregressive transformer large language model (LLM), BioinspiredLLM, is reported. The model was finetuned with a corpus of over a thousand peer-reviewed articles in the field of structural biological and bio-inspired materials and can be prompted to recall information, assist with research tasks, and function as an engine for creativity. The model has proven that it is able to accurately recall information about biological materials and is further enhanced with enhanced reasoning ability, as well as with retrieval-augmented generation to incorporate new data during generation that can also help to traceback sources, update the knowledge base, and connect knowledge domains. BioinspiredLLM also has been shown to develop sound hypotheses regarding biological materials design and remarkably so for materials that have never been explicitly studied before. Lastly, the model showed impressive promise in collaborating with other generative artificial intelligence models in a workflow that can reshape the traditional materials design process. This collaborative generative artificial intelligence method can stimulate and enhance bio-inspired materials design workflows. Biological materials are at a critical intersection of multiple scientific fields and models like BioinspiredLLM help to connect knowledge domains.

Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard

This paper studies the impact of artificial intelligence on innovation, exploiting the randomized introduction of a new materials discovery technology to 1,018 scientists in the R&D lab of a large U.S. firm. AI-assisted researchers discover 44% more materials, resulting in a 39% increase in patent filings and a 17% rise in downstream product innovation. These compounds possess more novel chemical structures and lead to more radical inventions. However, the technology has strikingly disparate effects across the productivity distribution: while the bottom third of scientists see little benefit, the output of top researchers nearly doubles. Investigating the mechanisms behind these results, I show that AI automates 57% of "idea-generation" tasks, reallocating researchers to the new task of evaluating model-produced candidate materials. Top scientists leverage their domain knowledge to prioritize promising AI suggestions, while others waste significant resources testing false positives. Together, these findings demonstrate the potential of AI-augmented research and highlight the complementarity between algorithms and expertise in the innovative process. Survey evidence reveals that these gains come at a cost, however, as 82% of scientists report reduced satisfaction with their work due to decreased creativity and skill underutilization.

Advances in generative artificial intelligence are transforming how metal-organic frameworks (MOFs) are designed and discovered. This Perspective introduces the shift from laborious enumeration of MOF candidates to generative approaches that can autonomously propose and synthesize in the laboratory new porous reticular structures on demand. We outline the progress of employing deep learning models, such as variational autoencoders, diffusion models, and large language model-based agents, that are fueled by the growing amount of available data from the MOF community and suggest novel crystalline materials designs. These generative tools can be combined with high-throughput computational screening and even automated experiments to form accelerated, closed-loop discovery pipelines. The result is a new paradigm for reticular chemistry in which AI algorithms more efficiently direct the search for high-performance MOF materials for clean air and energy applications. Finally, we highlight remaining challenges such as synthetic feasibility, dataset diversity, and the need for further integration of domain knowledge.

We report a case study of four end-to-end attempts to autonomously generate ML research papers using a pipeline of six LLM agents mapped to stages of the scientific workflow. Of these four, three attempts failed during implementation or evaluation. One completed the pipeline and was accepted to Agents4Science 2025, an experimental inaugural venue that required AI systems as first authors, passing both human and multi-AI review. From these attempts, we document six recurring failure modes: bias toward training data defaults, implementation drift under execution pressure, memory and context degradation across long-horizon tasks, overexcitement that declares success despite obvious failures, insufficient domain intelligence, and weak scientific taste in experimental design. We conclude by discussing four design principles for more robust AI-scientist systems, implications for autonomous scientific discovery, and we release all prompts, artifacts, and outputs at https://github.com/Lossfunk/ai-scientist-artefacts-v1

Machine learning-based interatomic potentials and force fields depend critically on accurate atomic structures, yet such data are scarce due to the limited availability of experimentally resolved crystals. Although atomic-resolution electron microscopy offers a potential source of structural data, converting these images into simulation-ready formats remains labor-intensive and error-prone, creating a bottleneck for model training and validation. We introduce AutoMat, an end-to-end, agent-assisted pipeline that automatically transforms scanning transmission electron microscopy (STEM) images into atomic crystal structures and predicts their physical properties. AutoMat combines pattern-adaptive denoising, physics-guided template retrieval, symmetry-aware atomic reconstruction, fast relaxation and property prediction via MatterSim, and coordinated orchestration across all stages. We propose the first dedicated STEM2Mat-Bench for this task and evaluate performance using lattice RMSD, formation energy MAE, and structure-matching success rate. By orchestrating external tool calls, AutoMat enables a text-only LLM to outperform vision-language models in this domain, achieving closed-loop reasoning throughout the pipeline. In large-scale experiments over 450 structure samples, AutoMat substantially outperforms existing multimodal large language models and tools. These results validate both AutoMat and STEM2Mat-Bench, marking a key step toward bridging microscopy and atomistic simulation in materials science.The code and dataset are publicly available at https://github.com/yyt-2378/AutoMat and https://huggingface.co/datasets/yaotianvector/STEM2Mat.

Large language models (LLMs) have demonstrated rapid progress across a wide array of domains. Owing to the very large number of parameters and training data in LLMs, these models inherently encompass an expansive and comprehensive materials knowledge database, far exceeding the capabilities of individual researcher. Nonetheless, devising methods to harness the knowledge embedded within LLMs for the design and discovery of novel materials remains a formidable challenge. We introduce a general approach for addressing materials classification problems, which incorporates LLMs, prompt engineering, and deep learning. Utilizing a dataset of metallic glasses as a case study, our methodology achieved an improvement of up to 463% in prediction accuracy compared to conventional classification models. These findings underscore the potential of leveraging textual knowledge generated by LLMs for materials especially in the common situation where datasets are sparse, thereby promoting innovation in materials discovery and design.

This paper presents the development of a specialized chatbot for materials science, leveraging the Llama-2 language model, and continuing pre-training on the expansive research articles in the materials science domain from the S2ORC dataset. The methodology involves an initial pretraining phase on over one million domain-specific papers, followed by an instruction-tuning process to refine the chatbot's capabilities. The chatbot is designed to assist researchers, educators, and students by providing instant, context-aware responses to queries in the field of materials science. We make the four trained checkpoints (7B, 13B, with or without chat ability) freely available to the research community at https://github.com/Xianjun-Yang/Quokka.

Large language models (LLMs) are rapidly changing how researchers in materials science and chemistry discover, organize, and act on scientific knowledge. This paper analyzes a broad set of community-developed LLM applications in an effort to identify emerging patterns in how these systems can be used across the scientific research lifecycle. We organize the projects into two complementary categories: Knowledge Infrastructure, systems that structure, retrieve, synthesize, and validate scientific information; and Action Systems, systems that execute, coordinate, or automate scientific work across computational and experimental environments. The submissions reveal a shift from single-purpose LLM tools toward integrated, multi-agent workflows that combine retrieval, reasoning, tool use, and domain-specific validation. Prominent themes include retrieval-augmented generation as grounding infrastructure, persistent structured knowledge representations, multimodal and multilingual scientific inputs, and early progress toward laboratory-integrated closed-loop systems. Together, these results suggest that LLMs are evolving from general-purpose assistants into composable infrastructure for scientific reasoning and action. This work provides a community snapshot of that transition and a practical taxonomy for understanding emerging LLM-enabled workflows in materials science and chemistry.

