Daily Papers

Zero-shot visual anomaly detection has achieved remarkable progress, with recent vision-only approaches further improving performance while simplifying the inference pipeline. However, existing methods typically perform dense computation over all images and spatial tokens, despite the fact that normal samples dominate real-world scenarios and anomalies usually occupy only small regions. Token pruning offers a promising solution, but introduces an asymmetric pruning risk in anomaly detection: retaining normal tokens mainly incurs redundant computation, whereas removing anomalous tokens may eliminate the only evidence for detection and localization. This risk is particularly severe in early layers, where pruning provides the greatest computational benefit but anomaly semantics remain unreliable. We propose KeepAD, a defect-preserving token pruning framework that formulates token selection as high-recall, anomaly-aware routing. In shallow layers, KeepAD combines coverage-preserving selection over local 2times2 patch neighborhoods with deterministic anomaly rescue to reduce the risk of discarding subtle defects. In deeper layers, frozen normal and abnormal prototypes guide pruning under an image-adaptive token budget, aggressively removing low-risk normal tokens while preserving local anomaly evidence. Dense-to-sparse self-distillation further supervises early token routing without introducing additional inference overhead. Experiments on six industrial and seven medical zero-shot anomaly detection benchmarks show that KeepAD reduces the token retention ratio to below 20%, while limiting the average degradation in image-level and pixel-level AUROC to within 2.7 percentage points. At the most aggressive operating point, KeepAD achieves a 7.9times speedup over the strongest CLIP-based baseline.

Creative image editing tools, such as Photoshop's Remove or Generative Fill buttons, are central to everyday customer use and account for a major share of traffic in Photoshop and Lightroom. However, current generative AI models face significant latency challenges, which become even more pronounced when transitioning from convolution-based U-Nets to Diffusion Transformers (DiTs). In our evaluation on hundreds of representative image editing samples spanning a wide range of mask ratios, the DiT module alone accounts for an average of 73% of the total model latency, even after being distilled from 50 timesteps down to 8 timesteps. To tackle this challenge, we propose HiLo-Token, an input-adaptive token compression framework that allocates more token budget to high-frequency, rich-context regions while assigning fewer tokens to low-frequency areas. Specifically, for the editing region specified by the user mask, we retain all tokens within a dilated mask to preserve strong locality and contextual relevance. Outside the editing region, we introduce a simple yet effective high-frequency token selection strategy based on spatial frequency to capture important local details, while using tokens from a 16x downsampled image to represent low-frequency components and preserve the blurry but global structure. Extensive experiments on production-level evaluation data validate the effectiveness of the proposed method, achieving 3.13x, 2.59x, and 1.67x DiT speedups on A100-80GB for image editing tasks across small, medium, and large mask ratio categories with average ratios of 6.38%, 15.92%, and 35.36%, respectively, without any regression in generation quality.

Multimodal large language models (MLLMs) read images through visual tokens, and under the small per-image budgets that efficient deployment requires, the fine text of documents, charts and infographics becomes illegible. Zooming in recovers the evidence, but the region must be chosen before the model answers. We find that MLLMs know where the evidence is, but not in a form that can be read before they answer: the answer tokens localize it from the middle layers on, whereas the attention available before answering does so only in the top layers, at a depth that varies across models, and diffusely. Supervising the pre-answer attention to point degrades reading, and the benefit of zooming is governed by each image's information gap. Building on these findings, we introduce ours, which lets an MLLM look where its answer would. A dedicated look token, processed in a single prefill and kept out of the answering pass, learns in hindsight to attend as the model's own correct answers do, extracting this knowledge into a concentrated pointer before any answer exists. Its hidden state then selects how to look, from no zoom to crops, square windows, windows that adapt to the pointer and foveated warps, supervised by the counterfactual outcome of every view. ours needs no box annotations, per-model layer search, external localizers or generation before the answer. On Qwen3-VL at three scales and five text-rich benchmarks, it surpasses the strongest baseline by 4.8-9.1 points at 98 visual tokens per view and attention-guided zooming by 11.1-17.0 points, while running faster than attention-guided and grounding-based zooming.

Vision-language models commonly project all tokens produced by a pretrained vision encoder into a large language model. However, final-layer features can discard text, local attributes, and spatial relationships, while high-resolution inputs substantially increase context length and inference latency. We introduce \method, a Multi-scale Adaptive Vision Encoder. \method uses position-dependent gates to fuse shallow, intermediate, and deep features from a vision Transformer, preserving global semantics while enhancing edges, text, and local structure. It then performs question-conditioned token routing according to question relevance, local information content, global semantics, and spatial coverage, with a token budget that adapts to image complexity. To mitigate compression loss, we further introduce full-to-compressed representation distillation and a spatial diversity regularizer. In an illustrative simulation under a unified 7B language-model framework, \method reduces the average number of SigLIP-SO400M visual tokens from 729 to 146 (approximately 80.0\%) and improves the mean score on VQAv2, GQA, TextVQA, ScienceQA-IMG, and MMBench by 2.2 percentage points, while reducing single-image time to first token from 228\,ms to 129\,ms. We provide the full model design and evaluation protocol. All reported numbers currently serve only as placeholders for paper organization and experimental design; formal claims require real training runs, independent replications, and official benchmark evaluation.

Efficient visual tokenization requires balancing representation compactness with the preservation of fine-grained image content. Conventional grid-based tokenizers allocate tokens uniformly across spatial locations despite non-uniform visual complexity, whereas compact 1D tokenizers aggregate global information but can struggle to preserve local details. We introduce MixTok, a hybrid visual tokenizer that combines a compact 1D global representation with sparse 2D tokens for local refinement. A content-adaptive router ranks candidate locations by refinement priority and determines the number of 2D tokens for each image under a target average token budget. At the highest-scoring locations, 2D token features replace the spatial features recovered from the 1D representation, and a shared decoder reconstructs the image from the resulting mixed features. On ImageNet 256 x 256, MixTok achieves highly competitive reconstruction and generation performance, with an rFID of 1.195 and a gFID of 1.95 at respective average budgets of approximately 128 and 131 content tokens per image.

Most image generation models rely on uniform tokenization, allocating the exact same computational budget to equally-sized image patches. This static paradigm cannot adapt to different resource constraints at inference time, and yields suboptimal quality-cost tradeoff by devoting the same effort to both plain backgrounds and intricate details. We propose BudgetPix, an adaptive tokenization framework that dynamically allocates compute based on visual complexity and spatial layout, enabling flexible computational budgeting at inference time. BudgetPix comprises three key components: (1) an adaptive encoder that maps a fixed-size image to a variable-length token sequence using an entropy-guided quadtree alongside a multi-scale patch embedder; (2) a scale-aware decoder reconstructs fixed-resolution images from multi-scale token sets; and (3) a flexible training and sampling schedule that enables pixel-space denoisers to operate across variable token counts. BudgetPix seamlessly integrates with existing pixel-space diffusion architectures, enabling a single checkpoint to be operated at a wide range of compute budgets. Evaluated on text-to-image generation, BudgetPix matches the fidelity of MiniT2I-L at 512^2 and PixelDiT at 1024^2 using just 25% of the original compute budget. In class-conditional generation using a MeanFlow backbone, BudgetPix requires merely 60% of the full compute budget to produce images with near-zero quality degradation, observing a marginal 0.8-point increase in FID. Comprehensive assessments by human and VLM judges confirm that BudgetPix establishes a significantly improved quality-efficiency tradeoff over prior budget-adaptive baselines. More details are available at our project page: https://karaozgur.com/BudgetPix

High-resolution Vision-Language Models (VLMs) have been widely used in multimodal tasks to enhance accuracy by preserving detailed image information. However, these models often generate excessive visual tokens due to encoding multiple partitions of the input image. Processing these excessive visual tokens is computationally challenging, especially in resource-constrained environments with commodity GPUs. To support high-resolution images while meeting resource constraints, we propose High-Resolution Early Dropping (HiRED), a token-dropping scheme that operates within a fixed token budget before the Large Language Model (LLM) stage. HiRED can be integrated with existing high-resolution VLMs in a plug-and-play manner, as it requires no additional training while still maintaining superior accuracy. We strategically use the vision encoder's attention in the initial layers to assess the visual content of each image partition and allocate the token budget accordingly. Then, using the attention in the final layer, we select the most important visual tokens from each partition within the allocated budget, dropping the rest. Empirically, when applied to LLaVA-Next-7B on NVIDIA TESLA P40 GPU, HiRED with a 20% token budget increases token generation throughput by 4.7, reduces first-token generation latency by 15 seconds, and saves 2.3 GB of GPU memory for a single inference.

Most existing image tokenizers encode images into a fixed number of tokens or patches, overlooking the inherent variability in image complexity. To address this, we introduce Content-Adaptive Tokenizer (CAT), which dynamically adjusts representation capacity based on the image content and encodes simpler images into fewer tokens. We design a caption-based evaluation system that leverages large language models (LLMs) to predict content complexity and determine the optimal compression ratio for a given image, taking into account factors critical to human perception. Trained on images with diverse compression ratios, CAT demonstrates robust performance in image reconstruction. We also utilize its variable-length latent representations to train Diffusion Transformers (DiTs) for ImageNet generation. By optimizing token allocation, CAT improves the FID score over fixed-ratio baselines trained with the same flops and boosts the inference throughput by 18.5%.

Video Large Language Models (VLMs) have achieved remarkable results on a variety of vision language tasks, yet their practical use is limited by the "needle in a haystack" problem: the massive number of visual tokens produced from raw video frames exhausts the model's context window. Existing solutions alleviate this issue by selecting a sparse set of frames, thereby reducing token count, but such frame-wise selection discards essential temporal dynamics, leading to suboptimal reasoning about motion and event continuity. In this work we systematically explore the impact of temporal information and demonstrate that extending selection from isolated key frames to key clips, which are short, temporally coherent segments, improves video understanding. To maintain a fixed computational budget while accommodating the larger token footprint of clips, we propose an adaptive resolution strategy that dynamically balances spatial resolution and clip length, ensuring a constant token count per video. Experiments on three long-form video benchmarks demonstrate that our training-free approach, F2C, outperforms uniform sampling up to 8.1%, 5.6%, and 10.3% on Video-MME, LongVideoBench and MLVU benchmarks, respectively. These results highlight the importance of preserving temporal coherence in frame selection and provide a practical pathway for scaling Video LLMs to real world video understanding applications. Project webpage is available at https://guangyusun.com/f2c .

Modern large vision-language models (LVLMs) convert each input image into a large set of tokens, far outnumbering the text tokens. Although this improves visual perception, it introduces severe image token redundancy. Because image tokens carry sparse information, many add little to reasoning, yet greatly increase inference cost. The emerging image token pruning methods tackle this issue by identifying the most important tokens and discarding the rest. These methods can raise efficiency with only modest performance loss. However, most of them only consider single-image tasks and overlook multimodal in-context learning (ICL), where redundancy is greater and efficiency is more critical. Redundant tokens weaken the advantage of multimodal ICL for rapid domain adaptation and cause unstable performance. Applying existing pruning methods in this setting leads to large accuracy drops, exposing a clear gap and the need for new techniques. Thus, we propose Contextually Adaptive Token Pruning (CATP), a training-free pruning method targeted at multimodal ICL. CATP consists of two stages that perform progressive pruning to fully account for the complex cross-modal interactions in the input sequence. After removing 77.8\% of the image tokens, CATP produces an average performance gain of 0.6\% over the vanilla model on four LVLMs and eight benchmarks, exceeding all baselines remarkably. Meanwhile, it effectively improves efficiency by achieving an average reduction of 10.78\% in inference latency. CATP enhances the practical value of multimodal ICL and lays the groundwork for future progress in interleaved image-text scenarios.

Image and video diffusion models allocate equal computation to every region, even when the intended scene calls for varying levels of detail. The spatial distribution of detail can often be anticipated before generation, indicating where computation can be reduced. We introduce Level-of-Token (LoT) Diffusion, a framework that turns this knowledge into an explicit multiresolution token layout (Level-of-Token layout) for adaptive and efficient generation. Tokens represent rectangular patches of varying sizes and shapes, allocating finer tokens where detail is needed and coarser tokens elsewhere. We adapt pretrained diffusion transformers to LoT layouts through a patch-wise asymmetric flow parametrization and embeddings for multiresolution tokens, preserving full-resolution flow prediction at every denoising step while processing only a reduced token sequence. LoT Diffusion enables layout-adaptive generation while preserving pretrained generative priors. We demonstrate LoT with layouts derived from semantic masks, bounding boxes, texture variance, and depth-of-field cues, as well as agentic plans. Across image and video generation, LoT offers favorable quality-efficiency tradeoffs, with significant speedups determined by the layout's token budget. Our project website is at https://georgenakayama.github.io/lotdiffusion/.

Audio-Visual Large Language Models (AV-LLMs) face prohibitive computational overhead from massive audio and video tokens. Token reduction, while extensively explored for video-only LLMs, is insufficient for the audio-visual domain, as these unimodal methods cannot leverage audio-visual cross-modal synergies. Furthermore, the distinct and dynamic information densities of audio and video render static budgets per modality suboptimal. How to perform token reduction on a joint audio-visual stream thus remains an unaddressed bottleneck. To fill this gap, we introduce EchoingPixels, a framework inspired by the coexistence and interaction of visuals and sound in real-world scenes. The core of our framework is the Cross-Modal Semantic Sieve (CS2), a module enabling early audio-visual interaction. Instead of compressing modalities independently, CS2 co-attends to the joint multimodal stream and reduces tokens from an entire combined pool of audio-visual tokens rather than using fixed budgets per modality. This single-pool approach allows it to adaptively allocate the token budget across both modalities and dynamically identify salient tokens in concert. To ensure this aggressive reduction preserves the vital temporal modeling capability, we co-design a Synchronization-Augmented RoPE (Sync-RoPE) to maintain critical temporal relationships for the sparsely selected tokens. Extensive experiments demonstrate that EchoingPixels achieves performance comparable to strong baselines using only 5-20% of the original tokens, with a 2-3x speedup and memory reduction.

Adapting Multimodal Large Language Models (MLLMs) for hour-long videos is bottlenecked by context limits. Dense visual streams saturate token budgets and exacerbate the lost-in-the-middle phenomenon. Existing heuristics, like sparse sampling or uniform pooling, blindly sacrifice fidelity by discarding decisive moments and wasting bandwidth on irrelevant backgrounds. We propose Tempo, an efficient query-aware framework compressing long videos for downstream understanding. Tempo leverages a Small Vision-Language Model (SVLM) as a local temporal compressor, casting token reduction as an early cross-modal distillation process to generate compact, intent-aligned representations in a single forward pass. To enforce strict budgets without breaking causality, we introduce Adaptive Token Allocation (ATA). Exploiting the SVLM's zero-shot relevance prior and semantic front-loading, ATA acts as a training-free O(1) dynamic router. It allocates dense bandwidth to query-critical segments while compressing redundancies into minimal temporal anchors to maintain the global storyline. Extensive experiments show our 6B architecture achieves state-of-the-art performance with aggressive dynamic compression (0.5-16 tokens/frame). On the extreme-long LVBench (4101s), Tempo scores 52.3 under a strict 8K visual budget, outperforming GPT-4o and Gemini 1.5 Pro. Scaling to 2048 frames reaches 53.7. Crucially, Tempo compresses hour-long videos substantially below theoretical limits, proving true long-form video understanding relies on intent-driven efficiency rather than greedily padded context windows.