We present AutoResearch-RL, a framework in which a reinforcement learning agent conducts open-ended neural architecture and hyperparameter research without human supervision, running perpetually until a termination oracle signals convergence or resource exhaustion. At each step the agent proposes a code modification to a target training script, executes it under a fixed wall clock time budget, observes a scalar reward derived from validation bits-per-byte (val-bpb), and updates its policy via Proximal Policy Optimisation (PPO). The key design insight is the separation of three concerns: (i) a frozen environment (data pipeline, evaluation protocol, and constants) that guarantees fair cross-experiment comparison; (ii) a mutable target file (train.py) that represents the agent's editable state; and (iii) a meta-learner (the RL agent itself) that accumulates a growing trajectory of experiment outcomes and uses them to inform subsequent proposals. We formalise this as a Markov Decision Process, derive convergence guarantees under mild assumptions, and demonstrate empirically on a single GPU nanochat pretraining benchmark that AutoResearch-RL discovers configurations that match or exceed hand-tuned baselines after approximately 300 overnight iterations, with no human in the loop.

Leveraging new data sources is a key step in accelerating the pace of materials design and discovery. To complement the strides in synthesis planning driven by historical, experimental, and computed data, we present an automated method for connecting scientific literature to synthesis insights. Starting from natural language text, we apply word embeddings from language models, which are fed into a named entity recognition model, upon which a conditional variational autoencoder is trained to generate syntheses for arbitrary materials. We show the potential of this technique by predicting precursors for two perovskite materials, using only training data published over a decade prior to their first reported syntheses. We demonstrate that the model learns representations of materials corresponding to synthesis-related properties, and that the model's behavior complements existing thermodynamic knowledge. Finally, we apply the model to perform synthesizability screening for proposed novel perovskite compounds.

Automating AI research differs from general software engineering due to computationally expensive evaluation (e.g., model training) and opaque performance attribution. Current LLM-based agents struggle here, often generating monolithic scripts that ignore execution costs and causal factors. We introduce MARS (Modular Agent with Reflective Search), a framework optimized for autonomous AI research. MARS relies on three pillars: (1) Budget-Aware Planning via cost-constrained Monte Carlo Tree Search (MCTS) to explicitly balance performance with execution expense; (2) Modular Construction, employing a "Design-Decompose-Implement" pipeline to manage complex research repositories; and (3) Comparative Reflective Memory, which addresses credit assignment by analyzing solution differences to distill high-signal insights. MARS achieves state-of-the-art performance among open-source frameworks on MLE-Bench under comparable settings, maintaining competitiveness with the global leaderboard's top methods. Furthermore, the system exhibits qualitative "Aha!" moments, where 63% of all utilized lessons originate from cross-branch transfer, demonstrating that the agent effectively generalizes insights across search paths.

The paradigm of agentic science requires AI systems to conduct robust reasoning and engage in long-horizon, autonomous exploration. However, current scientific benchmarks remain confined to domain knowledge comprehension and complex reasoning, failing to evaluate the exploratory nature and procedural complexity of real-world research. In this work, we present research-oriented evaluations in theoretical and computational physics, a natural testbed with comprehensive domain knowledge, complex reasoning, and verifiable end-to-end workflows without reliance on experiments. Here we introduce PRL-Bench (Physics Research by LLMs), a benchmark designed to systematically map the capability boundaries of LLMs in executing end-to-end physics research. Constructed from 100 curated papers from the latest issues of Physical Review Letters since August 2025 and validated by domain experts, PRL-Bench covers five major theory- and computation-intensive subfields of modern physics: astrophysics, condensed matter physics, high-energy physics, quantum information, and statistical physics. Each task in the benchmark is designed to replicate the core properties of authentic scientific research, including exploration-oriented formulation, long-horizon workflows, and objective verifiability, thereby reconstructing the essential reasoning processes and research workflows of real physics research. Evaluation across frontier models shows that performance remains limited, with the best overall score below 50, revealing a pronounced gap between current LLM capabilities and the demands of real scientific research. PRL-Bench serves a reliable testbed for accessing next generation AI scientists advancing AI systems toward autonomous scientific discovery.

One of the main goals and challenges of materials discovery is to find the best candidates for each interest property or application. Machine learning rises in this context to efficiently optimize this search, exploring the immense materials space, consisting of simultaneously the atomic, compositional, and structural spaces. Topological insulators, presenting symmetry-protected metallic edge states, are a promising class of materials for different applications. However, further, development is limited by the scarcity of viable candidates. Here we present and discuss machine learning-accelerated strategies for searching the materials space for two-dimensional topological materials. We show the importance of detailed investigations of each machine learning component, leading to different results. Using recently created databases containing thousands of ab initio calculations of 2D materials, we train machine learning models capable of determining the electronic topology of materials, with an accuracy of over 90%. We can then generate and screen thousands of novel materials, efficiently predicting their topological character without the need for a priori structural knowledge. We discover 56 non-trivial materials, of which 17 novel insulating candidates for further investigation, for which we corroborate their topological properties with density functional theory calculations. This strategy is 10times more efficient than the trial-and-error approach while few orders of magnitude faster and is a proof of concept for guiding improved materials discovery search strategies.

AI-assisted research is crossing a threshold: fully automated systems can now generate research papers for as little as $15, while long-horizon agents can execute experiments, draft manuscripts, and simulate critique with minimal human input. Yet this productivity frontier exposes a deeper integrity problem: under scientific pressure, even frontier LLMs still fabricate results, miss hidden errors, and fail to judge novelty reliably. Studying developments through April 2026, we present an end-to-end analysis of AI across the complete research lifecycle, organized into four epistemological phases: Creation (idea generation, literature review, coding & experiments, tables & figures), Writing (paper writing), Validation (peer review, rebuttal & revision), and Dissemination (posters, slides, videos, social media, project pages, and interactive agents). We identify a sharp, stage-dependent boundary between reliable assistance and unreliable autonomy: AI excels at structured, retrieval-grounded, and tool-mediated tasks, but remains fragile for genuinely novel ideas, research-level experiments, and scientific judgment. Generated ideas often degrade after implementation, research code lags far behind pattern-matching benchmarks, and end-to-end autonomous systems have not yet consistently reached major-venue acceptance standards. We further show that greater automation can obscure rather than eliminate failure modes, making human-governed collaboration the most credible deployment paradigm. Finally, we provide a structured taxonomy, benchmark suite, and tool inventory, cross-stage design principles, and a practitioner-oriented playbook, with resources maintained at our project page.

Progress in scientific discovery is rarely the result of a single "Eureka" moment, but is rather the product of hundreds of scientists incrementally working together toward a common goal. While existing agent workflows are capable of producing research autonomously, they do so in isolation, without the ability to continuously improve upon prior research results. To address these challenges, we introduce AgentRxiv-a framework that lets LLM agent laboratories upload and retrieve reports from a shared preprint server in order to collaborate, share insights, and iteratively build on each other's research. We task agent laboratories to develop new reasoning and prompting techniques and find that agents with access to their prior research achieve higher performance improvements compared to agents operating in isolation (11.4% relative improvement over baseline on MATH-500). We find that the best performing strategy generalizes to benchmarks in other domains (improving on average by 3.3%). Multiple agent laboratories sharing research through AgentRxiv are able to work together towards a common goal, progressing more rapidly than isolated laboratories, achieving higher overall accuracy (13.7% relative improvement over baseline on MATH-500). These findings suggest that autonomous agents may play a role in designing future AI systems alongside humans. We hope that AgentRxiv allows agents to collaborate toward research goals and enables researchers to accelerate discovery.

The ability to generate 3D multiphase microstructures on-demand with targeted attributes can greatly accelerate the design of advanced materials. Here, we present a conditional latent diffusion model (LDM) framework that rapidly synthesizes high-fidelity 3D multiphase microstructures tailored to user specifications. Using this approach, we generate diverse two-phase and three-phase microstructures at high resolution (volumes of 128 times 128 times 64 voxels, representing >10^6 voxels each) within seconds, overcoming the scalability and time limitations of traditional simulation-based methods. Key design features, such as desired volume fractions and tortuosities, are incorporated as controllable inputs to guide the generative process, ensuring that the output structures meet prescribed statistical and topological targets. Moreover, the framework predicts corresponding manufacturing (processing) parameters for each generated microstructure, helping to bridge the gap between digital microstructure design and experimental fabrication. While demonstrated on organic photovoltaic (OPV) active-layer morphologies, the flexible architecture of our approach makes it readily adaptable to other material systems and microstructure datasets. By combining computational efficiency, adaptability, and experimental relevance, this framework addresses major limitations of existing methods and offers a powerful tool for accelerated materials discovery.

Autonomous research agents can already run machine learning experiments without human supervision, but many rely on a narrow search strategy: they repeatedly modify one program and keep changes only when they improve the current best result. This can cause them to discard useful partial ideas, alternative promising directions, and insights from failed or incomplete experiments. GEAR, or Genetic AutoResearch, replaces this single-path search with a population-based search over multiple research states. It keeps a set of strong candidate solutions, selects parents based on productivity, novelty, and coverage, and explores new ideas through mutation and crossover. Each research state stores its code changes, reflections, and performance data, allowing future decisions to build on past discoveries. The paper studies three versions of GEAR: one controlled through prompting, one using a fixed programmatic search controller, and one where the controller itself can evolve during the run. Under the same compute budget and environment, all three versions outperform the AutoResearch baseline. More importantly, while the baseline tends to settle into one local optimum, GEAR continues finding improvements over longer runs. Overall, the results suggest that autonomous research agents become more effective when they maintain multiple promising directions and can adapt their search strategy over time.

Since the advent of various pre-trained large language models, extracting structured knowledge from scientific text has experienced a revolutionary change compared with traditional machine learning or natural language processing techniques. Despite these advances, accessible automated tools that allow users to construct, validate, and visualise datasets from scientific literature extraction remain scarce. We therefore developed ComProScanner, an autonomous multi-agent platform that facilitates the extraction, validation, classification, and visualisation of machine-readable chemical compositions and properties, integrated with synthesis data from journal articles for comprehensive database creation. We evaluated our framework using 100 journal articles against 10 different LLMs, including both open-source and proprietary models, to extract highly complex compositions associated with ceramic piezoelectric materials and corresponding piezoelectric strain coefficients (d33), motivated by the lack of a large dataset for such materials. DeepSeek-V3-0324 outperformed all models with a significant overall accuracy of 0.82. This framework provides a simple, user-friendly, readily-usable package for extracting highly complex experimental data buried in the literature to build machine learning or deep learning datasets.

Developing large-scale foundational datasets is a critical milestone in advancing artificial intelligence (AI)-driven scientific innovation. However, unlike AI-mature fields such as natural language processing, materials science, particularly polymer research, has significantly lagged in developing extensive open datasets. This lag is primarily due to the high costs of polymer synthesis and property measurements, along with the vastness and complexity of the chemical space. This study presents PolyOmics, an omics-scale computational database generated through fully automated molecular dynamics simulation pipelines that provide diverse physical properties for over 10^5 polymeric materials. The PolyOmics database is collaboratively developed by approximately 260 researchers from 48 institutions to bridge the gap between academia and industry. Machine learning models pretrained on PolyOmics can be efficiently fine-tuned for a wide range of real-world downstream tasks, even when only limited experimental data are available. Notably, the generalisation capability of these simulation-to-real transfer models improve significantly as the size of the PolyOmics database increases, exhibiting power-law scaling. The emergence of scaling laws supports the "more is better" principle, highlighting the significance of ultralarge-scale computational materials data for improving real-world prediction performance. This unprecedented omics-scale database reveals vast unexplored regions of polymer materials, providing a foundation for AI-driven polymer science.

Molecular science represents an important frontier for LLM-based agents. Unlike general agents that mainly operate over natural language, code, or web environments, molecular LLM agents must perceive, reason about, and act upon chemical objects across symbolic strings, molecular graphs, 3D conformations, spectra, simulations, and wet-lab measurements. Their capabilities depend on chemically faithful molecular perception, an LLM-centered agent framework, domain-specific tool grounding, and computational or experimental feedback, in addition to planning and tool use. This work develops a conceptual framework for molecular LLM agents from two complementary perspectives. First, we introduce an architectural view of molecular-agent design, covering molecular representation and perception, the agent framework, domain-specific toolboxes, and learning and optimization. Second, we propose a scientific autonomy ladder inspired by staged autonomy in engineering systems, categorizing agents into four levels: L1 assistive or fixed workflows, L2 adaptive computational agents, L3 feedback-aware physical experiment agents, and L4 scientific-agenda agents. Together, these two perspectives establish a comprehensive framework for comparing existing molecular LLM agents, identifying missing capabilities and deployment risks, and guiding the design, evaluation, and deployment of future agents in molecular discovery workflows.

We present an agentic, autonomous graph expansion framework that iteratively structures and refines knowledge in situ. Unlike conventional knowledge graph construction methods relying on static extraction or single-pass learning, our approach couples a reasoning-native large language model with a continually updated graph representation. At each step, the system actively generates new concepts and relationships, merges them into a global graph, and formulates subsequent prompts based on its evolving structure. Through this feedback-driven loop, the model organizes information into a scale-free network characterized by hub formation, stable modularity, and bridging nodes that link disparate knowledge clusters. Over hundreds of iterations, new nodes and edges continue to appear without saturating, while centrality measures and shortest path distributions evolve to yield increasingly distributed connectivity. Our analysis reveals emergent patterns, such as the rise of highly connected 'hub' concepts and the shifting influence of 'bridge' nodes, indicating that agentic, self-reinforcing graph construction can yield open-ended, coherent knowledge structures. Applied to materials design problems, we present compositional reasoning experiments by extracting node-specific and synergy-level principles to foster genuinely novel knowledge synthesis, yielding cross-domain ideas that transcend rote summarization and strengthen the framework's potential for open-ended scientific discovery. We discuss other applications in scientific discovery and outline future directions for enhancing scalability and interpretability.

Perovskite solar cells (PSCs) have rapidly emerged as a leading contender in next-generation photovoltaic technologies, owing to their exceptional power conversion efficiencies and advantageous material properties. Despite these advances, challenges such as long-term stability, environmental sustainability, and scalable manufacturing continue to hinder their commercialization. Precursor additive engineering has shown promise in addressing these issues by enhancing both the performance and durability of PSCs. However, the explosive growth of scientific literature and the complex interplay of materials, processes, and device architectures make it increasingly difficult for researchers to efficiently access, organize, and utilize domain knowledge in this rapidly evolving field. To address this gap, we introduce Perovskite-R1, a specialized large language model (LLM) with advanced reasoning capabilities tailored for the discovery and design of PSC precursor additives. By systematically mining and curating 1,232 high-quality scientific publications and integrating a comprehensive library of 33,269 candidate materials, we constructed a domain-specific instruction-tuning dataset using automated question-answer generation and chain-of-thought reasoning. Fine-tuning the QwQ-32B model on this dataset resulted in Perovskite-R1, which can intelligently synthesize literature insights and generate innovative and practical solutions for defect passivation and the selection of precursor additives. Experimental validation of several model-proposed strategies confirms their effectiveness in improving material stability and performance. Our work demonstrates the potential of domain-adapted LLMs in accelerating materials discovery and provides a closed-loop framework for intelligent, data-driven advancements in perovskite photovoltaic research.

Efficient and accurate prediction of material properties is critical for advancing materials design and applications. The rapid-evolution of large language models (LLMs) presents a new opportunity for material property predictions, complementing experimental measurements and multi-scale computational methods. We focus on predicting the elastic constant tensor, as a case study, and develop domain-specific LLMs for predicting elastic constants and for materials discovery. The proposed ElaTBot LLM enables simultaneous prediction of elastic constant tensors, bulk modulus at finite temperatures, and the generation of new materials with targeted properties. Moreover, the capabilities of ElaTBot are further enhanced by integrating with general LLMs (GPT-4o) and Retrieval-Augmented Generation (RAG) for prediction. A specialized variant, ElaTBot-DFT, designed for 0 K elastic constant tensor prediction, reduces the prediction errors by 33.1% compared with domain-specific, material science LLMs (Darwin) trained on the same dataset. This natural language-based approach lowers the barriers to computational materials science and highlights the broader potential of LLMs for material property predictions and inverse design.