Vision transformer has emerged as a new paradigm in computer vision, showing excellent performance while accompanied by expensive computational cost. Image token pruning is one of the main approaches for ViT compression, due to the facts that the complexity is quadratic with respect to the token number, and many tokens containing only background regions do not truly contribute to the final prediction. Existing works either rely on additional modules to score the importance of individual tokens, or implement a fixed ratio pruning strategy for different input instances. In this work, we propose an adaptive sparse token pruning framework with a minimal cost. Specifically, we firstly propose an inexpensive attention head importance weighted class attention scoring mechanism. Then, learnable parameters are inserted as thresholds to distinguish informative tokens from unimportant ones. By comparing token attention scores and thresholds, we can discard useless tokens hierarchically and thus accelerate inference. The learnable thresholds are optimized in budget-aware training to balance accuracy and complexity, performing the corresponding pruning configurations for different input instances. Extensive experiments demonstrate the effectiveness of our approach. Our method improves the throughput of DeiT-S by 50% and brings only 0.2% drop in top-1 accuracy, which achieves a better trade-off between accuracy and latency than the previous methods.

Natural images concentrate their detail in a small fraction of the frame, yet diffusion models spend a full token on every patch, in every layer and at every timestep. The waste is largest in pixel-space models, with no autoencoder to absorb low-level redundancy first. Probing a pretrained pixel text-to-image transformer, we find its middle-block tokens redundant wherever the image is flat. The redundancy occupies connected, content-shaped regions, and exploiting it requires tokens with the same geometry. Cutting a Hilbert ordering of the patches provides them. Consecutive positions are always image neighbours, so any contiguous run is a connected region whose size and shape follow the content, and grouping in two dimensions becomes a cut in one. Existing reductions each lose part of this. Similarity merging scatters its groups, latent bottlenecks discard position, and skipping deletes what it should summarize. We cut where the model's features change most and pool each run into one region token. Our Region Token Interface () adapts a diffusion model to these tokens, with the region count drawn at random during fine-tuning so one checkpoint serves every budget. leads prior reduction methods at matched budgets, matches dense quality at 2.0times the speed, and stays close at 2.6times. The code and models are open-sourced at https://eduardzamfir.github.io/rti

Conventional Vision-Language Models(VLMs) typically utilize a fixed number of vision tokens, regardless of task complexity. This one-size-fits-all strategy introduces notable inefficiencies: using excessive tokens leads to unnecessary computational overhead in simpler tasks, whereas insufficient tokens compromise fine-grained visual comprehension in more complex contexts. To overcome these limitations, we present TokenFLEX, an innovative and adaptable vision-language framework that encodes images into a variable number of tokens for efficient integration with a Large Language Model (LLM). Our approach is underpinned by two pivotal innovations. Firstly, we present a novel training paradigm that enhances performance across varying numbers of vision tokens by stochastically modulating token counts during training. Secondly, we design a lightweight vision token projector incorporating an adaptive pooling layer and SwiGLU, allowing for flexible downsampling of vision tokens and adaptive selection of features tailored to specific token counts. Comprehensive experiments reveal that TokenFLEX consistently outperforms its fixed-token counterparts, achieving notable performance gains across various token counts enhancements of 1.6%, 1.0%, and 0.4% with 64, 144, and 256 tokens, respectively averaged over eight vision-language benchmarks. These results underscore TokenFLEX's remarkable flexibility while maintaining high-performance vision-language understanding.

Large Vision Language Models (LVLMs) have achieved significant success across multi-modal tasks. However, the computational cost of processing long visual tokens can be prohibitively expensive on resource-limited devices. Previous methods have identified redundancy in visual tokens within the Large Language Model (LLM) decoder layers and have mitigated this by pruning tokens using a pre-defined or fixed ratio, thereby reducing computational overhead. Nonetheless, we observe that the impact of pruning ratio varies across different LLM layers and instances (image-prompt pairs). Therefore, it is essential to develop a layer-wise and instance-wise vision token pruning strategy to balance computational cost and model performance effectively. We propose ATP-LLaVA, a novel approach that adaptively determines instance-specific token pruning ratios for each LLM layer. Specifically, we introduce an Adaptive Token Pruning (ATP) module, which computes the importance score and pruning threshold based on input instance adaptively. The ATP module can be seamlessly integrated between any two LLM layers with negligible computational overhead. Additionally, we develop a Spatial Augmented Pruning (SAP) strategy that prunes visual tokens with both token redundancy and spatial modeling perspectives. Our approach reduces the average token count by 75% while maintaining performance, with only a minimal 1.9% degradation across seven widely used benchmarks. The project page can be accessed via https://yxxxb.github.io/ATP-LLaVA-page/.

Over the past few years, the advancement of Multimodal Large Language Models (MLLMs) has captured the wide interest of researchers, leading to numerous innovations to enhance MLLMs' comprehension. In this paper, we present AdaptVision, a multimodal large language model specifically designed to dynamically process input images at varying resolutions. We hypothesize that the requisite number of visual tokens for the model is contingent upon both the resolution and content of the input image. Generally, natural images with a lower information density can be effectively interpreted by the model using fewer visual tokens at reduced resolutions. In contrast, images containing textual content, such as documents with rich text, necessitate a higher number of visual tokens for accurate text interpretation due to their higher information density. Building on this insight, we devise a dynamic image partitioning module that adjusts the number of visual tokens according to the size and aspect ratio of images. This method mitigates distortion effects that arise from resizing images to a uniform resolution and dynamically optimizing the visual tokens input to the LLMs. Our model is capable of processing images with resolutions up to 1008times 1008. Extensive experiments across various datasets demonstrate that our method achieves impressive performance in handling vision-language tasks in both natural and text-related scenes. The source code and dataset are now publicly available at https://github.com/harrytea/AdaptVision.

Multi-image vision-language models (VLMs) incur substantial computation when processing long visual sequences. Compressing these sequences must preserve complementary evidence across images and keep tokens from different images separate. Global selection can underrepresent question-relevant images, and pruning in early decoder layers risks removing relevant content before sufficient multimodal processing, yet existing methods spend most of the budget on these early layers. We propose SIEVE, a training-free, single-pass framework that jointly allocates visual tokens across images and decoder depth. SIEVE first pools each image into a compact spatial grid to reduce early processing cost. It then progressively selects representatives using prompt attention under equal per-image quotas and aggregates unselected tokens into similar representatives from the same image. These operations keep every image represented and its tokens separate from other images, while refining the retained representations. A closed-form schedule sets retention counts to target a prescribed average token budget across decoder layers. Across four VLM backbones, SIEVE achieves the highest average at a 6.25% budget on five multi-image benchmarks and four single-image benchmarks, and the highest mean on two video benchmarks. On LLaVA-OneVision-7B, it outperforms the strongest baseline by 9.96 and 9.03 points at 6.25% and 12.5% budgets, and at 12.5% it exceeds the uncompressed model by 2.01 points with 6.6x fewer prefill FLOPs.

In this paper, we introduce a novel visual representation learning which relies on a handful of adaptively learned tokens, and which is applicable to both image and video understanding tasks. Instead of relying on hand-designed splitting strategies to obtain visual tokens and processing a large number of densely sampled patches for attention, our approach learns to mine important tokens in visual data. This results in efficiently and effectively finding a few important visual tokens and enables modeling of pairwise attention between such tokens, over a longer temporal horizon for videos, or the spatial content in images. Our experiments demonstrate strong performance on several challenging benchmarks for both image and video recognition tasks. Importantly, due to our tokens being adaptive, we accomplish competitive results at significantly reduced compute amount. We obtain comparable results to the state-of-the-arts on ImageNet while being computationally more efficient. We also confirm the effectiveness of the approach on multiple video datasets, including Kinetics-400, Kinetics-600, Charades, and AViD. The code is available at: https://github.com/google-research/scenic/tree/main/scenic/projects/token_learner

Large Vision-Language Models (LVLMs) have shown impressive performance across multi-modal tasks by encoding images into thousands of tokens. However, the large number of image tokens results in significant computational overhead, and the use of dynamic high-resolution inputs further increases this burden. Previous approaches have attempted to reduce the number of image tokens through token pruning, typically by selecting tokens based on attention scores or image token diversity. Through empirical studies, we observe that existing methods often overlook the joint impact of pruning on both the current layer's output (local) and the outputs of subsequent layers (global), leading to suboptimal pruning decisions. To address this challenge, we propose Balanced Token Pruning (BTP), a plug-and-play method for pruning vision tokens. Specifically, our method utilizes a small calibration set to divide the pruning process into multiple stages. In the early stages, our method emphasizes the impact of pruning on subsequent layers, whereas in the deeper stages, the focus shifts toward preserving the consistency of local outputs. Extensive experiments across various LVLMs demonstrate the broad effectiveness of our approach on multiple benchmarks. Our method achieves a 78% compression rate while preserving 96.7% of the original models' performance on average.

Image tokenization has enabled major advances in autoregressive image generation by providing compressed, discrete representations that are more efficient to process than raw pixels. While traditional approaches use 2D grid tokenization, recent methods like TiTok have shown that 1D tokenization can achieve high generation quality by eliminating grid redundancies. However, these methods typically use a fixed number of tokens and thus cannot adapt to an image's inherent complexity. We introduce FlexTok, a tokenizer that projects 2D images into variable-length, ordered 1D token sequences. For example, a 256x256 image can be resampled into anywhere from 1 to 256 discrete tokens, hierarchically and semantically compressing its information. By training a rectified flow model as the decoder and using nested dropout, FlexTok produces plausible reconstructions regardless of the chosen token sequence length. We evaluate our approach in an autoregressive generation setting using a simple GPT-style Transformer. On ImageNet, this approach achieves an FID<2 across 8 to 128 tokens, outperforming TiTok and matching state-of-the-art methods with far fewer tokens. We further extend the model to support to text-conditioned image generation and examine how FlexTok relates to traditional 2D tokenization. A key finding is that FlexTok enables next-token prediction to describe images in a coarse-to-fine "visual vocabulary", and that the number of tokens to generate depends on the complexity of the generation task.

Vision-language models (VLMs) have achieved impressive performance on multimodal reasoning tasks such as visual question answering (VQA), but their inference cost remains a significant challenge due to the large number of vision tokens processed during the prefill stage. Existing pruning methods often rely on directly using the attention patterns or static text prompt guidance, failing to exploit the dynamic internal signals generated during inference. To address these issues, we propose AdaptInfer, a plug-and-play framework for adaptive vision token pruning in VLMs. First, we introduce a fine-grained, dynamic text-guided pruning mechanism that reuses layer-wise text-to-text attention maps to construct soft priors over text-token importance, allowing more informed scoring of vision tokens at each stage. Second, we perform an offline analysis of cross-modal attention shifts and identify consistent inflection locations in inference, which inspire us to propose a more principled and efficient pruning schedule. Our method is lightweight and plug-and-play, also generalizable across multi-modal tasks. Experimental results have verified the effectiveness of the proposed method. For example, it reduces CUDA latency by 61.3\% while maintaining an average accuracy of 92.9\% on vanilla LLaVA-1.5-7B. Under the same token budget, AdaptInfer surpasses SOTA in accuracy.

Multimodal Large Language Models (MLLMs) suffer from substantial computational overhead due to the high redundancy in visual token sequences. Existing approaches typically address this issue using single-layer Vision Transformer (ViT) features and static pruning strategies. However, such fixed configurations are often brittle under diverse instructions. To overcome these limitations, we propose CLASP, a plug-and-play token reduction framework based on class-adaptive layer fusion and dual-stage pruning. Specifically, CLASP first constructs category-specific visual representations through multi-layer vision feature fusion. It then performs dual-stage pruning, allocating the token budget between attention-salient pivot tokens for relevance and redundancy-aware completion tokens for coverage. Through class-adaptive pruning, CLASP enables prompt-conditioned feature fusion and budget allocation, allowing aggressive yet robust visual token reduction. Extensive experiments demonstrate that CLASP consistently outperforms existing methods across a wide range of benchmarks, pruning ratios, and MLLM architectures. Code will be available at https://github.com/Yunkaidang/CLASP.

Large Vision-Language Models (VLMs) have been extended to understand both images and videos. Visual token compression is leveraged to reduce the considerable token length of visual inputs. To meet the needs of different tasks, existing high-performance models usually process images and videos separately with different token compression strategies, limiting the capabilities of combining images and videos. To this end, we extend each image into a "static" video and introduce a unified token compression strategy called Progressive Visual Token Compression (PVC), where the tokens of each frame are progressively encoded and adaptively compressed to supplement the information not extracted from previous frames. Video tokens are efficiently compressed with exploiting the inherent temporal redundancy. Images are repeated as static videos, and the spatial details can be gradually supplemented in multiple frames. PVC unifies the token compressing of images and videos. With a limited number of tokens per frame (64 tokens by default), spatial details and temporal changes can still be preserved. Experiments show that our model achieves state-of-the-art performance across various video understanding benchmarks, including long video tasks and fine-grained short video tasks. Meanwhile, our unified token compression strategy incurs no performance loss on image benchmarks, particularly in detail-sensitive tasks.

GUI agents accumulate high-resolution screenshots as the trajectory unfolds, increasing inference latency and memory usage. Training-free visual token pruning can reduce this cost, but cache reuse introduces a fundamental constraint. Once tokens are discarded, the corresponding visual evidence cannot be recovered without re-encoding. Pruning therefore becomes an irreversible admission decision that must remain useful for unknown future targets while preserving coverage of operable regions under tight budgets. To address these challenges, we propose \method{}, a training-free framework for \textbf{Trajectory-robust Admission and Coverage-aware Evidence ordering}. Specifically, we combine a query-independent layout-derived interaction prior with instruction relevance and feature novelty to rank visual evidence according to both potential future utility and diversity. Then, we reserve part of the budget for native visual tokens distributed across the screen, repairing missing spatial coverage without breaking the ordering. Together, these mechanisms produce a nested token order, allowing retained visual evidence to shrink monotonically across budgets while remaining reusable throughout the trajectory. Finally, our monotone KV contraction incrementally contracts retired frames into compact session state, avoiding repeated visual encoding or pruning. Extensive experiments across six GUI benchmarks and diverse models verify the effectiveness of our proposed under tight budgets. The source code will be released.

Hour-long videos, streaming feeds, and movie-length content are pushing vision-language models (VLMs) past their breaking point -- the standard recipe of encoding each frame into visual tokens yields sequences that grow linearly with video length, causing prohibitive memory consumption and inference latency. Existing approaches, such as token reduction and keyframe selection, shorten the token sequence but leave the O(n) scaling intact, failing to resolve the fundamental bottleneck. We propose FramePack-U, a strikingly simple, training-free frame packing framework that compresses arbitrarily long videos into a fixed size visual representation at constant memory cost. FramePack-U requires no fine-tuning or architectural modification -- it plugs directly into off-the-shelf VLMs at inference time. Inspired by FramePack from the generation literature, we propose a content-aware compression strategy for visual understanding under a fixed token budget. Specifically, FramePack-U (1) scores each frame by its semantic similarity to the text prompt and ranks frames in a diversity-driven manner, and (2) packs the selected frames at varying resolutions into a fixed-length context window. This concentrates the memory budget on frames that are both instruction-relevant and visually diverse. While FramePack-U can in theory pack arbitrarily many frames into the fixed budget, we identify an empirical instantiation that generalizes robustly across settings. Extensive experiments on LongVideoBench, MLVU, and Video-MME show that FramePack-U consistently outperforms full-resolution baselines and prior token reduction and keyframe selection methods across diverse model families, parameter scales, and frame budgets. Notably, on Qwen3.5-35B-A3B with a 128-frame budget, FramePack-U yields gains of +12.9\%, +10.6\%, and +9.7\% over the official model on the three benchmarks, respectively.

Prevailing Multimodal Large Language Models (MLLMs) encode the input image(s) as vision tokens and feed them into the language backbone, similar to how Large Language Models (LLMs) process the text tokens. However, the number of vision tokens increases quadratically as the image resolutions, leading to huge computational costs. In this paper, we consider improving MLLM's efficiency from two scenarios, (I) Reducing computational cost without degrading the performance. (II) Improving the performance with given budgets. We start with our main finding that the ranking of each vision token sorted by attention scores is similar in each layer except the first layer. Based on it, we assume that the number of essential top vision tokens does not increase along layers. Accordingly, for Scenario I, we propose a greedy search algorithm (G-Search) to find the least number of vision tokens to keep at each layer from the shallow to the deep. Interestingly, G-Search is able to reach the optimal reduction strategy based on our assumption. For Scenario II, based on the reduction strategy from G-Search, we design a parametric sigmoid function (P-Sigmoid) to guide the reduction at each layer of the MLLM, whose parameters are optimized by Bayesian Optimization. Extensive experiments demonstrate that our approach can significantly accelerate those popular MLLMs, e.g. LLaVA, and InternVL2 models, by more than 2 times without performance drops. Our approach also far outperforms other token reduction methods when budgets are limited, achieving a better trade-off between efficiency and effectiveness.

Recent advancements in vision-language models (VLMs) have improved performance by increasing the number of visual tokens, which are often significantly longer than text tokens. However, we observe that most real-world scenarios do not require such an extensive number of visual tokens. While the performance drops significantly in a small subset of OCR-related tasks, models still perform accurately in most other general VQA tasks with only 1/4 resolution. Therefore, we propose to dynamically process distinct samples with different resolutions, and present a new paradigm for visual token compression, namely, VisionThink. It starts with a downsampled image and smartly decides whether it is sufficient for problem solving. Otherwise, the model could output a special token to request the higher-resolution image. Compared to existing Efficient VLM methods that compress tokens using fixed pruning ratios or thresholds, VisionThink autonomously decides whether to compress tokens case by case. As a result, it demonstrates strong fine-grained visual understanding capability on OCR-related tasks, and meanwhile saves substantial visual tokens on simpler tasks. We adopt reinforcement learning and propose the LLM-as-Judge strategy to successfully apply RL to general VQA tasks. Moreover, we carefully design a reward function and penalty mechanism to achieve a stable and reasonable image resize call ratio. Extensive experiments demonstrate the superiority, efficiency, and effectiveness of our method. Our code is available at https://github.com/dvlab-research/VisionThink.

Large Multimodal Models (LMMs) have shown significant visual reasoning capabilities by connecting a visual encoder and a large language model. LMMs typically take in a fixed and large amount of visual tokens, such as the penultimate layer features in the CLIP visual encoder, as the prefix content. Recent LMMs incorporate more complex visual inputs, such as high-resolution images and videos, which further increases the number of visual tokens significantly. However, due to the inherent design of the Transformer architecture, the computational costs of these models tend to increase quadratically with the number of input tokens. To tackle this problem, we explore a token reduction mechanism that identifies significant spatial redundancy among visual tokens. In response, we propose PruMerge, a novel adaptive visual token reduction strategy that significantly reduces the number of visual tokens without compromising the performance of LMMs. Specifically, to metric the importance of each token, we exploit the sparsity observed in the visual encoder, characterized by the sparse distribution of attention scores between the class token and visual tokens. This sparsity enables us to dynamically select the most crucial visual tokens to retain. Subsequently, we cluster the selected (unpruned) tokens based on their key similarity and merge them with the unpruned tokens, effectively supplementing and enhancing their informational content. Empirically, when applied to LLaVA-1.5, our approach can compress the visual tokens by 14 times on average, and achieve comparable performance across diverse visual question-answering and reasoning tasks. Code and checkpoints are at https://llava-prumerge.github.io/.

We present Soft Tail-dropping Adaptive Tokenizer (STAT), a 1D discrete visual tokenizer that adaptively chooses the number of output tokens per image according to its structural complexity and level of detail. STAT encodes an image into a sequence of discrete codes together with per-token keep probabilities. Beyond standard autoencoder objectives, we regularize these keep probabilities to be monotonically decreasing along the sequence and explicitly align their distribution with an image-level complexity measure. As a result, STAT produces length-adaptive 1D visual tokens that are naturally compatible with causal 1D autoregressive (AR) visual generative models. On ImageNet-1k, equipping vanilla causal AR models with STAT yields competitive or superior visual generation quality compared to other probabilistic model families, while also exhibiting favorable scaling behavior that has been elusive in prior vanilla AR visual generation attempts.

We present DyMU, an efficient, training-free framework that dynamically reduces the computational burden of vision-language models (VLMs) while maintaining high task performance. Our approach comprises two key components. First, Dynamic Token Merging (DToMe) reduces the number of visual token embeddings by merging similar tokens based on image complexity, addressing the inherent inefficiency of fixed-length outputs in vision transformers. Second, Virtual Token Unmerging (VTU) simulates the expected token sequence for large language models (LLMs) by efficiently reconstructing the attention dynamics of a full sequence, thus preserving the downstream performance without additional fine-tuning. Unlike previous approaches, our method dynamically adapts token compression to the content of the image and operates completely training-free, making it readily applicable to most state-of-the-art VLM architectures. Extensive experiments on image and video understanding tasks demonstrate that DyMU can reduce the average visual token count by 32%-85% while achieving comparable performance to full-length models across diverse VLM architectures, including the recently popularized AnyRes-based visual encoders. Furthermore, through qualitative analyses, we demonstrate that DToMe effectively adapts token reduction based on image complexity and, unlike existing systems, provides users more control over computational costs. Project page: https://mikewangwzhl.github.io/dymu/.

Token-based masked generative models are gaining popularity for their fast inference time with parallel decoding. While recent token-based approaches achieve competitive performance to diffusion-based models, their generation performance is still suboptimal as they sample multiple tokens simultaneously without considering the dependence among them. We empirically investigate this problem and propose a learnable sampling model, Text-Conditioned Token Selection (TCTS), to select optimal tokens via localized supervision with text information. TCTS improves not only the image quality but also the semantic alignment of the generated images with the given texts. To further improve the image quality, we introduce a cohesive sampling strategy, Frequency Adaptive Sampling (FAS), to each group of tokens divided according to the self-attention maps. We validate the efficacy of TCTS combined with FAS with various generative tasks, demonstrating that it significantly outperforms the baselines in image-text alignment and image quality. Our text-conditioned sampling framework further reduces the original inference time by more than 50% without modifying the original generative model.

Text-to-image (T2I) diffusion models have demonstrated impressive capabilities in generating high-quality images given a text prompt. However, ensuring the prompt-image alignment remains a considerable challenge, i.e., generating images that faithfully align with the prompt's semantics. Recent works attempt to improve the faithfulness by optimizing the latent code, which potentially could cause the latent code to go out-of-distribution and thus produce unrealistic images. In this paper, we propose FRAP, a simple, yet effective approach based on adaptively adjusting the per-token prompt weights to improve prompt-image alignment and authenticity of the generated images. We design an online algorithm to adaptively update each token's weight coefficient, which is achieved by minimizing a unified objective function that encourages object presence and the binding of object-modifier pairs. Through extensive evaluations, we show FRAP generates images with significantly higher prompt-image alignment to prompts from complex datasets, while having a lower average latency compared to recent latent code optimization methods, e.g., 4 seconds faster than D&B on the COCO-Subject dataset. Furthermore, through visual comparisons and evaluation on the CLIP-IQA-Real metric, we show that FRAP not only improves prompt-image alignment but also generates more authentic images with realistic appearances. We also explore combining FRAP with prompt rewriting LLM to recover their degraded prompt-image alignment, where we observe improvements in both prompt-image alignment and image quality.

Multimodal Large Language Models (MLLMs) have recently demonstrated strong performance across vision-language tasks. However, their high inference cost, arising from both the large number of input visual tokens and the heavy computation of the large language model (LLM), remains a key barrier to practical deployment. Recent work attempts to reduce the cost by adaptively optimizing individual dimensions, e.g., pruning redundant visual tokens or skipping LLM layers and heads. Nonetheless, prior approaches typically treat these dimensions independently and overlook a fundamental coupling: the available compute resources must be dynamically allocated across all dimensions based on the input content. To bridge the gap, we propose SmartVL, a unified adaptive inference framework that jointly controls vision token number and model compute capability in response to varying input contents and compute budgets. SmartVL introduces a vision-side token controller that dynamically selects informative visual tokens and an LLM-side compute controller that adaptively adjusts LLM computation. Importantly, these controllers are trained to coordinate with each other so that the overall inference cost satisfies a target budget. To allow this joint scheduling, we connect the controllers using a shared budget encoding and leverage a differentiable latency estimator for end-to-end training. This design enables SmartVL to learn cross-stage allocation strategies that adapt to both input complexity and runtime compute constraints. Experiments across multiple MLLM benchmarks demonstrate that, with joint scheduling, SmartVL consistently outperforms prior adaptive methods and achieves superior accuracy-efficiency Pareto frontiers. Project page: https://www.schaterji.io/publications/2026/jointtokencompute.

Streaming video understanding requires models to robustly encode, store, and retrieve information from a continuous video stream to support accurate video question answering (VQA). Existing state-of-the-art approaches rely on key-value caching to accumulate frame-level information over time, but use a limited number of tokens per frame, leading to the loss of fine-grained visual details. In this work, we propose scaling the token budget to enable more granular spatiotemporal understanding and reasoning. First, we find that current methods are ill-equipped to handle dense streams: their feature encoding causes query-frame similarity scores to increase over time, biasing retrieval toward later frames. To address this, we introduce an adaptive selection strategy that reduces token redundancy while preserving local spatiotemporal information. We further propose a training-free retrieval mixture-of-experts that leverages external models to better identify relevant frames. Our method, MemStream, achieves +8.0% on CG-Bench, +8.5% on LVBench, and +2.4% on VideoMME (Long) over ReKV with Qwen2.5-VL-7B.

Efficient video tokenization remains a key bottleneck in learning general purpose vision models that are capable of processing long video sequences. Prevailing approaches are restricted to encoding videos to a fixed number of tokens, where too few tokens will result in overly lossy encodings, and too many tokens will result in prohibitively long sequence lengths. In this work, we introduce ElasticTok, a method that conditions on prior frames to adaptively encode a frame into a variable number of tokens. To enable this in a computationally scalable way, we propose a masking technique that drops a random number of tokens at the end of each frames's token encoding. During inference, ElasticTok can dynamically allocate tokens when needed -- more complex data can leverage more tokens, while simpler data only needs a few tokens. Our empirical evaluations on images and video demonstrate the effectiveness of our approach in efficient token usage, paving the way for future development of more powerful multimodal models, world models, and agents.

The design of a video encoder determines when frames begin to interact and which frame-specific visual evidence remains accessible to the language model. Native video pathways couple neighboring frames during visual encoding, whereas image pathways preserve independently computed frame representations but incur a much larger visual-token cost when all image tokens are forwarded. We ask a basic question: whether a compact video encoder can instead be built on image representations. To answer this question, we separate three operations that are often coupled: per-frame representation, cross-frame token allocation, and temporal interaction. A frozen image encoder first produces frame-specific candidates. A question-aware selector then allocates a fixed token budget across frames using relevance, diversity, and cross-frame correspondence, after which a lightweight learned refiner reads neighboring-frame context and writes residual updates only to the retained anchors. This preserves source positions and keeps the visual output at the fixed budget. Across 13 benchmarks and three vision-language backbones, the resulting pathway matches full-image aggregate performance while using only about 28%-35% of its visual tokens. Specifically, on Qwen3-VL-8B, it achieves a 13-benchmark macro-average of 62.75 with 1,535 visual tokens, compared with 62.58 for the full Image pathway at 4,424 tokens and 59.49 for native Conv3D at 2,212 tokens. On Qwen3-VL-32B, it reaches a 13-benchmark macro-average of 66.28, compared with 66.09 for Image, while providing a 2.16x end-to-end speedup. These results show that compact video encoding does not require early temporal mixing: frame-specific evidence can be preserved first, allocated jointly, and temporally contextualized after selection.

Recent advances on Multi-modal Large Language Models have demonstrated that high-resolution image input is crucial for model capabilities, especially for fine-grained tasks. However, high-resolution images lead to a quadratic increase in the number of visual tokens input into LLMs, resulting in significant computational costs. Current work develop visual token compression methods to achieve efficiency improvements, often at the expense of performance. We argue that removing visual redundancy can simultaneously improve both efficiency and performance. We build a coarse-to-fine visual token compression method, with a vision-guided sampler for compressing redundant regions with low information density, and a text-guided sampler for selecting visual tokens that are strongly correlated with the user instructions.With these two modules, the proposed FocusLLaVA achieves improvements in both efficiency and performance. We validate the effectiveness of our approach on a wide range of evaluation datasets.

Visual tokens dominate inference cost in vision-language models (VLMs), yet many carry redundant information. Existing pruning methods alleviate this but typically rely on attention magnitude or similarity scores. We reformulate visual token pruning as capacity constrained communication: given a fixed budget K, the model must allocate limited bandwidth to maximally preserve visual information. We propose AutoSelect, which attaches a lightweight Scorer and Denoiser to a frozen VLM and trains with only the standard next token prediction loss, without auxiliary objectives or extra annotations. During training, a variance preserving noise gate modulates each token's information flow according to its predicted importance so that gradients propagate through all tokens; a diagonal attention Denoiser then recovers the perturbed representations. At inference, only the Scorer and a hard top-K selection remain, adding negligible latency. On ten VLM benchmarks, AutoSelect retains 96.5% of full model accuracy while accelerating LLM prefill by 2.85x with only 0.69 ms overhead, and transfers to different VLM backbones without architecture-specific tuning. Code is available at https://github.com/MedHK23/AutoSelect.

Amidst the advancements in image-based Large Vision-Language Models (image-LVLM), the transition to video-based models (video-LVLM) is hindered by the limited availability of quality video data. This paper addresses the challenge by leveraging the visual commonalities between images and videos to efficiently evolve image-LVLMs into video-LVLMs. We present a cost-effective video-LVLM that enhances model architecture, introduces innovative training strategies, and identifies the most effective types of video instruction data. Our innovative weighted token sampler significantly compresses the visual token numbers of each video frame, effectively cutting computational expenses. We also find that judiciously using just 10% of the video data, compared to prior video-LVLMs, yields impressive results during various training phases. Moreover, we delve into the influence of video instruction data in limited-resource settings, highlighting the significance of incorporating video training data that emphasizes temporal understanding to enhance model performance. The resulting Fewer Tokens and Fewer Videos LVLM (FTFV-LVLM) exhibits exceptional performance across video and image benchmarks, validating our model's design and training approaches.