Large Language Models (LLMs) are reshaping many aspects of materials science and chemistry research, enabling advances in molecular property prediction, materials design, scientific automation, knowledge extraction, and more. Recent developments demonstrate that the latest class of models are able to integrate structured and unstructured data, assist in hypothesis generation, and streamline research workflows. To explore the frontier of LLM capabilities across the research lifecycle, we review applications of LLMs through 34 total projects developed during the second annual Large Language Model Hackathon for Applications in Materials Science and Chemistry, a global hybrid event. These projects spanned seven key research areas: (1) molecular and material property prediction, (2) molecular and material design, (3) automation and novel interfaces, (4) scientific communication and education, (5) research data management and automation, (6) hypothesis generation and evaluation, and (7) knowledge extraction and reasoning from the scientific literature. Collectively, these applications illustrate how LLMs serve as versatile predictive models, platforms for rapid prototyping of domain-specific tools, and much more. In particular, improvements in both open source and proprietary LLM performance through the addition of reasoning, additional training data, and new techniques have expanded effectiveness, particularly in low-data environments and interdisciplinary research. As LLMs continue to improve, their integration into scientific workflows presents both new opportunities and new challenges, requiring ongoing exploration, continued refinement, and further research to address reliability, interpretability, and reproducibility.

Autonomous agents have long been a prominent research focus in both academic and industry communities. Previous research in this field often focuses on training agents with limited knowledge within isolated environments, which diverges significantly from human learning processes, and thus makes the agents hard to achieve human-like decisions. Recently, through the acquisition of vast amounts of web knowledge, large language models (LLMs) have demonstrated remarkable potential in achieving human-level intelligence. This has sparked an upsurge in studies investigating LLM-based autonomous agents. In this paper, we present a comprehensive survey of these studies, delivering a systematic review of the field of LLM-based autonomous agents from a holistic perspective. More specifically, we first discuss the construction of LLM-based autonomous agents, for which we propose a unified framework that encompasses a majority of the previous work. Then, we present a comprehensive overview of the diverse applications of LLM-based autonomous agents in the fields of social science, natural science, and engineering. Finally, we delve into the evaluation strategies commonly used for LLM-based autonomous agents. Based on the previous studies, we also present several challenges and future directions in this field. To keep track of this field and continuously update our survey, we maintain a repository of relevant references at https://github.com/Paitesanshi/LLM-Agent-Survey.

Agentic systems enable the intelligent use of research tooling, augmenting a researcher's ability to investigate and propose novel solutions to existing problems. Within Additive Manufacturing (AM), alloy discovery remains a complex challenge, often requiring expertise in the various domains of materials science, thermodynamic simulations, and experimental analysis. Large Language Model (LLM) enabled agents can facilitate this endeavor by utilizing their extensive knowledge base to dispatch tool calls via Model Context Protocol (MCP) to perform actions such as Thermo-Calc property diagram calculations and lack of fusion process map generation. In addition, the multi-agent system developed in this work is able to effectively reason through complex user prompts and provide analysis on the printability of proposed alloys. These agents can dynamically adjust their task trajectory to the outcomes of tool call results, effectively enabling autonomous decision-making in practical environments. This work aims to utilize LLM enabled agents to automate and accelerate the task of alloy discovery within the field of additive manufacturing and showcase the benefits of adopting this multi-agent system.

Data-driven materials discovery requires large-scale experimental datasets, yet most of the information remains trapped in unstructured literature. Existing extraction efforts often focus on a limited set of features and have not addressed the integrated composition-processing-microstructure-property relationships essential for understanding materials behavior, thereby posing challenges for building comprehensive databases. To address this gap, we propose a multi-stage information extraction pipeline powered by large language models, which captures 47 features spanning composition, processing, microstructure, and properties exclusively from experimentally reported materials. The pipeline integrates iterative extraction with source tracking to enhance both accuracy and reliability. Evaluations at the feature level (independent attributes) and tuple level (interdependent features) yielded F1 scores around 0.96. Compared with single-pass extraction without source tracking, our approach improved F1 scores of microstructure category by 10.0% (feature level) and 13.7% (tuple level), and reduced missed materials from 49 to 13 out of 396 materials in 100 articles on precipitate-containing multi-principal element alloys (miss rate reduced from 12.4% to 3.3%). The pipeline enables scalable and efficient literature mining, producing databases with high precision, minimal omissions, and zero false positives. These datasets provide trustworthy inputs for machine learning and materials informatics, while the modular design generalizes to diverse material classes, enabling comprehensive materials information extraction.

LLM-based agents have shown increasing potential in automating scientific discovery. Given an optimizable metric and an execution environment, they can propose, validate, and iterate scientific solutions, and have produced results that outperform human-designed approaches. As model capabilities continue to improve, we argue that the bottleneck for autonomous scientific discovery is shifting from prescribing agent workflows to designing agent environments: the resources, constraints, and interfaces that shape agent behavior. We frame this as environment engineering: building environments that amplify productive behaviors, such as open-ended exploration, systematic artifact management, and inter-agent collaboration, while suppressing harmful behaviors, such as reward hacking and high-friction human oversight. We present EurekAgent, an environment-engineered agent system for metric-driven autonomous scientific discovery. EurekAgent engineers the environment along four dimensions: permissions engineering for bounded agent execution and isolated evaluation; artifact engineering for filesystem and Git-based collaboration; budget engineering for budget-aware exploration; and human-in-the-loop engineering for easy human supervision and intervention. EurekAgent sets new state-of-the-art results on multiple mathematics, kernel engineering, and machine learning tasks, including new state-of-the-art 26-circle packing results discovered with less than $11 in total API cost. We open-source our code and results, and call for environment engineering as a core research direction for developing reliable autonomous research agents.

Agentic systems enable the intelligent automation of complex workflows, specific to additive manufacturing this is applicable for complex tasks such as process parameter optimization for mechanical properties. This work investigates the AI enabled agentic process optimization within Selective Laser Sintering (SLS) to iteratively improve the tensile and flexural properties of 3 different materials on the Inova Mk1. These materials include PA12 GF, PA11 Onyx, and PA12 Blend (volume mixture of 25% PA12 GF and 75% PA12 White) and with using knowledge from previous builds and minimal guidance from the user, the agentic system was able to optimize process parameters over a small number of iterations to achieve comparable TDS specified mechanical properties. This work showcases the ability for an agentic system to continually learn from updated data, enabling the intelligent automation of complex tasks such as process parameter optimization for selective laser sintering.

Self-supervised neural language models have recently achieved unprecedented success, from natural language processing to learning the languages of biological sequences and organic molecules. These models have demonstrated superior performance in the generation, structure classification, and functional predictions for proteins and molecules with learned representations. However, most of the masking-based pre-trained language models are not designed for generative design, and their black-box nature makes it difficult to interpret their design logic. Here we propose BLMM Crystal Transformer, a neural network based probabilistic generative model for generative and tinkering design of inorganic materials. Our model is built on the blank filling language model for text generation and has demonstrated unique advantages in learning the "materials grammars" together with high-quality generation, interpretability, and data efficiency. It can generate chemically valid materials compositions with as high as 89.7\% charge neutrality and 84.8\% balanced electronegativity, which are more than 4 and 8 times higher compared to a pseudo random sampling baseline. The probabilistic generation process of BLMM allows it to recommend tinkering operations based on learned materials chemistry and makes it useful for materials doping. Combined with the TCSP crysal structure prediction algorithm, We have applied our model to discover a set of new materials as validated using DFT calculations. Our work thus brings the unsupervised transformer language models based generative artificial intelligence to inorganic materials. A user-friendly web app has been developed for computational materials doping and can be accessed freely at www.materialsatlas.org/blmtinker.