Large Multimodal Models (LMMs) such as LLaVA have shown strong performance in visual-linguistic reasoning. These models first embed images into a fixed large number of visual tokens and then feed them into a Large Language Model (LLM). However, this design causes an excessive number of tokens for dense visual scenarios such as high-resolution images and videos, leading to great inefficiency. While token pruning/merging methods do exist, they produce a single length output for each image and do not afford flexibility in trading off information density v.s. efficiency. Inspired by the concept of Matryoshka Dolls, we propose M3: Matryoshka Multimodal Models, which learns to represent visual content as nested sets of visual tokens that capture information across multiple coarse-to-fine granularities. Our approach offers several unique benefits for LMMs: (1) One can explicitly control the visual granularity per test instance during inference, e.g. , adjusting the number of tokens used to represent an image based on the anticipated complexity or simplicity of the content; (2) M3 provides a framework for analyzing the granularity needed for existing datasets, where we find that COCO-style benchmarks only need around ~9 visual tokens to obtain accuracy similar to that of using all 576 tokens; (3) Our approach provides a foundation to explore the best trade-off between performance and visual token length at sample level, where our investigation reveals that a large gap exists between the oracle upper bound and current fixed-scale representations.

Vision encoders typically generate a large number of visual tokens, providing information-rich representations but significantly increasing computational demands. This raises the question of whether all generated tokens are equally valuable or if some of them can be discarded to reduce computational costs without compromising quality. In this paper, we introduce a new method for determining feature utility based on the idea that less valuable features can be reconstructed from more valuable ones. We implement this concept by integrating an autoencoder with a Gumbel-Softmax selection mechanism, that allows identifying and retaining only the most informative visual tokens. To validate our approach, we compared the performance of the LLaVA-NeXT model, using features selected by our method with randomly selected features. We found that on OCR-based tasks, more than 50% of the visual context can be removed with minimal performance loss, whereas randomly discarding the same proportion of features significantly affects the model capabilities. Furthermore, in general-domain tasks, even randomly retaining only 30% of tokens achieves performance comparable to using the full set of visual tokens. Our results highlight a promising direction towards adaptive and efficient multimodal pruning that facilitates scalable and low-overhead inference without compromising performance.

Popular video training methods mainly operate on a fixed number of tokens sampled from a predetermined spatiotemporal grid, resulting in sub-optimal accuracy-computation trade-offs due to inherent video redundancy. They also lack adaptability to varying computational budgets for downstream tasks, hindering applications of the most competitive model in real-world scenes. We thus propose a new test setting, Token Optimization, for maximized input information across budgets, which optimizes the size-limited set of input tokens through token selection from more suitably sampled videos. To this end, we propose a novel augmentation tool termed Flux. By making the sampling grid flexible and leveraging token selection, it is easily adopted in most popular video training frameworks, boosting model robustness with nearly no additional cost. We integrate Flux in large-scale video pre-training, and the resulting FluxViT establishes new state-of-the-art results across extensive tasks at standard costs. Notably, with 1/4 tokens only, it can still match the performance of previous state-of-the-art models with Token Optimization, yielding nearly 90\% savings. All models and data are available at https://github.com/OpenGVLab/FluxViT.

We present TokenVerse -- a method for multi-concept personalization, leveraging a pre-trained text-to-image diffusion model. Our framework can disentangle complex visual elements and attributes from as little as a single image, while enabling seamless plug-and-play generation of combinations of concepts extracted from multiple images. As opposed to existing works, TokenVerse can handle multiple images with multiple concepts each, and supports a wide-range of concepts, including objects, accessories, materials, pose, and lighting. Our work exploits a DiT-based text-to-image model, in which the input text affects the generation through both attention and modulation (shift and scale). We observe that the modulation space is semantic and enables localized control over complex concepts. Building on this insight, we devise an optimization-based framework that takes as input an image and a text description, and finds for each word a distinct direction in the modulation space. These directions can then be used to generate new images that combine the learned concepts in a desired configuration. We demonstrate the effectiveness of TokenVerse in challenging personalization settings, and showcase its advantages over existing methods. project's webpage in https://token-verse.github.io/

As context lengths scale, attention increasingly becomes a primary computational bottleneck in large language models. Standard Transformers remain powerful but computationally inefficient, as they allocate the same attention budget to every token regardless of its contextual demand. Existing local-global hybrids provide a more efficient alternative by mixing restricted- and full-context attention, but they typically allocate span statically across layers or heads. To address these limitations, we propose LoGo, a token-level dynamic local-global attention mechanism that uses attention span as a direct proxy for attention budget allocation. Each LoGo layer contains coupled local and global branches: all tokens receive efficient local attention over a restricted context window, while a learned gate activates global attention with full-context access only for tokens requiring long-range information. A threshold-based budget controller maintains a target global ratio without auxiliary losses, and a progressive masking schedule stabilizes training before sparse routing takes effect. We further implement query-sparse Triton kernels that convert reduced global-attention computation into practical speedups. Extensive experiments validate LoGo's effectiveness, showing that it preserves the scaling behavior of full-attention Transformers across model sizes. In controlled comparisons, LoGo improves over the full-attention Transformer and matched-budget static local-global hybrids, with clear gains on long-range retrieval. Analysis further shows that LoGo learns interpretable span allocation patterns. These results suggest that learned token-level span allocation is an effective and scalable way to improve the long-context performance-compute trade-off.

Multimodal Large Language Models (MLLMs) achieve stronger visual understanding by scaling input fidelity, yet the resulting visual token growth makes jointly sustaining high spatial resolution and long temporal context prohibitive. We argue that the bottleneck lies not in how post-encoding representations are compressed but in the volume of pixels the encoder receives, and address it with ResAdapt, an Input-side adaptation framework that learns how much visual budget each frame should receive before encoding. ResAdapt couples a lightweight Allocator with an unchanged MLLM backbone, so the backbone retains its native visual-token interface while receiving an operator-transformed input. We formulate allocation as a contextual bandit and train the Allocator with Cost-Aware Policy Optimization (CAPO), which converts sparse rollout feedback into a stable accuracy-cost learning signal. Across budget-controlled video QA, temporal grounding, and image reasoning tasks, ResAdapt improves low-budget operating points and often lies on or near the efficiency-accuracy frontier, with the clearest gains on reasoning-intensive benchmarks under aggressive compression. Notably, ResAdapt supports up to 16x more frames at the same visual budget while delivering over 15% performance gain. Code is available at https://github.com/Xnhyacinth/ResAdapt.

Diffusion Transformers (DiTs) are essential for video generation but suffer from significant latency due to the quadratic complexity of attention. By computing only critical tokens, sparse attention reduces computational costs and offers a promising acceleration approach. However, we identify that existing methods fail to approach optimal generation quality under the same computation budget for two reasons: (1) Inaccurate critical token identification: current methods cluster tokens based on position rather than semantics, leading to imprecise aggregated representations. (2) Excessive computation waste: critical tokens are scattered among non-critical ones, leading to wasted computation on GPUs, which are optimized for processing contiguous tokens. In this paper, we propose SVG2, a training-free framework that maximizes identification accuracy and minimizes computation waste, achieving a Pareto frontier trade-off between generation quality and efficiency. The core of SVG2 is semantic-aware permutation, which clusters and reorders tokens based on semantic similarity using k-means. This approach ensures both a precise cluster representation, improving identification accuracy, and a densified layout of critical tokens, enabling efficient computation without padding. Additionally, SVG2 integrates top-p dynamic budget control and customized kernel implementations, achieving up to 2.30x and 1.89x speedup while maintaining a PSNR of up to 30 and 26 on HunyuanVideo and Wan 2.1, respectively.

According to Algorithmic Information Theory (AIT) -- Intelligent representations compress data into the shortest possible program that can reconstruct its content, exhibiting low Kolmogorov Complexity (KC). In contrast, most visual representation learning systems use fixed-length representations for all inputs, ignoring variations in complexity or familiarity. Recent adaptive tokenization methods address this by allocating variable-length representations but typically require test-time search over multiple encodings to find the most predictive one. Inspired by Kolmogorov Complexity principles, we propose a single-pass adaptive tokenizer, KARL, which predicts the appropriate number of tokens for an image in a single forward pass, halting once its approximate KC is reached. The token count serves as a proxy for the minimum description length. KARL's training procedure closely resembles the Upside-Down Reinforcement Learning paradigm, as it learns to conditionally predict token halting based on a desired reconstruction quality. KARL matches the performance of recent adaptive tokenizers while operating in a single pass. We present scaling laws for KARL, analyzing the role of encoder/decoder size, continuous vs. discrete tokenization and more. Additionally, we offer a conceptual study drawing an analogy between Adaptive Image Tokenization and Algorithmic Information Theory, examining the predicted image complexity (KC) across axes such as structure vs. noise and in- vs. out-of-distribution familiarity -- revealing alignment with human intuition.

Autoregressive (AR) video generative models rely on video tokenizers that compress pixels into discrete token sequences. The length of these token sequences is crucial for balancing reconstruction quality against downstream generation computational cost. Traditional video tokenizers apply a uniform token assignment across temporal blocks of different videos, often wasting tokens on simple, static, or repetitive segments while underserving dynamic or complex ones. To address this inefficiency, we introduce EVATok, a framework to produce Efficient Video Adaptive Tokenizers. Our framework estimates optimal token assignments for each video to achieve the best quality-cost trade-off, develops lightweight routers for fast prediction of these optimal assignments, and trains adaptive tokenizers that encode videos based on the assignments predicted by routers. We demonstrate that EVATok delivers substantial improvements in efficiency and overall quality for video reconstruction and downstream AR generation. Enhanced by our advanced training recipe that integrates video semantic encoders, EVATok achieves superior reconstruction and state-of-the-art class-to-video generation on UCF-101, with at least 24.4% savings in average token usage compared to the prior state-of-the-art LARP and our fixed-length baseline.

In vision-language models (VLMs), visual tokens usually consume a significant amount of computational overhead, despite their sparser information density compared to text tokens. To address this, most existing methods learn a network to prune redundant visual tokens and require additional training data. Differently, we propose an efficient training-free token optimization mechanism dubbed SparseVLM without extra parameters or fine-tuning costs. Concretely, given that visual tokens complement text tokens in VLMs for linguistic reasoning, we select visual-relevant text tokens to rate the significance of vision tokens within the self-attention matrix extracted from the VLMs. Then we progressively prune irrelevant tokens. To maximize sparsity while retaining essential information, we introduce a rank-based strategy to adaptively determine the sparsification ratio for each layer, alongside a token recycling method that compresses pruned tokens into more compact representations. Experimental results show that our SparseVLM improves the efficiency of various VLMs across a range of image and video understanding tasks. In particular, LLaVA equipped with SparseVLM reduces 61% to 67% FLOPs with a compression ratio of 78% while maintaining 93% of the accuracy. Our code is available at https://github.com/Gumpest/SparseVLMs.

Image compression for machines calls for a unified codec that serves multiple downstream vision tasks. Existing approaches either adopt task-specific end-to-end designs, raising parameter and deployment overhead, or rely on transfer-based adaptations that remain externally attached and heuristic task design. A key limitation shared by both lines of work is their largely static computation pattern, which applies similar transformations across tokens despite the fact that different image regions exhibit markedly different semantic importance and complexity for machine perception. We propose MoECodec, a token-aware image compression framework that supports multiple downstream tasks within a single model. MoECodec replaces the FFN layers in transformer-based compression model token-wise Mixture-of-Experts (MoE), enabling dynamic, token-level computation conditioned on the input content and task objective. To make MoE effective in compression model, we introduce a stable routing strategy that combines expert-choice routing with spatial total variation regularization to encourage spatially coherent assignments, and we propose a lightweight expert architecture, Group Shuffle MLP (GShMLP), to control parameter growth. Extensive experiments show consistent improvement against baselines on both conventional image reconstruction and machine tasks.

Despite the recent success in many applications, the high computational requirements of vision transformers limit their use in resource-constrained settings. While many existing methods improve the quadratic complexity of attention, in most vision transformers, self-attention is not the major computation bottleneck, e.g., more than 80% of the computation is spent on fully-connected layers. To improve the computational complexity of all layers, we propose a novel token downsampling method, called Token Pooling, efficiently exploiting redundancies in the images and intermediate token representations. We show that, under mild assumptions, softmax-attention acts as a high-dimensional low-pass (smoothing) filter. Thus, its output contains redundancy that can be pruned to achieve a better trade-off between the computational cost and accuracy. Our new technique accurately approximates a set of tokens by minimizing the reconstruction error caused by downsampling. We solve this optimization problem via cost-efficient clustering. We rigorously analyze and compare to prior downsampling methods. Our experiments show that Token Pooling significantly improves the cost-accuracy trade-off over the state-of-the-art downsampling. Token Pooling is a simple and effective operator that can benefit many architectures. Applied to DeiT, it achieves the same ImageNet top-1 accuracy using 42% fewer computations.

Visual tokenizers play a central role in latent image generation by bridging high-dimensional images and tractable generative modeling. However, most existing tokenizers are still trained with reconstruction-dominated objectives, which often yield latent representations that are only weakly grounded in high-level semantics. Recent approaches improve semantic alignment, but typically treat semantic signals as auxiliary regularization rather than making them functionally necessary for representation learning. We propose SMAP, a SeMantic-Aware Prefix tokenizer that injects class-level semantic conditions into a query-based 1D tokenization framework. To make semantics indispensable during training, SMAP introduces a tail token dropping strategy, which forces semantic conditions and early latent prefixes to bear increasing responsibility under progressively reduced token budgets. To verify that the resulting latent space is useful for generation rather than reconstruction alone, we further introduce CARD, a hybrid Causal AutoRegressive--Diffusion generator. Extensive experiments on ImageNet show that SMAP consistently improves reconstruction quality across discrete and continuous tokenization settings, and that its semantically grounded latent space yields strong downstream generation performance under compact token budgets.

Visual instruction tuning aims to enable large language models to comprehend the visual world, with a pivotal challenge lying in establishing an effective vision-to-language projection. However, existing methods often grapple with the intractable trade-off between accuracy and efficiency. In this paper, we present LLaVA-Meteor, a novel approach designed to break this deadlock, equipped with a novel Top-Down Compression paradigm that strategically compresses visual tokens without compromising core information. Specifically, we construct a trainable Flash Global Fusion module based on efficient selective state space operators, which aligns the feature space while enabling each token to perceive holistic visual context and instruction preference at low cost. Furthermore, a local-to-single scanning manner is employed to effectively capture local dependencies, thereby enhancing the model's capability in vision modeling. To alleviate computational overhead, we explore a Visual-Native Selection mechanism that independently assesses token significance by both the visual and native experts, followed by aggregation to retain the most critical subset. Extensive experiments show that our approach reduces visual tokens by 75--95% while achieving comparable or superior performance across 12 benchmarks, significantly improving efficiency.