Understanding and interpreting dynamics of functional materials in situ is a grand challenge in physics and materials science due to the difficulty of experimentally probing materials at varied length and time scales. X-ray photon correlation spectroscopy (XPCS) is uniquely well-suited for characterizing materials dynamics over wide-ranging time scales, however spatial and temporal heterogeneity in material behavior can make interpretation of experimental XPCS data difficult. In this work we have developed an unsupervised deep learning (DL) framework for automated classification and interpretation of relaxation dynamics from experimental data without requiring any prior physical knowledge of the system behavior. We demonstrate how this method can be used to rapidly explore large datasets to identify samples of interest, and we apply this approach to directly correlate bulk properties of a model system to microscopic dynamics. Importantly, this DL framework is material and process agnostic, marking a concrete step towards autonomous materials discovery.

Discovering novel materials is critical for technological advancements such as solar cells, batteries, and carbon capture. However, the development of new materials is constrained by a slow and expensive trial-and-error process. To accelerate this pipeline, we introduce PLaID++, a Large Language Model (LLM) fine-tuned for stable and property-guided crystal generation. We fine-tune Qwen-2.5 7B to generate crystal structures using a novel Wyckoff-based text representation. We show that generation can be effectively guided with a reinforcement learning technique based on Direct Preference Optimization (DPO), with sampled structures categorized by their stability, novelty, and space group. By encoding symmetry constraints directly into text and guiding model outputs towards desirable chemical space, PLaID++ generates structures that are thermodynamically stable, unique, and novel at a sim50\% greater rate than prior methods and conditionally generates structures with desired space group properties. Our experiments highlight the effectiveness of iterative DPO, achieving sim115\% and sim50\% improvements in unconditional and space group conditioned generation, respectively, compared to fine-tuning alone. Our work demonstrates the potential of adapting post-training techniques from natural language processing to materials design, paving the way for targeted and efficient discovery of novel materials.

Material and product life cycles are based on complex value chains of technology-specific elements. Resource strategy aspects of essential and strategic raw materials have a direct impact on applications of new functionalized materials or the development of novel products. Thus, an urgent challenge of modern materials science is to obtain information about the supply risk and environmental aspects of resource utilization, especially at an early stage of basic research. Combining the fields of materials science, industrial engineering and resource strategy enables a multidisciplinary research approach to identify specific risks within the value chain, aggregated as the so-called resource criticality. Here, we demonstrate a step-by-step criticality assessment in the sector of basic materials research for multifunctional hexagonal manganite YMnO3, which can be a candidate for future electronic systems. Raw material restrictions can be quantitatively identified, even at such an early stage of materials research, from eleven long-term indicators including our new developed Sector Competition Index. This approach for resource strategy for modern material science integrates two objective targets: reduced supply risk and enhanced environmental sustainability of new functionalized materials, showing drawbacks but also benefits towards a sustainable materials research and development.

Materials discovery and development are critical for addressing global challenges. Yet, the exponential growth in materials science literature comprising vast amounts of textual data has created significant bottlenecks in knowledge extraction, synthesis, and scientific reasoning. Large Language Models (LLMs) offer unprecedented opportunities to accelerate materials research through automated analysis and prediction. Still, their effective deployment requires domain-specific adaptation for understanding and solving domain-relevant tasks. Here, we present LLaMat, a family of foundational models for materials science developed through continued pretraining of LLaMA models on an extensive corpus of materials literature and crystallographic data. Through systematic evaluation, we demonstrate that LLaMat excels in materials-specific NLP and structured information extraction while maintaining general linguistic capabilities. The specialized LLaMat-CIF variant demonstrates unprecedented capabilities in crystal structure generation, predicting stable crystals with high coverage across the periodic table. Intriguingly, despite LLaMA-3's superior performance in comparison to LLaMA-2, we observe that LLaMat-2 demonstrates unexpectedly enhanced domain-specific performance across diverse materials science tasks, including structured information extraction from text and tables, more particularly in crystal structure generation, a potential adaptation rigidity in overtrained LLMs. Altogether, the present work demonstrates the effectiveness of domain adaptation towards developing practically deployable LLM copilots for materials research. Beyond materials science, our findings reveal important considerations for domain adaptation of LLMs, such as model selection, training methodology, and domain-specific performance, which may influence the development of specialized scientific AI systems.

We present Material Anything, a fully-automated, unified diffusion framework designed to generate physically-based materials for 3D objects. Unlike existing methods that rely on complex pipelines or case-specific optimizations, Material Anything offers a robust, end-to-end solution adaptable to objects under diverse lighting conditions. Our approach leverages a pre-trained image diffusion model, enhanced with a triple-head architecture and rendering loss to improve stability and material quality. Additionally, we introduce confidence masks as a dynamic switcher within the diffusion model, enabling it to effectively handle both textured and texture-less objects across varying lighting conditions. By employing a progressive material generation strategy guided by these confidence masks, along with a UV-space material refiner, our method ensures consistent, UV-ready material outputs. Extensive experiments demonstrate our approach outperforms existing methods across a wide range of object categories and lighting conditions.

Large language models (LLMs) have emerged as powerful tools in chemistry, significantly impacting molecule design, property prediction, and synthesis optimization. This review highlights LLM capabilities in these domains and their potential to accelerate scientific discovery through automation. We also review LLM-based autonomous agents: LLMs with a broader set of tools to interact with their surrounding environment. These agents perform diverse tasks such as paper scraping, interfacing with automated laboratories, and synthesis planning. As agents are an emerging topic, we extend the scope of our review of agents beyond chemistry and discuss across any scientific domains. This review covers the recent history, current capabilities, and design of LLMs and autonomous agents, addressing specific challenges, opportunities, and future directions in chemistry. Key challenges include data quality and integration, model interpretability, and the need for standard benchmarks, while future directions point towards more sophisticated multi-modal agents and enhanced collaboration between agents and experimental methods. Due to the quick pace of this field, a repository has been built to keep track of the latest studies: https://github.com/ur-whitelab/LLMs-in-science.

Leveraging generative Artificial Intelligence (AI), we have transformed a dataset comprising 1,000 scientific papers into an ontological knowledge graph. Through an in-depth structural analysis, we have calculated node degrees, identified communities and connectivities, and evaluated clustering coefficients and betweenness centrality of pivotal nodes, uncovering fascinating knowledge architectures. The graph has an inherently scale-free nature, is highly connected, and can be used for graph reasoning by taking advantage of transitive and isomorphic properties that reveal unprecedented interdisciplinary relationships that can be used to answer queries, identify gaps in knowledge, propose never-before-seen material designs, and predict material behaviors. We compute deep node embeddings for combinatorial node similarity ranking for use in a path sampling strategy links dissimilar concepts that have previously not been related. One comparison revealed structural parallels between biological materials and Beethoven's 9th Symphony, highlighting shared patterns of complexity through isomorphic mapping. In another example, the algorithm proposed a hierarchical mycelium-based composite based on integrating path sampling with principles extracted from Kandinsky's 'Composition VII' painting. The resulting material integrates an innovative set of concepts that include a balance of chaos/order, adjustable porosity, mechanical strength, and complex patterned chemical functionalization. We uncover other isomorphisms across science, technology and art, revealing a nuanced ontology of immanence that reveal a context-dependent heterarchical interplay of constituents. Graph-based generative AI achieves a far higher degree of novelty, explorative capacity, and technical detail, than conventional approaches and establishes a widely useful framework for innovation by revealing hidden connections.

Autonomous agents powered by large language models (LLMs) promise to accelerate scientific discovery end-to-end, but rigorously evaluating their capacity for verifiable discovery remains a central challenge. Existing benchmarks face a trade-off: they either heavily rely on LLM-as-judge evaluations of automatically generated research outputs or optimize convenient yet isolated performance metrics that provide coarse proxies for scientific insight. To address this gap, we introduce FIRE-Bench (Full-cycle Insight Rediscovery Evaluation), a benchmark that evaluates agents through the rediscovery of established findings from recent, high-impact machine learning research. Agents are given only a high-level research question extracted from a published, verified study and must autonomously explore ideas, design experiments, implement code, execute their plans, and derive conclusions supported by empirical evidence. We evaluate a range of state-of-the-art agents with frontier LLMs backbones like gpt-5 on FIRE-Bench. Our results show that full-cycle scientific research remains challenging for current agent systems: even the strongest agents achieve limited rediscovery success (<50 F1), exhibit high variance across runs, and display recurring failure modes in experimental design, execution, and evidence-based reasoning. FIRE-Bench provides a rigorous and diagnostic framework for measuring progress toward reliable agent-driven scientific discovery.

Large language models have demonstrated remarkable reasoning capabilities across diverse natural language tasks. However, comparable breakthroughs in scientific discovery are more limited, because understanding complex physical phenomena demands multifaceted representations far beyond language alone. A compelling example is the design of functional materials such as MOFs-critical for a range of impactful applications like carbon capture and hydrogen storage. Navigating their vast and intricate design space in language-based representations interpretable by LLMs is challenging due to the numerous possible three-dimensional atomic arrangements and strict reticular rules of coordination geometry and topology. Despite promising early results in LLM-assisted discovery for simpler materials systems, MOF design remains heavily reliant on tacit human expertise rarely codified in textual information alone. To overcome this barrier, we introduce L2M3OF, the first multimodal LLM for MOFs. L2M3OF integrates crystal representation learning with language understanding to process structural, textual, and knowledge modalities jointly. L2M3OF employs a pre-trained crystal encoder with a lightweight projection layer to compress structural information into a token space, enabling efficient alignment with language instructions. To facilitate training and evaluation, we curate a structure-property-knowledge database of crystalline materials and benchmark L2M3OF against state-of-the-art closed-source LLMs such as GPT-5, Gemini-2.5-Pro and DeepSeek-R1. Experiments show that L2M3OF outperforms leading text-based closed-source LLMs in property prediction and knowledge generation tasks, despite using far fewer parameters. These results highlight the importance of multimodal approaches for porous material understanding and establish L2M3OF as a foundation for next-generation AI systems in materials discovery.

Scientific research is being reshaped by AI systems that move beyond isolated assistance toward longer-horizon workflows spanning literature grounding, hypothesis generation, experimentation, validation, reporting, and revision. This shift marks a transition from task-level AI for science to workflow-level research automation. Yet current systems remain fragmented, differing in autonomy, domain scope, execution environment, validation mechanism, and human oversight, while still struggling with evidence preservation, reproducibility, weak-direction rejection, provenance tracking, cross-domain robustness, and accountable scientific closure. This survey examines these developments through AutoResearch, defined as the developmental spectrum of AI-powered scientific workflow automation. Within it, Vibe Research denotes the human-steered region of prompt-based assistance and human-verified execution, whereas emerging AI-led systems coordinate larger portions of the discovery loop without achieving robust autonomy. We analyze how research systems redistribute control, evidence, execution, validation, and accountability across workflows and organize the field around five workflow conditions: literature and research grounding; hypothesis formation and planning; experimentation and tool use; feedback, validation, and review; and reporting and knowledge communication. We further synthesize AI scientist systems, mixed-initiative co-research frameworks, benchmarks, domain deployments, and open-source infrastructures. Finally, we propose five evaluation dimensions--novelty, validity, impact, reliability, and provenance--and show that AutoResearch autonomy is domain-conditioned, being more credible in structured, executable, and rapidly verifiable settings but limited in embodied, delayed, heterogeneous, ethical, or institutionally accountable contexts.

The automation of scientific discovery represents a critical milestone in Artificial Intelligence (AI) research. However, existing agentic systems for science suffer from two fundamental limitations: rigid, pre-programmed workflows that cannot adapt to intermediate findings, and inadequate context management that hinders long-horizon research. We present freephdlabor, an open-source multiagent framework featuring fully dynamic workflows determined by real-time agent reasoning and a \textit{modular architecture} enabling seamless customization -- users can modify, add, or remove agents to address domain-specific requirements. The framework provides comprehensive infrastructure including automatic context compaction, workspace-based communication to prevent information degradation, memory persistence across sessions, and non-blocking human intervention mechanisms. These features collectively transform automated research from isolated, single-run attempts into continual research programs that build systematically on prior explorations and incorporate human feedback. By providing both the architectural principles and practical implementation for building customizable co-scientist systems, this work aims to facilitate broader adoption of automated research across scientific domains, enabling practitioners to deploy interactive multiagent systems that autonomously conduct end-to-end research -- from ideation through experimentation to publication-ready manuscripts.

The most widely used method for obtaining high-quality two-dimensional materials is through mechanical exfoliation of bulk crystals. Manual identification of suitable flakes from the resulting random distribution of crystal thicknesses and sizes on a substrate is a time-consuming, tedious task. Here, we present a platform for fully automated scanning, detection, and classification of two-dimensional materials, the source code of which we make openly available. Our platform is designed to be accurate, reliable, fast, and versatile in integrating new materials, making it suitable for everyday laboratory work. The implementation allows fully automated scanning and analysis of wafers with an average inference time of 100 ms for images of 2.3 Mpixels. The developed detection algorithm is based on a combination of the flakes' optical contrast toward the substrate and their geometric shape. We demonstrate that it is able to detect the majority of exfoliated flakes of various materials, with an average recall (AR50) between 67% and 89%. We also show that the algorithm can be trained with as few as five flakes of a given material, which we demonstrate for the examples of few-layer graphene, WSe_2, MoSe_2, CrI_3, 1T-TaS_2 and hexagonal BN. Our platform has been tested over a two-year period, during which more than 10^6 images of multiple different materials were acquired by over 30 individual researchers.

Data-driven science is heralded as a new paradigm in materials science. In this field, data is the new resource, and knowledge is extracted from materials data sets that are too big or complex for traditional human reasoning - typically with the intent to discover new or improved materials or materials phenomena. Multiple factors, including the open science movement, national funding, and progress in information technology, have fueled its development. Such related tools as materials databases, machine learning, and high-throughput methods are now established as parts of the materials research toolset. However, there are a variety of challenges that impede progress in data-driven materials science: data veracity, integration of experimental and computational data, data longevity, standardization, and the gap between industrial interests and academic efforts. In this perspective article, we discuss the historical development and current state of data-driven materials science, building from the early evolution of open science to the rapid expansion of materials data infrastructures. We also review key successes and challenges so far, providing a perspective on the future development of the field.

Synthesis procedures play a critical role in materials research, as they directly affect material properties. With data-driven approaches increasingly accelerating materials discovery, there is growing interest in extracting synthesis procedures from scientific literature as structured data. However, existing studies often rely on rigid, domain-specific schemas with predefined fields for structuring synthesis procedures or assume that synthesis procedures are linear sequences of operations, which limits their ability to capture the structural complexity of real-world procedures. To address these limitations, we adopt PROV-DM, an international standard for provenance information, which supports flexible, graph-based modeling of procedures. We present MatPROV, a dataset of PROV-DM-compliant synthesis procedures extracted from scientific literature using large language models. MatPROV captures structural complexities and causal relationships among materials, operations, and conditions through visually intuitive directed graphs. This representation enables machine-interpretable synthesis knowledge, opening opportunities for future research such as automated synthesis planning and optimization.