Large vision-language models (VLMs) typically process hundreds or thousands of visual tokens per image or video frame, incurring quadratic attention cost and substantial redundancy. Existing token reduction methods often ignore the textual query or rely on deep attention maps, whose instability under aggressive pruning leads to degraded semantic alignment. We propose FlashVLM, a text guided visual token selection framework that dynamically adapts visual inputs to the query. Instead of relying on noisy attention weights, FlashVLM computes an explicit cross modal similarity between projected image tokens and normalized text embeddings in the language model space. This extrinsic relevance is fused with intrinsic visual saliency using log domain weighting and temperature controlled sharpening. In addition, a diversity preserving partition retains a minimal yet representative set of background tokens to maintain global context. Under identical token budgets and evaluation protocols, FlashVLM achieves beyond lossless compression, slightly surpassing the unpruned baseline while pruning up to 77.8 percent of visual tokens on LLaVA 1.5, and maintaining 92.8 percent accuracy even under 94.4 percent compression. Extensive experiments on 14 image and video benchmarks demonstrate that FlashVLM delivers state of the art efficiency performance trade offs while maintaining strong robustness and generalization across mainstream VLMs.

Multimodal large language models have become the dominant paradigm for visual understanding, but incur substantial costs by encoding inputs into dense, fixed-size patch tokens. However, visual information is unevenly distributed: some regions require fine-grained detail, while others admit compact representations. Downsampling sacrifices this detail, while existing token pruning and adaptive approaches remain limited in content-adaptive granularity, task generalization, and integration with modern MLLMs and serving infrastructure. Overcoming these limitations calls for foundation models that learn, end to end, where-and at what granularity-to allocate visual representations, a native capability we term elastic visual representation weaving. We introduce VisionWeave, establishing this capability in frontier-level MLLMs through large-scale training. It combines two components: a gated spatial pooler constructs coarse-grained representations alongside native fine-grained representations within a shared MRoPE coordinate, while a granularity router learns their content-adaptive allocation. Through self-distillation alone, we validate this capability on Qwen3.5-4B and scale to Qwen3.8-27B with over 30K A100 GPU-hours. Based on Qwen3.8-27B, VisionWeave adaptively adjusts token savings to visual content, saving 43.0% tokens on average while retaining 98.9% native performance across eight benchmarks, versus only 88% performance preserved for token pruning baselines with a fixed 50% savings target. Extensive evaluations confirm robust efficiency-quality trade-offs across diverse tasks, resolutions and video frames. When deployed on SGLang serving engine, our method achieves a 2.3x throughput gain while reducing mean TTFT by 54.4% and mean TPOT by 60.6%. Together, we believe these results position elastic visual weaving as a promising capability for next-generation multimodal models.

We introduce LLaVA-OneVision-2 (LLaVA-OV-2), the most capable vision-language model in the LLaVA-OneVision series to date, achieving superior performance across a broad range of multimodal benchmarks. The model builds on a native OneVision-Encoder and incorporates Windowed Attention for efficient local computation while maintaining native resolution. Its key advance is codec-stream tokenization: it treats compressed video as a continuous bit-cost stream, where bit-cost dynamics determine adaptive temporal groups, and motion-residual cues select salient spatial evidence into compact visual canvases. This allocation concentrates a limited token budget on event-bearing content, enabling more stable long-video token compression than fixed groups of pictures. A shared 3D RoPE further places codec canvases, sampled frames, and images in a unified spatiotemporal coordinate system. Furthermore, we build the LLaVA-OV-2 data and training stack around large-scale open supervision: approximately 8M re-captioned video samples for pretraining, a 4M-sample spatial corpus for fine-tuning. We also introduce JumpScore, a temporal-localization benchmark targeting fine-grained grounding in high-frequency, densely repeated motion, a regime underrepresented by existing video evaluations. A standout capability of LLaVA-OV-2 is its unified perception across video understanding, temporal grounding, spatial grounding, and manipulation-trace reasoning. On JumpScore, LLaVA-OneVision-2-8B reaches 74.9 JumpScore mAP, surpassing Qwen3-VL-8B (30.1) by +44.8 points; under matched visual-token budgets on the same benchmark, codec-stream inputs improve temporal grounding over frame sampling by +9.7 points. Across standard benchmarks, LLaVA-OneVision-2-8B further outperforms Qwen3-VL-8B by +4.3 average points on video tasks, +5.3 on spatial tasks, and +15.6 average J&F on tracking tasks.

Vision-language models improve perception by feeding increasingly long visual token sequences into language backbones, but the resulting inference cost raises a basic scaling question: as multimodal models grow, how many visual tokens are actually needed, and how should they be allocated under a fixed visual token budget? Existing training-free pruning methods typically answer this with one-shot proxies such as decoder attention, visual similarity, or conditional diversity. We argue that visual token pruning is better viewed as task-conditioned evidence search, especially under aggressive compression and across model scales. We propose F^3A, a training-free router for visual token pruning that operates before the language model consumes image tokens. F^3A builds lightweight question-conditioned cues, matches them to visual-grid tokens through frozen sparse sensing heads, and allocates a fixed vision token budget via coarse evidence localization, local refinement, coverage-preserving competition, and recovery of under-covered regions. It requires no model training, no extra LLM forward pass and preserves the original multimodal prompting and decoding pipeline.

Large Vision-Language Models (LVLMs) have adopted visual token pruning strategies to mitigate substantial computational overhead incurred by extensive visual token sequences. While prior works primarily focus on either attention-based or diversity-based pruning methods, in-depth analysis of these approaches' characteristics and limitations remains largely unexplored. In this work, we conduct thorough empirical analysis using effective rank (erank) as a measure of feature diversity and attention score entropy to investigate visual token processing mechanisms and analyze the strengths and weaknesses of each approach. Our analysis reveals two insights: (1) Our erank-based quantitative analysis shows that many diversity-oriented pruning methods preserve substantially less feature diversity than intended; moreover, analysis using the CHAIR dataset reveals that the diversity they do retain is closely tied to increased hallucination frequency compared to attention-based pruning. (2) We further observe that attention-based approaches are more effective on simple images where visual evidence is concentrated, while diversity-based methods better handle complex images with distributed features. Building on these empirical insights, we show that incorporating image-aware adjustments into existing hybrid pruning strategies consistently improves their performance. We also provide a minimal instantiation of our empirical findings through a simple adaptive pruning mechanism, which achieves strong and reliable performance across standard benchmarks as well as hallucination-specific evaluations. Our project page available at https://cvsp-lab.github.io/AgilePruner.

Accurate and efficient discrete video tokenization is essential for long video sequences processing. Yet, the inherent complexity and variable information density of videos present a significant bottleneck for current tokenizers, which rigidly compress all content at a fixed rate, leading to redundancy or information loss. Drawing inspiration from Shannon's information theory, this paper introduces InfoTok, a principled framework for adaptive video tokenization. We rigorously prove that existing data-agnostic training methods are suboptimal in representation length, and present a novel evidence lower bound (ELBO)-based algorithm that approaches theoretical optimality. Leveraging this framework, we develop a transformer-based adaptive compressor that enables adaptive tokenization. Empirical results demonstrate state-of-the-art compression performance, saving 20% tokens without influence on performance, and achieving 2.3x compression rates while still outperforming prior heuristic adaptive approaches. By allocating tokens according to informational richness, InfoTok enables a more compressed yet accurate tokenization for video representation, offering valuable insights for future research.

Large Vision-Language Models (LVLMs) have recently demonstrated strong multimodal understanding, yet their fine-grained visual perception is often constrained by low input resolutions. A common remedy is to partition high-resolution images into multiple sub-images for separate encoding, but this approach drastically inflates the number of visual tokens and introduces prohibitive inference overhead. To overcome this challenge, we propose Pyramid Token Pruning (PTP), a training-free strategy that hierarchically integrates bottom-up visual saliency at both region and token levels with top-down instruction-guided relevance. Inspired by human visual cognition, PTP selectively preserves more tokens from salient regions while further emphasizing those most relevant to task instructions. Extensive experiments on 13 diverse benchmarks show that PTP substantially reduces computational cost, memory usage, and inference latency, with negligible performance degradation.

Visual inputs in vision-language models (VLMs) are often encoded into substantially longer token sequences than text, making visual tokens a major bottleneck for efficient inference. Abundant recent methods address this bottleneck by scoring token importance and pruning low-scoring tokens in a single pass. However, one-shot scoring is insufficient because a token's prompt-relevant usefulness depends on the evidence already retained. Motivated by this insight, we introduce DIVE (Dynamic Iterative Visual Evidence Construction), a training-free framework that recasts visual-token pruning as dynamic evidence construction. DIVE repeatedly selects the remaining token with the highest residual-conditioned score, updates the visual and prompt residuals to discount the evidence already explained, and re-evaluates the remaining tokens. This select-update-re-evaluate process builds a retained set of complementary, prompt-relevant evidence. Experiments across eight image-understanding benchmarks show that DIVE consistently preserves performance across token budgets. With an 88.9% reduction in visual tokens, DIVE retains 98.2% of the uncompressed model's average performance. Code is available at https://github.com/Zhong-Chenchen/DIVE.git.

Vision-language models offer a promising path toward automating radiology report generation, but applying them to full 3D CT volumes poses substantial computational challenges. Modern foundation vision encoders (VEs) can produce tens of thousands of vision tokens per scan, making the visual sequence passed to the large language model (LLM) a primary computational bottleneck. Vision-to-language projectors can compress this sequence to reduce computation, but may discard clinically relevant detail; conversely, effective compression can accommodate higher-resolution inputs while keeping the downstream token count fixed. How this vision-token budget should be allocated across input field of view, spatial resolution, and vision-to-language projection therefore remains an open design question. We systematically evaluate four heterogeneous VEs (CNN- and ViT-based), five token-reducing projectors at up to 64x compression alongside a non-reducing MLP projector baseline, and five instruction-tuned LLMs (1.7B--4B) on two large-scale CT report datasets (CT-RATE and Merlin). At matched LLM token budgets, anatomy-guided region of interest cropping is the most consistent strategy, improving clinical macro F1 in 19 of 20 settings by +3.7 points on average for the 3D ViT Primus encoder and +1.1 for the slice-based 2D ViT Curia encoder. Increasing input resolution further is strongly projector-dependent: the PerceiverResampler, paired with higher-resolution Curia features, yields the strongest configuration in the resolution study on both datasets. Our best configurations achieve state-of-the-art clinical macro F1 on the test sets, reaching 49.5 on CT-RATE and 49.0 on Merlin. Code and models will be published upon publication.

Diffusion models have shown strong capabilities in generating high-quality images from text prompts. However, these models often require large-scale training data and significant computational resources to train, or suffer from heavy structure with high latency. To this end, we propose Efficient Multimodal Diffusion Transformer (E-MMDiT), an efficient and lightweight multimodal diffusion model with only 304M parameters for fast image synthesis requiring low training resources. We provide an easily reproducible baseline with competitive results. Our model for 512px generation, trained with only 25M public data in 1.5 days on a single node of 8 AMD MI300X GPUs, achieves 0.66 on GenEval and easily reaches to 0.72 with some post-training techniques such as GRPO. Our design philosophy centers on token reduction as the computational cost scales significantly with the token count. We adopt a highly compressive visual tokenizer to produce a more compact representation and propose a novel multi-path compression module for further compression of tokens. To enhance our design, we introduce Position Reinforcement, which strengthens positional information to maintain spatial coherence, and Alternating Subregion Attention (ASA), which performs attention within subregions to further reduce computational cost. In addition, we propose AdaLN-affine, an efficient lightweight module for computing modulation parameters in transformer blocks. Our code is available at https://github.com/AMD-AGI/Nitro-E and we hope E-MMDiT serves as a strong and practical baseline for future research and contributes to democratization of generative AI models.

Long visual token sequences often account for a substantial fraction of the computational overhead in multimodal large language models~(MLLMs). Existing approaches reduce this cost by pruning redundant visual tokens, but permanently discard visual evidence that may become useful in subsequent layers. We instead ask whether all visual tokens can be preserved while reducing the cost of repeatedly evolving the representations through the Transformer. To answer this question, we perform low-rank interventions on visual-to-text information flow. We find that, after visual-to-text attention is blocked, restoring only a few directions recovers most of the lost accuracy, suggesting the relevant visual influence is concentrated in a low-dimensional subspace. We further observe strong predictability in layer-specific visual states: lightweight MLPs approximate them with high cosine similarity and low reconstruction error. Motivated by these findings, we propose δ-Vision, which replaces repeated Transformer evolution of visual tokens with lightweight low-rank adapters that construct layer-wise visual memories while preserving all visual tokens for text retrieval. Across image and video benchmarks, δ-Vision achieves higher accuracy than visual token pruning baselines at comparable or lower computation, while delivering competitive inference efficiency without discarding visual tokens.

We need billion-scale images to achieve more generalizable and ground-breaking vision models, as well as massive dataset storage to ship the images (e.g., the LAION-4B dataset needs 240TB storage space). However, it has become challenging to deal with unlimited dataset storage with limited storage infrastructure. A number of storage-efficient training methods have been proposed to tackle the problem, but they are rarely scalable or suffer from severe damage to performance. In this paper, we propose a storage-efficient training strategy for vision classifiers for large-scale datasets (e.g., ImageNet) that only uses 1024 tokens per instance without using the raw level pixels; our token storage only needs <1% of the original JPEG-compressed raw pixels. We also propose token augmentations and a Stem-adaptor module to make our approach able to use the same architecture as pixel-based approaches with only minimal modifications on the stem layer and the carefully tuned optimization settings. Our experimental results on ImageNet-1k show that our method significantly outperforms other storage-efficient training methods with a large gap. We further show the effectiveness of our method in other practical scenarios, storage-efficient pre-training, and continual learning. Code is available at https://github.com/naver-ai/seit

Recent breakthroughs in text-to-image diffusion models have significantly advanced the generation of high-fidelity, photo-realistic images from textual descriptions. Yet, these models often struggle with interpreting spatial arrangements from text, hindering their ability to produce images with precise spatial configurations. To bridge this gap, layout-to-image generation has emerged as a promising direction. However, training-based approaches are limited by the need for extensively annotated datasets, leading to high data acquisition costs and a constrained conceptual scope. Conversely, training-free methods face challenges in accurately locating and generating semantically similar objects within complex compositions. This paper introduces a novel training-free approach designed to overcome adversarial semantic intersections during the diffusion conditioning phase. By refining intra-token loss with selective sampling and enhancing the diffusion process with attention redistribution, we propose two innovative constraints: 1) an inter-token constraint that resolves token conflicts to ensure accurate concept synthesis; and 2) a self-attention constraint that improves pixel-to-pixel relationships. Our evaluations confirm the effectiveness of leveraging layout information for guiding the diffusion process, generating content-rich images with enhanced fidelity and complexity. Code is available at https://github.com/Papple-F/csg.git.