Biological systems possess remarkable capabilities for self-recognition and morphological regeneration, often relying solely on local interactions. Inspired by these decentralized processes, we present a novel system of physical 3D bricks--simple cubic units equipped with local communication, processing, and sensing--that are capable of inferring their global shape class and detecting structural damage. Leveraging Neural Cellular Automata (NCA), a learned, fully-distributed algorithm, our system enables each module to independently execute the same neural network without access to any global state or positioning information. We demonstrate the ability of collections of hundreds of these cellular bricks to accurately classify a variety of 3D shapes through purely local interactions. The approach shows strong robustness to out-of-distribution shape variations and high tolerance to communication faults and failed modules. In addition to shape inference, the same decentralized framework is extended to detect missing or damaged components, allowing the collective to localize structural disruptions and to guide a recovery process. This work provides a physical realization of large-scale, decentralized self-recognition and damage detection, advancing the potential of robust, adaptive, and bio-inspired modular systems. Videos and code will be made available at: https://cellularbricks.github.io/

Autonomous research systems are often evaluated as one-shot paper generators: given a topic, they produce a manuscript and a small set of experiment logs. This framing hides the operational problem that makes such systems difficult to trust: research is long-running, branching, failure-prone, and dependent on auditable handoffs between agents and humans. XScientist is a git-like research protocol and operating system for this setting. It orchestrates idea generation, experiment execution, manuscript drafting, self-review, repair, quality gating, daemon scheduling, and reproducibility artifacts as one continuously observable pipeline. The central design choice is to treat each run as a portable research artifact rather than only as a PDF. XScientist exports an Agent-Native Research Artifact (ARA), a protocol that records an exploration DAG, per-node code and outputs, claim-to-evidence anchors, content hashes, provenance, and re-execution hooks. This makes each generated paper inspectable as a science exploration tree: failed branches, repaired experiments, ablations, and manuscript claims remain connected to the nodes that produced them. The system also includes deterministic integrity forensics, sample gates, truth contracts, reviewer-oriented repair loops, and long-running daemon controls. This paper describes the current XScientist architecture, the ARA protocol surface, and the practical safeguards needed to move autonomous science from single-run demos toward reproducible, reviewable, and forkable research infrastructure. The implementation and manuscript source are maintained in the public GitHub repository at https://github.com/smileformylove/XScientist.

Autonomous AI research has advanced rapidly, but long-horizon ML research engineering remains difficult: agents must sustain coherent progress across task comprehension, environment setup, implementation, experimentation, and debugging over hours or days. We introduce AiScientist, a system for autonomous long-horizon engineering for ML research built on a simple principle: strong long-horizon performance requires both structured orchestration and durable state continuity. To this end, AiScientist combines hierarchical orchestration with a permission-scoped File-as-Bus workspace: a top-level Orchestrator maintains stage-level control through concise summaries and a workspace map, while specialized agents repeatedly re-ground on durable artifacts such as analyses, plans, code, and experimental evidence rather than relying primarily on conversational handoffs, yielding thin control over thick state. Across two complementary benchmarks, AiScientist improves PaperBench score by 10.54 points on average over the best matched baseline and achieves 81.82 Any Medal% on MLE-Bench Lite. Ablation studies further show that File-as-Bus protocol is a key driver of performance, reducing PaperBench by 6.41 points and MLE-Bench Lite by 31.82 points when removed. These results suggest that long-horizon ML research engineering is a systems problem of coordinating specialized work over durable project state, rather than a purely local reasoning problem.

The exploration of thermoelectric materials is challenging considering the large materials space, combined with added exponential degrees of freedom coming from doping and the diversity of synthetic pathways. Here we seek to incorporate historical data and update and refine it using experimental feedback by employing error-correction learning (ECL). We thus learn from prior datasets and then adapt the model to differences in synthesis and characterization that are otherwise difficult to parameterize. We then apply this strategy to discovering thermoelectric materials where we prioritize synthesis at temperatures < 300{\deg}C. We document a previously unreported chemical family of thermoelectric materials, PbSe:SnSb, finding that the best candidate in this chemical family, 2 wt% SnSb doped PbSe, exhibits a power factor more than 2x that of PbSe. Our investigations show that our closed-loop experimentation strategy reduces the required number of experiments to find an optimized material by as much as 3x compared to high-throughput searches powered by state-of-the-art machine learning models. We also observe that this improvement is dependent on the accuracy of prior in a manner that exhibits diminishing returns, and after a certain accuracy is reached, it is factors associated with experimental pathways that dictate the trends.

Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials.

The advancement of artificial intelligence toward agentic science is currently bottlenecked by the challenge of ultra-long-horizon autonomy, the ability to sustain strategic coherence and iterative correction over experimental cycles spanning days or weeks. While Large Language Models (LLMs) have demonstrated prowess in short-horizon reasoning, they are easily overwhelmed by execution details in the high-dimensional, delayed-feedback environments of real-world research, failing to consolidate sparse feedback into coherent long-term guidance. Here, we present ML-Master 2.0, an autonomous agent that masters ultra-long-horizon machine learning engineering (MLE) which is a representative microcosm of scientific discovery. By reframing context management as a process of cognitive accumulation, our approach introduces Hierarchical Cognitive Caching (HCC), a multi-tiered architecture inspired by computer systems that enables the structural differentiation of experience over time. By dynamically distilling transient execution traces into stable knowledge and cross-task wisdom, HCC allows agents to decouple immediate execution from long-term experimental strategy, effectively overcoming the scaling limits of static context windows. In evaluations on OpenAI's MLE-Bench under 24-hour budgets, ML-Master 2.0 achieves a state-of-the-art medal rate of 56.44%. Our findings demonstrate that ultra-long-horizon autonomy provides a scalable blueprint for AI capable of autonomous exploration beyond human-precedent complexities.

AI is increasingly playing a pivotal role in transforming how scientific discoveries are made. We introduce The AI Scientist-v2, an end-to-end agentic system capable of producing the first entirely AI generated peer-review-accepted workshop paper. This system iteratively formulates scientific hypotheses, designs and executes experiments, analyzes and visualizes data, and autonomously authors scientific manuscripts. Compared to its predecessor (v1, Lu et al., 2024 arXiv:2408.06292), The AI Scientist-v2 eliminates the reliance on human-authored code templates, generalizes effectively across diverse machine learning domains, and leverages a novel progressive agentic tree-search methodology managed by a dedicated experiment manager agent. Additionally, we enhance the AI reviewer component by integrating a Vision-Language Model (VLM) feedback loop for iterative refinement of content and aesthetics of the figures. We evaluated The AI Scientist-v2 by submitting three fully autonomous manuscripts to a peer-reviewed ICLR workshop. Notably, one manuscript achieved high enough scores to exceed the average human acceptance threshold, marking the first instance of a fully AI-generated paper successfully navigating a peer review. This accomplishment highlights the growing capability of AI in conducting all aspects of scientific research. We anticipate that further advancements in autonomous scientific discovery technologies will profoundly impact human knowledge generation, enabling unprecedented scalability in research productivity and significantly accelerating scientific breakthroughs, greatly benefiting society at large. We have open-sourced the code at https://github.com/SakanaAI/AI-Scientist-v2 to foster the future development of this transformative technology. We also discuss the role of AI in science, including AI safety.

Autonomous systems that generate scientific hypotheses, conduct experiments, and draft manuscripts have recently emerged as a promising paradigm for accelerating discovery. However, existing AI Scientists remain largely domain-agnostic, limiting their applicability to clinical medicine, where research is required to be grounded in medical evidence with specialized data modalities. In this work, we introduce Medical AI Scientist, the first autonomous research framework tailored to clinical autonomous research. It enables clinically grounded ideation by transforming extensively surveyed literature into actionable evidence through clinician-engineer co-reasoning mechanism, which improves the traceability of generated research ideas. It further facilitates evidence-grounded manuscript drafting guided by structured medical compositional conventions and ethical policies. The framework operates under 3 research modes, namely paper-based reproduction, literature-inspired innovation, and task-driven exploration, each corresponding to a distinct level of automated scientific inquiry with progressively increasing autonomy. Comprehensive evaluations by both large language models and human experts demonstrate that the ideas generated by the Medical AI Scientist are of substantially higher quality than those produced by commercial LLMs across 171 cases, 19 clinical tasks, and 6 data modalities. Meanwhile, our system achieves strong alignment between the proposed method and its implementation, while also demonstrating significantly higher success rates in executable experiments. Double-blind evaluations by human experts and the Stanford Agentic Reviewer suggest that the generated manuscripts approach MICCAI-level quality, while consistently surpassing those from ISBI and BIBM. The proposed Medical AI Scientist highlights the potential of leveraging AI for autonomous scientific discovery in healthcare.

The design of functional materials with desired properties is essential in driving technological advances in areas like energy storage, catalysis, and carbon capture. Generative models provide a new paradigm for materials design by directly generating entirely novel materials given desired property constraints. Despite recent progress, current generative models have low success rate in proposing stable crystals, or can only satisfy a very limited set of property constraints. Here, we present MatterGen, a model that generates stable, diverse inorganic materials across the periodic table and can further be fine-tuned to steer the generation towards a broad range of property constraints. To enable this, we introduce a new diffusion-based generative process that produces crystalline structures by gradually refining atom types, coordinates, and the periodic lattice. We further introduce adapter modules to enable fine-tuning towards any given property constraints with a labeled dataset. Compared to prior generative models, structures produced by MatterGen are more than twice as likely to be novel and stable, and more than 15 times closer to the local energy minimum. After fine-tuning, MatterGen successfully generates stable, novel materials with desired chemistry, symmetry, as well as mechanical, electronic and magnetic properties. Finally, we demonstrate multi-property materials design capabilities by proposing structures that have both high magnetic density and a chemical composition with low supply-chain risk. We believe that the quality of generated materials and the breadth of MatterGen's capabilities represent a major advancement towards creating a universal generative model for materials design.

The discovery of novel mechanical metamaterials, whose properties are dominated by their engineered structures rather than chemical composition, is a knowledge-intensive and resource-demanding process. To accelerate the design of novel metamaterials, we present MetaScientist, a human-in-the-loop system that integrates advanced AI capabilities with expert oversight with two primary phases: (1) hypothesis generation, where the system performs complex reasoning to generate novel and scientifically sound hypotheses, supported with domain-specific foundation models and inductive biases retrieved from existing literature; (2) 3D structure synthesis, where a 3D structure is synthesized with a novel 3D diffusion model based on the textual hypothesis and refined it with a LLM-based refinement model to achieve better structure properties. At each phase, domain experts iteratively validate the system outputs, and provide feedback and supplementary materials to ensure the alignment of the outputs with scientific principles and human preferences. Through extensive evaluation from human scientists, MetaScientist is able to deliver novel and valid mechanical metamaterial designs that have the potential to be highly impactful in the metamaterial field.

Large language models (LLMs) such as generative pretrained transformers (GPTs) have shown potential for various commercial applications, but their applicability for materials design remains underexplored. In this article, we introduce AtomGPT, a model specifically developed for materials design based on transformer architectures, to demonstrate the capability for both atomistic property prediction and structure generation. We show that a combination of chemical and structural text descriptions can efficiently predict material properties with accuracy comparable to graph neural network models, including formation energies, electronic bandgaps from two different methods and superconducting transition temperatures. Furthermore, we demonstrate that AtomGPT can generate atomic structures for tasks such as designing new superconductors, with the predictions validated through density functional theory calculations. This work paves the way for leveraging LLMs in forward and inverse materials design, offering an efficient approach to the discovery and optimization of materials.

Recently, large language models (LLMs) have achieved remarkable breakthroughs in general domains such as programming and writing, and have demonstrated strong potential in various scientific research scenarios. However, the capabilities of AI models in the highly specialized field of materials characterization and analysis have not yet been systematically or sufficiently validated. To address this gap, we present MatQnA, the first multi-modal benchmark dataset specifically designed for material characterization techniques. MatQnA includes ten mainstream characterization methods, such as X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), etc. We employ a hybrid approach combining LLMs with human-in-the-loop validation to construct high-quality question-answer pairs, integrating both multiple-choice and subjective questions. Our preliminary evaluation results show that the most advanced multi-modal AI models (e.g., GPT-4.1, Claude 4, Gemini 2.5, and Doubao Vision Pro 32K) have already achieved nearly 90% accuracy on objective questions in materials data interpretation and analysis tasks, demonstrating strong potential for applications in materials characterization and analysis. The MatQnA dataset is publicly available at https://huggingface.co/datasets/richardhzgg/matQnA.

Equipping large language models (LLMs) with complex, interleaved reasoning and tool-use capabilities has become a key focus in agentic AI research, especially with recent advances in reasoning-oriented (``thinking'') models. Such capabilities are key to unlocking a number of important applications. One such application is Deep Research (DR), which requires extensive search and reasoning over many sources. Our work in this paper focuses on the development of native Autonomous Single-Agent models for DR featuring minimal web crawling and Python tool integration. Unlike multi-agent systems, where agents take up pre-defined roles and are told what to do at each step in a static workflow, an autonomous single-agent determines its next action dynamically based on context, without manual directive. While prior work has proposed training recipes for base or instruction-tuned LLMs, we focus on continual reinforcement learning (RL) of reasoning-optimized models to further enhance agentic skills while preserving reasoning ability. Towards this end, we propose a simple RL recipe with entirely synthetic data, which we apply to various open-source LLMs. Our best variant SFR-DR-20B achieves up to 28.7% on Humanity's Last Exam benchmark. In addition, we conduct key analysis experiments to provide more insights into our methodologies.

Machine learning research, crucial for technological advancements and innovation, often faces significant challenges due to its inherent complexity, slow pace of experimentation, and the necessity for specialized expertise. Motivated by this, we present a new systematic framework, autonomous Machine Learning Research with large language models (MLR-Copilot), designed to enhance machine learning research productivity through the automatic generation and implementation of research ideas using Large Language Model (LLM) agents. The framework consists of three phases: research idea generation, experiment implementation, and implementation execution. First, existing research papers are used to generate hypotheses and experimental plans vis IdeaAgent powered by LLMs. Next, the implementation generation phase translates these plans into executables with ExperimentAgent. This phase leverages retrieved prototype code and optionally retrieves candidate models and data. Finally, the execution phase, also managed by ExperimentAgent, involves running experiments with mechanisms for human feedback and iterative debugging to enhance the likelihood of achieving executable research outcomes. We evaluate our framework on five machine learning research tasks and the experimental results show the framework's potential to facilitate the research progress and innovations.

Material discovery is a critical area of research with the potential to revolutionize various fields, including carbon capture, renewable energy, and electronics. However, the immense scale of the chemical space makes it challenging to explore all possible materials experimentally. In this paper, we introduce FlowLLM, a novel generative model that combines large language models (LLMs) and Riemannian flow matching (RFM) to design novel crystalline materials. FlowLLM first fine-tunes an LLM to learn an effective base distribution of meta-stable crystals in a text representation. After converting to a graph representation, the RFM model takes samples from the LLM and iteratively refines the coordinates and lattice parameters. Our approach significantly outperforms state-of-the-art methods, increasing the generation rate of stable materials by over three times and increasing the rate for stable, unique, and novel crystals by sim50% - a huge improvement on a difficult problem. Additionally, the crystals generated by FlowLLM are much closer to their relaxed state when compared with another leading model, significantly reducing post-hoc computational cost.