Large Multimodal Models (LMMs) excel in visual-language tasks by leveraging numerous visual tokens for fine-grained visual information, but this token redundancy results in significant computational costs. Previous research aimed at reducing visual tokens during inference typically leverages importance maps derived from attention scores among vision-only tokens or vision-language tokens to prune tokens across one or multiple pruning stages. Despite this progress, pruning frameworks and strategies remain simplistic and insufficiently explored, often resulting in substantial performance degradation. In this paper, we propose VFlowOpt, a token pruning framework that introduces an importance map derivation process and a progressive pruning module with a recycling mechanism. The hyperparameters of its pruning strategy are further optimized by a visual information flow-guided method. Specifically, we compute an importance map for image tokens based on their attention-derived context relevance and patch-level information entropy. We then decide which tokens to retain or prune and aggregate the pruned ones as recycled tokens to avoid potential information loss. Finally, we apply a visual information flow-guided method that regards the last token in the LMM as the most representative signal of text-visual interactions. This method minimizes the discrepancy between token representations in LMMs with and without pruning, thereby enabling superior pruning strategies tailored to different LMMs. Experiments demonstrate that VFlowOpt can prune 90% of visual tokens while maintaining comparable performance, leading to an 89% reduction in KV-Cache memory and 3.8 times faster inference.

Unified models aim to support both understanding and generation by encoding images into discrete tokens and processing them alongside text within a single autoregressive framework. This unified design offers architectural simplicity and cross-modal synergy, which facilitates shared parameterization, consistent training objectives, and seamless transfer between modalities. However, the large number of visual tokens required by such models introduces substantial computation and memory overhead, and this inefficiency directly hinders deployment in resource constrained scenarios such as embodied AI systems. In this work, we propose a unified token compression algorithm UniCompress that significantly reduces visual token count while preserving performance on both image understanding and generation tasks. Our method introduces a plug-in compression and decompression mechanism guided with learnable global meta tokens. The framework is lightweight and modular, enabling efficient integration into existing models without full retraining. Experimental results show that our approach reduces image tokens by up to 4 times, achieves substantial gains in inference latency and training cost, and incurs only minimal performance degradation, which demonstrates the promise of token-efficient unified modeling for real world multimodal applications.

Visual-token compression is effective for improving the efficiency of vision-language models, but under extreme compression budgets, token pruning can break visual grounding while learned resamplers increase parameter count, attention cost, and training complexity. We revisit compression through a token parameterization lens, separating (i) basis transformation and structured truncation (retained subspace/compressibility) from (ii) coordinate organization (optimization and cross-modal alignment). This view yields two coupled objectives, compressibility and learnability, which we formalize as unified functionals. Guided by these objectives, we design Braco, a lightweight four-step coder that combines transform-basis truncation, input-independent basis-coordinate embeddings, budget-dependent orthogonal re-parameterization, and learned spatial residual tokens from lightweight pooling. Experiments show that Braco forms the favorable empirical accuracy-efficiency frontier under 23times--64times compression and remains competitive at 144times, reaching 95.2% accuracy while reducing prefill FLOPs by 84.2%--86.7% relative to the uncompressed upper bound. Against prior methods, Braco matches or improves accuracy while achieving up to approximately 36% end-to-end speedup and using 16.6times/78.8times lower compressor latency/FLOPs.

Decoder-only autoregressive image generation typically relies on fixed-length tokenization schemes whose token counts grow quadratically with resolution, substantially increasing the computational and memory demands of attention. We present DPAR, a novel decoder-only autoregressive model that dynamically aggregates image tokens into a variable number of patches for efficient image generation. Our work is the first to demonstrate that next-token prediction entropy from a lightweight and unsupervised autoregressive model provides a reliable criterion for merging tokens into larger patches based on information content. DPAR makes minimal modifications to the standard decoder architecture, ensuring compatibility with multimodal generation frameworks and allocating more compute to generation of high-information image regions. Further, we demonstrate that training with dynamically sized patches yields representations that are robust to patch boundaries, allowing DPAR to scale to larger patch sizes at inference. DPAR reduces token count by 1.81x and 2.06x on Imagenet 256 and 384 generation resolution respectively, leading to a reduction of up to 40% FLOPs in training costs. Further, our method exhibits faster convergence and improves FID by up to 27.1% relative to baseline models.

Large language models (LLMs) have enabled the creation of multi-modal LLMs that exhibit strong comprehension of visual data such as images and videos. However, these models usually rely on extensive visual tokens from visual encoders, leading to high computational demands, which limits their applicability in resource-constrained environments and for long-context tasks. In this work, we propose a training-free adaptive inference method for multi-modal LLMs that can accommodate a broad range of efficiency requirements with a minimum performance drop. Our method consists of a) iterative token merging based on embedding similarity before LLMs, and b) progressive token pruning within LLM layers based on multi-modal importance. With a minimalist design, our method can be applied to both video and image LLMs. Extensive experiments on diverse video and image benchmarks demonstrate that, our method substantially reduces computation load (e.g., a 7-fold reduction in FLOPs) while preserving the performance of video and image LLMs. Further, under a similar computational cost, our method outperforms the state-of-the-art methods in long video understanding (e.g., +4.6 on MLVU). Additionally, our in-depth analysis provides insights into token redundancy and LLM layer behaviors, offering guidance for future research in designing efficient multi-modal LLMs. Our code will be available at https://github.com/LaVi-Lab/AIM.

Leveraging the powerful representations of pre-trained vision foundation models -- traditionally used for visual comprehension -- we explore a novel direction: building an image tokenizer directly atop such models, a largely underexplored area. Specifically, we employ a frozen vision foundation model as the encoder of our tokenizer. To enhance its effectiveness, we introduce two key components: (1) a region-adaptive quantization framework that reduces redundancy in the pre-trained features on regular 2D grids, and (2) a semantic reconstruction objective that aligns the tokenizer's outputs with the foundation model's representations to preserve semantic fidelity. Based on these designs, our proposed image tokenizer, VFMTok, achieves substantial improvements in image reconstruction and generation quality, while also enhancing token efficiency. It further boosts autoregressive (AR) generation -- achieving a gFID of 2.07 on ImageNet benchmarks, while accelerating model convergence by three times, and enabling high-fidelity class-conditional synthesis without the need for classifier-free guidance (CFG). The code will be released publicly to benefit the community.

Discrete image tokenizers have emerged as a key component of modern vision and multimodal systems, providing a sequential interface for transformer-based architectures. However, most existing approaches remain primarily optimized for reconstruction and compression, often yielding tokens that capture local texture rather than object-level semantic structure. Inspired by the incremental and compositional nature of human communication, we introduce COMmunication inspired Tokenization (COMiT), a framework for learning structured discrete visual token sequences. COMiT constructs a latent message within a fixed token budget by iteratively observing localized image crops and recurrently updating its discrete representation. At each step, the model integrates new visual information while refining and reorganizing the existing token sequence. After several encoding iterations, the final message conditions a flow-matching decoder that reconstructs the full image. Both encoding and decoding are implemented within a single transformer model and trained end-to-end using a combination of flow-matching reconstruction and semantic representation alignment losses. Our experiments demonstrate that while semantic alignment provides grounding, attentive sequential tokenization is critical for inducing interpretable, object-centric token structure and substantially improving compositional generalization and relational reasoning over prior methods.

Vision-language MoE batches contain different numbers of image and text tokens. Image resolution, image count, tiling, and prompt length all change this token mix. We call the standard token-level Switch auxiliary loss Std-Aux. Std-Aux balances only the mixed load, so large image and text load errors can cancel at one mix. On our main model, the same trained router shows more than a fivefold change in load imbalance across image resolutions. We hold the image and text load profiles fixed and derive the exact load curve as the token mix varies. The image-text load gap controls sensitivity to the token mix. Physical preprocessing can also change the conditional profiles. The fixed-profile law excludes such changes. To design a remedy, we examine the router input structure. Image and text occupy distinct regions, while visual tokens group strongly by source image. The modality boundary motivates separate image and text terms. The image boundary motivates one equal-weight routing instance per image. ReBA, or Relax Within, Balance Across, implements both choices. Across four split backbones, ReBA lowers load on every reported benchmark input while keeping mean task accuracy comparable to Std-Aux. ReBA also lowers average load over the tested range and worst physical load under resolution and tiling shifts. Code is available at https://github.com/ZiangWu-77/ReBA.

Visual tokenizers map high-dimensional raw pixels into a compressed representation for downstream modeling. Beyond compression, tokenizers dictate what information is preserved and how it is organized. A de facto standard approach to video tokenization is to represent a video as a spatiotemporal 3D grid of tokens, each capturing the corresponding local information in the original signal. This requires the downstream model that consumes the tokens, e.g., a text-to-video model, to learn to predict all low-level details "pixel-by-pixel" irrespective of the video's inherent complexity, leading to high learning complexity. We present VideoFlexTok, which represents videos with a variable-length sequence of tokens structured in a coarse-to-fine manner -- where the first tokens (emergently) capture abstract information, such as semantics and motion, and later tokens add fine-grained details. The generative flow decoder enables realistic video reconstructions from any token count. This representation structure allows adapting the token count according to downstream needs and encoding videos longer than the baselines with the same budget. We evaluate VideoFlexTok on class- and text-to-video generative tasks and show that it leads to more efficient training compared to 3D grid tokens, e.g., achieving comparable generation quality (gFVD and ViCLIP Score) with a 5x smaller model (1.1B vs 5.2B). Finally, we demonstrate how VideoFlexTok can enable long video generation without prohibitive computational cost by training a text-to-video model on 10-second 81-frame videos with only 672 tokens, 8x fewer than a comparable 3D grid tokenizer.

We present TokenFlow, a novel unified image tokenizer that bridges the long-standing gap between multimodal understanding and generation. Prior research attempt to employ a single reconstruction-targeted Vector Quantization (VQ) encoder for unifying these two tasks. We observe that understanding and generation require fundamentally different granularities of visual information. This leads to a critical trade-off, particularly compromising performance in multimodal understanding tasks. TokenFlow addresses this challenge through an innovative dual-codebook architecture that decouples semantic and pixel-level feature learning while maintaining their alignment via a shared mapping mechanism. This design enables direct access to both high-level semantic representations crucial for understanding tasks and fine-grained visual features essential for generation through shared indices. Our extensive experiments demonstrate TokenFlow's superiority across multiple dimensions. Leveraging TokenFlow, we demonstrate for the first time that discrete visual input can surpass LLaVA-1.5 13B in understanding performance, achieving a 7.2\% average improvement. For image reconstruction, we achieve a strong FID score of 0.63 at 384*384 resolution. Moreover, TokenFlow establishes state-of-the-art performance in autoregressive image generation with a GenEval score of 0.55 at 256*256 resolution, achieving comparable results to SDXL.

Recent advances in long video understanding typically mitigate visual redundancy through visual token pruning based on attention distribution. However, while existing methods employ post-hoc low-response token pruning in decoder layers, they overlook the input-level semantic correlation between visual tokens and instructions (query). In this paper, we propose QuoTA, an ante-hoc training-free modular that extends existing large video-language models (LVLMs) for visual token assignment based on query-oriented frame-level importance assessment. The query-oriented token selection is crucial as it aligns visual processing with task-specific requirements, optimizing token budget utilization while preserving semantically relevant content. Specifically, (i) QuoTA strategically allocates frame-level importance scores based on query relevance, enabling one-time visual token assignment before cross-modal interactions in decoder layers, (ii) we decouple the query through Chain-of-Thoughts reasoning to facilitate more precise LVLM-based frame importance scoring, and (iii) QuoTA offers a plug-and-play functionality that extends to existing LVLMs. Extensive experimental results demonstrate that implementing QuoTA with LLaVA-Video-7B yields an average performance improvement of 3.2% across six benchmarks (including Video-MME and MLVU) while operating within an identical visual token budget as the baseline. Codes are open-sourced at https://github.com/MAC-AutoML/QuoTA.

Recently, non-convolutional models such as the Vision Transformer (ViT) and Vision Mamba (Vim) have achieved remarkable performance in computer vision tasks. However, their reliance on fixed-size patches often results in excessive encoding of background regions and omission of critical local details, especially when informative objects are sparsely distributed. To address this, we introduce a fully differentiable Dynamic Adaptive Region Tokenizer (DART), which adaptively partitions images into content-dependent patches of varying sizes. DART combines learnable region scores with piecewise differentiable quantile operations to allocate denser tokens to information-rich areas. Despite introducing only approximately 1 million (1M) additional parameters, DART improves accuracy by 2.1% on DeiT (ImageNet-1K). Unlike methods that uniformly increase token density to capture fine-grained details, DART offers a more efficient alternative, achieving 45% FLOPs reduction with superior performance. Extensive experiments on DeiT, Vim, and VideoMamba confirm that DART consistently enhances accuracy while incurring minimal or even reduced computational overhead. Code is available at https://github.com/HCPLab-SYSU/DART.

Large Vision Language Models (LVLMs) have been widely adopted to guide vision foundation models in performing reasoning segmentation tasks, achieving impressive performance. However, the substantial computational overhead associated with LVLMs presents a new challenge. The primary source of this computational cost arises from processing hundreds of image tokens. Therefore, an effective strategy to mitigate such overhead is to reduce the number of image tokens, a process known as image token pruning. Previous studies on image token pruning for LVLMs have primarily focused on high level visual understanding tasks, such as visual question answering and image captioning. In contrast, guiding vision foundation models to generate accurate visual masks based on textual queries demands precise semantic and spatial reasoning capabilities. Consequently, pruning methods must carefully control individual image tokens throughout the LVLM reasoning process. Our empirical analysis reveals that existing methods struggle to adequately balance reductions in computational overhead with the necessity to maintain high segmentation accuracy. In this work, we propose LVLM_CSP, a novel training free visual token pruning method specifically designed for LVLM based reasoning segmentation tasks. LVLM_CSP consists of three stages: clustering, scattering, and pruning. Initially, the LVLM performs coarse-grained visual reasoning using a subset of selected image tokens. Next, fine grained reasoning is conducted, and finally, most visual tokens are pruned in the last stage. Extensive experiments demonstrate that LVLM_CSP achieves a 65% reduction in image token inference FLOPs with virtually no accuracy degradation, and a 70% reduction with only a minor 1% drop in accuracy on the 7B LVLM.

The application of Large Vision-Language Models (LVLMs) for analyzing images and videos is an exciting and rapidly evolving field. In recent years, we've seen significant growth in high-quality image-text datasets for fine-tuning image understanding, but there is still a lack of comparable datasets for videos. Additionally, many VideoLLMs are extensions of single-image VLMs, which may not efficiently handle the complexities of longer videos. In this study, we introduce a large-scale synthetic dataset created from proprietary models, using carefully designed prompts to tackle a wide range of questions. We also explore a dynamic visual token compression architecture that strikes a balance between computational efficiency and performance. Our proposed achieves state-of-the-art results across various video tasks and shows impressive generalization, setting new baselines in multi-image understanding. Notably, delivers an absolute improvement of 2.7\% over LLaVA-OneVision on VideoMME and 10.7\% on MuirBench. Codes are available at https://github.com/Hon-Wong/ByteVideoLLM

Multimodal large language models (MLLMs) have attracted considerable attention due to their exceptional performance in visual content understanding and reasoning. However, their inference efficiency has been a notable concern, as the increasing length of multimodal contexts leads to quadratic complexity. Token compression techniques, which reduce the number of visual tokens, have demonstrated their effectiveness in reducing computational costs. Yet, these approaches have struggled to keep pace with the rapid advancements in MLLMs, especially the AnyRes strategy in the context of high-resolution image understanding. In this paper, we propose a novel token compression method, GlobalCom^2, tailored for high-resolution MLLMs that receive both the thumbnail and multiple crops. GlobalCom^2 treats the tokens derived from the thumbnail as the "commander" of the entire token compression process, directing the allocation of retention ratios and the specific compression for each crop. In this way, redundant tokens are eliminated while important local details are adaptively preserved to the highest extent feasible. Empirical results across 10 benchmarks reveal that GlobalCom^2 achieves an optimal balance between performance and efficiency, and consistently outperforms state-of-the-art token compression methods with LLaVA-NeXT-7B/13B models. Our code is released at https://github.com/xuyang-liu16/GlobalCom2.

The cost of deploying vision transformers increasingly represents a barrier to wider industrial adoption. Existing compression requires additional end-to-end fine-tuning or incurs a significant drawback to runtime, thus making them ill-suited for online inference. We introduce the Visual Word Tokenizer (VWT), a training-free method for reducing energy costs while retaining performance and runtime. The VWT groups patches (visual subwords) that are frequently used into visual words while infrequent ones remain intact. To do so, intra-image or inter-image statistics are leveraged to identify similar visual concepts for compression. Experimentally, we demonstrate a reduction in wattage of up to 19% with only a 20% increase in runtime at most. Comparative approaches of 8-bit quantization and token merging achieve a lower or similar energy efficiency but exact a higher toll on runtime (up to 2times or more). Our results indicate that VWTs are well-suited for efficient online inference with a marginal compromise on performance.

We introduce Representation Tokenizer (RepTok), a generative modeling framework that represents an image using a single continuous latent token obtained from self-supervised vision transformers. Building on a pre-trained SSL encoder, we fine-tune only the semantic token embedding and pair it with a generative decoder trained jointly using a standard flow matching objective. This adaptation enriches the token with low-level, reconstruction-relevant details, enabling faithful image reconstruction. To preserve the favorable geometry of the original SSL space, we add a cosine-similarity loss that regularizes the adapted token, ensuring the latent space remains smooth and suitable for generation. Our single-token formulation resolves spatial redundancies of 2D latent spaces and significantly reduces training costs. Despite its simplicity and efficiency, RepTok achieves competitive results on class-conditional ImageNet generation and naturally extends to text-to-image synthesis, reaching competitive zero-shot performance on MS-COCO under extremely limited training budgets. Our findings highlight the potential of fine-tuned SSL representations as compact and effective latent spaces for efficient generative modeling.

Emerging Omni-modal Large Language Models (OmniLLMs) enable unified understanding of text, audio, and video, but their long audio-video token sequences introduce substantial memory and inference costs. Existing compression methods mainly focus on selecting important tokens under fixed budgets, leaving the preceding budget-allocation problem underexplored. We show that direct query-to-audio/video similarity is unreliable for inter-modal budget allocation, and that uniform intra-modal budgets can miss key evidence while retaining redundant content. To address these limitations, we propose OmniDelta, a training-free, skill-driven framework that couples intent-aware inter-modal allocation with content-aware intra-modal allocation. OmniDelta first constructs audio and video skill pools to shift the fixed retained-token budget according to query demand, then reallocates modality budgets over audio segments and video frames using local complexity and temporal redundancy. The resulting local budgets can be combined with existing pruning strategies, preserving the total retained-token ratio while changing where the budget is spent. Experiments on four audio-video benchmarks with two Qwen2.5-Omni models show that OmniDelta establishes a new accuracy-efficiency Pareto frontier across pruning ratios. At 25% token retention on Qwen2.5-Omni-7B, OmniDelta reduces GPU memory by 22.0% and achieves a 1.64x end-to-end speedup over full-token inference.

In large vision-language models (LVLMs), images serve as inputs that carry a wealth of information. As the idiom "A picture is worth a thousand words" implies, representing a single image in current LVLMs can require hundreds or even thousands of tokens. This results in significant computational costs, which grow quadratically as input image resolution increases, thereby severely impacting the efficiency of both training and inference. Previous approaches have attempted to reduce the number of image tokens either before or within the early layers of LVLMs. However, these strategies inevitably result in the loss of crucial image information, ultimately diminishing model performance. To address this challenge, we conduct an empirical study revealing that all visual tokens are necessary for LVLMs in the shallow layers, and token redundancy progressively increases in the deeper layers of the model. To this end, we propose PyramidDrop, a visual redundancy reduction strategy for LVLMs to boost their efficiency in both training and inference with neglectable performance loss. Specifically, we partition the LVLM into several stages and drop part of the image tokens at the end of each stage with a pre-defined ratio, creating pyramid-like visual tokens across model layers. The dropping is based on a lightweight similarity calculation with a negligible time overhead. Extensive experiments demonstrate that PyramidDrop can achieve a 40% training time and 55% inference FLOPs acceleration of LLaVA-NeXT with comparable performance. Besides, the PyramidDrop could also serve as a plug-and-play strategy for inference acceleration without training, with better performance and lower inference cost than counterparts. We hope that the insights and approach introduced by PyramidDrop will inspire future research to further investigate the role of image tokens in LVLMs.

Visual token reduction lowers inference costs caused by extensive image features in large vision-language models (LVLMs). Unlike relevant studies that prune tokens in self-attention-only LVLMs, our work uniquely addresses cross-attention-based models, which achieve superior performance. We identify that the key-value (KV) cache size for image tokens in cross-attention layers significantly exceeds that of text tokens in self-attention layers, posing a major compute bottleneck. To mitigate this issue, we exploit the sparse nature in cross-attention maps to selectively prune redundant visual features. Our Trimmed Llama effectively reduces KV cache demands without requiring additional training. By benefiting from 50%-reduced visual features, our model can reduce inference latency and memory usage while achieving benchmark parity.

Autoregressive (AR) modeling, known for its next-token prediction paradigm, underpins state-of-the-art language and visual generative models. Traditionally, a ``token'' is treated as the smallest prediction unit, often a discrete symbol in language or a quantized patch in vision. However, the optimal token definition for 2D image structures remains an open question. Moreover, AR models suffer from exposure bias, where teacher forcing during training leads to error accumulation at inference. In this paper, we propose xAR, a generalized AR framework that extends the notion of a token to an entity X, which can represent an individual patch token, a cell (a ktimes k grouping of neighboring patches), a subsample (a non-local grouping of distant patches), a scale (coarse-to-fine resolution), or even a whole image. Additionally, we reformulate discrete token classification as continuous entity regression, leveraging flow-matching methods at each AR step. This approach conditions training on noisy entities instead of ground truth tokens, leading to Noisy Context Learning, which effectively alleviates exposure bias. As a result, xAR offers two key advantages: (1) it enables flexible prediction units that capture different contextual granularity and spatial structures, and (2) it mitigates exposure bias by avoiding reliance on teacher forcing. On ImageNet-256 generation benchmark, our base model, xAR-B (172M), outperforms DiT-XL/SiT-XL (675M) while achieving 20times faster inference. Meanwhile, xAR-H sets a new state-of-the-art with an FID of 1.24, running 2.2times faster than the previous best-performing model without relying on vision foundation modules (\eg, DINOv2) or advanced guidance interval sampling.

In recent years, general visual foundation models (VFMs) have witnessed increasing adoption, particularly as image encoders for popular multi-modal large language models (MLLMs). However, without semantically fine-grained supervision, these models still encounter fundamental prediction errors in the context of downstream text-image-related tasks, i.e., perception, understanding and reasoning with images containing small and dense texts. To bridge this gap, we develop TokenOCR, the first token-level visual foundation model specifically tailored for text-image-related tasks, designed to support a variety of traditional downstream applications. To facilitate the pretraining of TokenOCR, we also devise a high-quality data production pipeline that constructs the first token-level image text dataset, TokenIT, comprising 20 million images and 1.8 billion token-mask pairs. Furthermore, leveraging this foundation with exceptional image-as-text capability, we seamlessly replace previous VFMs with TokenOCR to construct a document-level MLLM, TokenVL, for VQA-based document understanding tasks. Finally, extensive experiments demonstrate the effectiveness of TokenOCR and TokenVL. Code, datasets, and weights will be available at https://token-family.github.io/TokenOCR_project.

Image tokenizers are crucial for visual generative models, e.g., diffusion models (DMs) and autoregressive (AR) models, as they construct the latent representation for modeling. Increasing token length is a common approach to improve the image reconstruction quality. However, tokenizers with longer token lengths are not guaranteed to achieve better generation quality. There exists a trade-off between reconstruction and generation quality regarding token length. In this paper, we investigate the impact of token length on both image reconstruction and generation and provide a flexible solution to the tradeoff. We propose ImageFolder, a semantic tokenizer that provides spatially aligned image tokens that can be folded during autoregressive modeling to improve both generation efficiency and quality. To enhance the representative capability without increasing token length, we leverage dual-branch product quantization to capture different contexts of images. Specifically, semantic regularization is introduced in one branch to encourage compacted semantic information while another branch is designed to capture the remaining pixel-level details. Extensive experiments demonstrate the superior quality of image generation and shorter token length with ImageFolder tokenizer.

Current image tokenization methods require a large number of tokens to capture the information contained within images. Although the amount of information varies across images, most image tokenizers only support fixed-length tokenization, leading to inefficiency in token allocation. In this study, we introduce One-D-Piece, a discrete image tokenizer designed for variable-length tokenization, achieving quality-controllable mechanism. To enable variable compression rate, we introduce a simple but effective regularization mechanism named "Tail Token Drop" into discrete one-dimensional image tokenizers. This method encourages critical information to concentrate at the head of the token sequence, enabling support of variadic tokenization, while preserving state-of-the-art reconstruction quality. We evaluate our tokenizer across multiple reconstruction quality metrics and find that it delivers significantly better perceptual quality than existing quality-controllable compression methods, including JPEG and WebP, at smaller byte sizes. Furthermore, we assess our tokenizer on various downstream computer vision tasks, including image classification, object detection, semantic segmentation, and depth estimation, confirming its adaptability to numerous applications compared to other variable-rate methods. Our approach demonstrates the versatility of variable-length discrete image tokenization, establishing a new paradigm in both compression efficiency and reconstruction performance. Finally, we validate the effectiveness of tail token drop via detailed analysis of tokenizers.

Large Vision-Language Models (LVLMs) map visual inputs into dense token sequences, imposing a quadratic computational bottleneck for inference. Elastic visual-token compression addresses this by training a single model that can run at multiple visual-token budgets. However, existing approaches struggle under aggressive compression. Spatial-only compression, as in nested pooling, behaves as an imperfect low-pass filter and induces spectral aliasing that obscures fine-grained detail. Query-only compression, as in nested query resampling, replaces explicit grid-aligned tokens with non-local summaries and substantially degrades spatial grounding. To resolve this representational conflict, we introduce PARCEL (Pool-Anchored Resampling with Conditioned Elastic Queries for Efficient Vision-Language Understanding), a visual tokenization architecture that dynamically partitions the labor of feature extraction. PARCEL establishes spatial pool tokens as low-frequency layout anchors and conditions elastic query tokens on these anchors through Pool-Conditioned Query Resampling. This encourages query tokens to focus on complementary visual features rather than redundant spatial mapping. Extensive evaluations across 27 benchmarks show that PARCEL improves the performance-efficiency Pareto frontier, consistently outperforming existing matryoshka baselines across visual-token budgets while preserving the "train once, deploy anywhere" paradigm.

Vision-Language Models (VLMs) typically replace the predefined image placeholder token (<image>) in textual instructions with visual features from an image encoder, forming the input to a backbone Large Language Model (LLM). However, the large number of vision tokens significantly increases the context length, leading to high computational overhead and inference latency. While previous efforts mitigate this by selecting only important visual features or leveraging learnable queries to reduce token count, they often compromise performance or introduce substantial extra costs. In response, we propose Fourier-VLM, a simple yet efficient method that compresses visual representations in the frequency domain. Our approach is motivated by the observation that vision features output from the vision encoder exhibit concentrated energy in low-frequency components. Leveraging this, we apply a low-pass filter to the vision features using a two-dimensional Discrete Cosine Transform (DCT). Notably, the DCT is efficiently computed via the Fast Fourier Transform (FFT) operator with a time complexity of O(nlog n), minimizing the extra computational cost while introducing no additional parameters. Extensive experiments across various image-based benchmarks demonstrate that Fourier-VLM achieves competitive performance with strong generalizability across both LLaVA and Qwen-VL architectures. Crucially, it reduce inference FLOPs by up to 83.8% and boots generation speed by 31.2% compared to LLaVA-v1.5, highlighting the superior efficiency and practicality.

Visual token reduction is an effective way to accelerate multimodal large language models (MLLMs), but performance deteriorates rapidly under extremely low token budgets. Existing work has explored both visual-token selection and training-based adaptation to reduced visual inputs. We take a step further by asking how a heavily compressed MLLM should learn from the states induced by its own generations. This setting naturally calls for on-policy self-distillation: a heavily compressed model is supervised on the states induced by its own generations, while its full-token counterpart serves as an information-rich teacher. Based on this insight, we propose LT-OPD, a training framework for extreme visual-token reduction. The student rolls out responses with only a small fraction of visual tokens, and a frozen full-token copy of the same MLLM provides distributional supervision along these student-generated trajectories. To stabilize on-policy learning when visual evidence is severely limited, we further introduce a budget-level curriculum that progressively decreases the token budget during training. Across nine benchmarks on Qwen3.5-4B, LT-OPD raises average retained performance under 5% visual-token retention from 68.6% to 82.3%, outperforming training-free, training-based, and reinforcement-learning baselines at the same budget. The gains transfer consistently to Qwen3.5-9B, GLM-4.6V-9B, and LLaVA-OV-1.5-4B. LT-OPD also reduces KV-cache usage by 85.2% and prefill FLOPs by 85.4% without additional inference overhead, demonstrating that on-policy learning can substantially recover capabilities lost to extreme visual-token reduction.

Multimodal image fusion aims to integrate complementary information from different modalities into a fused image that preserves rich local details while maintaining globally consistent appearance. Existing approaches build shared representations on 2D feature grids, which excel at modeling local structures but offer limited leverage over image-level global appearance factors. To balance these objectives, we introduce a compact 1D token interface based on a frozen pretrained image tokenizer for modeling non-local appearance/base factors. Rather than using the tokenizer as a reconstruction backbone, our design uses the 1D token space as a global carrier while retaining the 2D spatial pathway for local structure restoration. Specifically, we introduce Selective Token Editing (STE), which sparsely updates/replaces a small set of critical tokens, providing a lightweight mechanism to steer global appearance coherence while keeping the fusion backbone unchanged and avoiding extra losses. Experiments on four commonly used benchmarks show that our method achieves the best overall performance, with consistent, multi-metric improvements in both global coherence and local fidelity. Project page: https://zju-xyc.github.io/1D-Fusion-Project-Page/

Recent advances in autoregressive (AR) models with continuous tokens for image generation show promising results by eliminating the need for discrete tokenization. However, these models face efficiency challenges due to their sequential token generation nature and reliance on computationally intensive diffusion-based sampling. We present ECAR (Efficient Continuous Auto-Regressive Image Generation via Multistage Modeling), an approach that addresses these limitations through two intertwined innovations: (1) a stage-wise continuous token generation strategy that reduces computational complexity and provides progressively refined token maps as hierarchical conditions, and (2) a multistage flow-based distribution modeling method that transforms only partial-denoised distributions at each stage comparing to complete denoising in normal diffusion models. Holistically, ECAR operates by generating tokens at increasing resolutions while simultaneously denoising the image at each stage. This design not only reduces token-to-image transformation cost by a factor of the stage number but also enables parallel processing at the token level. Our approach not only enhances computational efficiency but also aligns naturally with image generation principles by operating in continuous token space and following a hierarchical generation process from coarse to fine details. Experimental results demonstrate that ECAR achieves comparable image quality to DiT Peebles & Xie [2023] while requiring 10times FLOPs reduction and 5times speedup to generate a 256times256 image.

Transformer-based methods have demonstrated impressive performance in low-level visual tasks such as Image Super-Resolution (SR). However, its computational complexity grows quadratically with the spatial resolution. A series of works attempt to alleviate this problem by dividing Low-Resolution images into local windows, axial stripes, or dilated windows. SR typically leverages the redundancy of images for reconstruction, and this redundancy appears not only in local regions but also in long-range regions. However, these methods limit attention computation to content-agnostic local regions, limiting directly the ability of attention to capture long-range dependency. To address these issues, we propose a lightweight Content-Aware Token Aggregation Network (CATANet). Specifically, we propose an efficient Content-Aware Token Aggregation module for aggregating long-range content-similar tokens, which shares token centers across all image tokens and updates them only during the training phase. Then we utilize intra-group self-attention to enable long-range information interaction. Moreover, we design an inter-group cross-attention to further enhance global information interaction. The experimental results show that, compared with the state-of-the-art cluster-based method SPIN, our method achieves superior performance, with a maximum PSNR improvement of 0.33dB and nearly double the inference speed.

Large Multimodal Models (LMMs) have become a pivotal research focus in deep learning, demonstrating remarkable capabilities in 3D scene understanding. However, current 3D LMMs employing thousands of spatial tokens for multimodal reasoning suffer from critical inefficiencies: excessive computational overhead and redundant information flows. Unlike 2D VLMs processing single images, 3D LMMs exhibit inherent architectural redundancy due to the heterogeneous mechanisms between spatial tokens and visual tokens. To address this challenge, we propose AdaToken-3D, an adaptive spatial token optimization framework that dynamically prunes redundant tokens through spatial contribution analysis. Our method automatically tailors pruning strategies to different 3D LMM architectures by quantifying token-level information flows via attention pattern mining. Extensive experiments on LLaVA-3D (a 7B parameter 3D-LMM) demonstrate that AdaToken-3D achieves 21\% faster inference speed and 63\% FLOPs reduction while maintaining original task accuracy. Beyond efficiency gains, this work systematically investigates redundancy patterns in multimodal spatial information flows through quantitative token interaction analysis. Our findings reveal that over 60\% of spatial tokens contribute minimally (<5\%) to the final predictions, establishing theoretical foundations for efficient 3D multimodal learning.

Large language and multimodal models (LLMs and LMMs) exhibit strong inference capabilities but are often limited by slow decoding speeds. This challenge is especially acute in LMMs, where visual inputs typically comprise more tokens with lower information density than text -- an issue exacerbated by recent trends toward finer-grained visual tokenizations to boost performance. Speculative decoding has been effective in accelerating LLM inference by using a smaller draft model to generate candidate tokens, which are then selectively verified by the target model, improving speed without sacrificing output quality. While this strategy has been extended to LMMs, existing methods largely overlook the unique properties of visual inputs and depend solely on text-based draft models. In this work, we propose FLASH (Fast Latent-Aware Semi-Autoregressive Heuristics), a speculative decoding framework designed specifically for LMMs, which leverages two key properties of multimodal data to design the draft model. First, to address redundancy in visual tokens, we propose a lightweight latent-aware token compression mechanism. Second, recognizing that visual objects often co-occur within a scene, we employ a semi-autoregressive decoding strategy to generate multiple tokens per forward pass. These innovations accelerate draft decoding while maintaining high acceptance rates, resulting in faster overall inference. Experiments show that FLASH significantly outperforms prior speculative decoding approaches in both unimodal and multimodal settings, achieving up to 2.68times speed-up on video captioning and 2.55times on visual instruction tuning tasks compared to the original LMM. Our code is available https://github.com/ZihuaEvan/FlashSD/{[here]}.

This paper proposes a fundamentally new paradigm for image generation through set-based tokenization and distribution modeling. Unlike conventional methods that serialize images into fixed-position latent codes with a uniform compression ratio, we introduce an unordered token set representation to dynamically allocate coding capacity based on regional semantic complexity. This TokenSet enhances global context aggregation and improves robustness against local perturbations. To address the critical challenge of modeling discrete sets, we devise a dual transformation mechanism that bijectively converts sets into fixed-length integer sequences with summation constraints. Further, we propose Fixed-Sum Discrete Diffusion--the first framework to simultaneously handle discrete values, fixed sequence length, and summation invariance--enabling effective set distribution modeling. Experiments demonstrate our method's superiority in semantic-aware representation and generation quality. Our innovations, spanning novel representation and modeling strategies, advance visual generation beyond traditional sequential token paradigms. Our code and models are publicly available at https://github.com/Gengzigang/TokenSet.

The rapid success of Vision Large Language Models (VLLMs) often depends on the high-resolution images with abundant visual tokens, which hinders training and deployment efficiency. Current training-free visual token compression methods exhibit serious performance degradation in tasks involving high-resolution, text-oriented image understanding and reasoning. In this paper, we propose an efficient visual token compression framework for text-oriented VLLMs in high-resolution scenarios. In particular, we employ a light-weight self-distillation pre-training stage to compress the visual tokens, requiring a limited numbers of image-text pairs and minimal learnable parameters. Afterwards, to mitigate potential performance degradation of token-compressed models, we construct a high-quality post-train stage. To validate the effectiveness of our method, we apply it to an advanced VLLMs, InternVL2. Experimental results show that our approach significantly reduces computational overhead while outperforming the baselines across a range of text-oriented benchmarks. We will release the models and code soon.

Diffusion vision-language models (DVLMs) process their entire input at every denoising step. Since visual tokens make up 89-97% of this input on the benchmarks we study, most of the decoding computation is spent repeatedly processing the same image. Visual token pruning methods partially relieve this burden by removing part of the visual tokens, but they lose the removed information and still process the remaining image at every step. To measure how often the image is actually needed, we compare LLaDA-V's predictions with and without the image at every decoding step and find that removing the image changes a token being unmasked at only 22.8% of steps on average and at as few as 7.9%. We therefore propose LOWN, a decoding method that decides at every step whether to process the image and how many tokens to unmask. LOWN predicts the masked tokens without the image and processes the image only when this prediction disagrees with the last image-conditioned prediction. Agreement certifies the earlier prediction for reuse, and the number of certified tokens sets how many are unmasked in that step. We further observe that the need for the image differs across benchmarks, so LOWN's adaptive decision is needed rather than a fixed schedule. Without training or a tuned threshold, LOWN retains 99.6% of LLaDA-V's score on ten benchmarks at 35.3% of the decoding FLOPs on average. LOWN also generalizes across LLaDA-based DVLMs, composes orthogonally with visual token pruning, and runs under key-value caching for further efficiency gains. Code and project page are available at https://hyeon9698.github.io/LOWN/

Image tokenization plays a critical role in reducing the computational demands of modeling high-resolution images, significantly improving the efficiency of image and multimodal understanding and generation. Recent advances in 1D latent spaces have reduced the number of tokens required by eliminating the need for a 2D grid structure. In this paper, we further advance compact discrete image representation by introducing 1D binary image latents. By representing each image as a sequence of binary vectors, rather than using traditional one-hot codebook tokens, our approach preserves high-resolution details while maintaining the compactness of 1D latents. To the best of our knowledge, our text-to-image models are the first to achieve competitive performance in both diffusion and auto-regressive generation using just 128 discrete tokens for images up to 1024x1024, demonstrating up to a 32-fold reduction in token numbers compared to standard VQ-VAEs. The proposed 1D binary latent space, coupled with simple model architectures, achieves marked improvements in speed training and inference speed. Our text-to-image models allow for a global batch size of 4096 on a single GPU node with 8 AMD MI300X GPUs, and the training can be completed within 200 GPU days. Our models achieve competitive performance compared to modern image generation models without any in-house private training data or post-training refinements, offering a scalable and efficient alternative to conventional tokenization methods.

While Large Multimodal Models (LMMs) have made significant progress, they remain largely text-centric, relying on language as their core reasoning modality. As a result, they are limited in their ability to handle reasoning tasks that are predominantly visual. Recent approaches have sought to address this by supervising intermediate visual steps with helper images, depth maps, or image crops. However, these strategies impose restrictive priors on what "useful" visual abstractions look like, add heavy annotation costs, and struggle to generalize across tasks. To address this critical limitation, we propose a task-agnostic mechanism that trains LMMs to discover and use visual reasoning tokens without explicit supervision. These tokens attend globally and re-encode the image in a task-adaptive way, enabling the model to extract relevant visual information without hand-crafted supervision. Our approach outperforms direct fine-tuning and achieves state-of-the-art results on a diverse range of vision-centric tasks -- including those where intermediate abstractions are hard to specify -- while also generalizing to multi-task instruction tuning.

Recently, the tokens of images share the same static data flow in many dense networks. However, challenges arise from the variance among the objects in images, such as large variations in the spatial scale and difficulties of recognition for visual entities. In this paper, we propose a data-dependent token routing strategy to elaborate the routing paths of image tokens for Dynamic Vision Transformer, dubbed DiT. The proposed framework generates a data-dependent path per token, adapting to the object scales and visual discrimination of tokens. In feed-forward, the differentiable routing gates are designed to select the scaling paths and feature transformation paths for image tokens, leading to multi-path feature propagation. In this way, the impact of object scales and visual discrimination of image representation can be carefully tuned. Moreover, the computational cost can be further reduced by giving budget constraints to the routing gate and early-stopping of feature extraction. In experiments, our DiT achieves superior performance and favorable complexity/accuracy trade-offs than many SoTA methods on ImageNet classification, object detection, instance segmentation, and semantic segmentation. Particularly, the DiT-B5 obtains 84.8\% top-1 Acc on ImageNet with 10.3 GFLOPs, which is 1.0\% higher than that of the SoTA method with similar computational complexity. These extensive results demonstrate that DiT can serve as versatile backbones for various vision tasks.

Text-to-image diffusion models often struggle to achieve accurate semantic alignment between generated images and text prompts while maintaining efficiency for deployment on resource-constrained hardware. Existing approaches either incur substantial computational overhead through noise optimization or compromise semantic fidelity by aggressively pruning tokens. In this work, we propose OptiPrune, a unified framework that combines distribution-aware initial noise optimization with similarity-based token pruning to address both challenges simultaneously. Specifically, (1) we introduce a distribution-aware noise optimization module guided by attention scores to steer the initial latent noise toward semantically meaningful regions, mitigating issues such as subject neglect and feature entanglement; (2) we design a hardware-efficient token pruning strategy that selects representative base tokens via patch-wise similarity, injects randomness to enhance generalization, and recovers pruned tokens using maximum similarity copying before attention operations. Our method preserves the Gaussian prior during noise optimization and enables efficient inference without sacrificing alignment quality. Experiments on benchmark datasets, including Animal-Animal, demonstrate that OptiPrune achieves state-of-the-art prompt-image consistency with significantly reduced computational cost.

Current high-resolution vision-language models encode images as high-resolution image tokens and exhaustively take all these tokens to compute attention, which significantly increases the computational cost. To address this problem, we propose FlexAttention, a flexible attention mechanism for efficient high-resolution vision-language models. Specifically, a high-resolution image is encoded both as high-resolution tokens and low-resolution tokens, where only the low-resolution tokens and a few selected high-resolution tokens are utilized to calculate the attention map, which greatly shrinks the computational cost. The high-resolution tokens are selected via a high-resolution selection module which could retrieve tokens of relevant regions based on an input attention map. The selected high-resolution tokens are then concatenated to the low-resolution tokens and text tokens, and input to a hierarchical self-attention layer which produces an attention map that could be used for the next-step high-resolution token selection. The hierarchical self-attention process and high-resolution token selection process are performed iteratively for each attention layer. Experiments on multimodal benchmarks prove that our FlexAttention outperforms existing high-resolution VLMs (e.g., relatively ~9% in V* Bench, ~7% in TextVQA), while also significantly reducing the computational cost by nearly 40%.

Current vision systems typically assign fixed-length representations to images, regardless of the information content. This contrasts with human intelligence - and even large language models - which allocate varying representational capacities based on entropy, context and familiarity. Inspired by this, we propose an approach to learn variable-length token representations for 2D images. Our encoder-decoder architecture recursively processes 2D image tokens, distilling them into 1D latent tokens over multiple iterations of recurrent rollouts. Each iteration refines the 2D tokens, updates the existing 1D latent tokens, and adaptively increases representational capacity by adding new tokens. This enables compression of images into a variable number of tokens, ranging from 32 to 256. We validate our tokenizer using reconstruction loss and FID metrics, demonstrating that token count aligns with image entropy, familiarity and downstream task requirements. Recurrent token processing with increasing representational capacity in each iteration shows signs of token specialization, revealing potential for object / part discovery.

Existing approaches for improving the efficiency of Large Vision-Language Models (LVLMs) are largely based on the concept of visual token reduction. This approach, however, creates an information bottleneck that impairs performance, especially on challenging tasks that require fine-grained understanding and reasoning. In this work, we challenge this paradigm by introducing VISion On Request (VISOR), a method that reduces inference cost without discarding visual information. Instead of compressing the image, VISOR improves efficiency by sparsifying the interaction between image and text tokens. Specifically, the language model attends to the full set of high-resolution visual tokens through a small, strategically placed set of attention layers: general visual context is provided by efficient cross-attention between text-image, while a few well-placed and dynamically selected self-attention layers refine the visual representations themselves, enabling complex, high-resolution reasoning when needed. Based on this principle, we first train a single universal network on a range of computational budgets by varying the number of self-attention layers, and then introduce a lightweight policy mechanism that dynamically allocates visual computation based on per-sample complexity. Extensive experiments show that VISOR drastically reduces computational cost while matching or exceeding state-of-the-art results across a diverse suite of benchmarks, and excels in challenging tasks that require detailed visual understanding.

The representation of visual inputs of large vision-language models (LVLMs) usually involves substantially more tokens than that of textual inputs, leading to significant computational overhead. Several recent studies strive to mitigate this issue by either conducting token compression to prune redundant visual tokens or guiding them to bypass certain computational stages. While most existing work exploits token importance as the redundancy indicator, our study reveals that two largely neglected factors, namely, the diversity of retained visual tokens and their task relevance, often offer more robust criteria in token pruning. To this end, we design ToDRE, a two-stage and training-free token compression framework that achieves superior performance by pruning Tokens based on token Diversity and token-task RElevance. Instead of pruning redundant tokens, ToDRE introduces a greedy k-center algorithm to select and retain a small subset of diverse visual tokens after the vision encoder. Additionally, ToDRE addresses the "information migration" by further eliminating task-irrelevant visual tokens within the decoder of large language model (LLM). Extensive experiments show that ToDRE effectively reduces 90% of visual tokens after vision encoder and adaptively prunes all visual tokens within certain LLM's decoder layers, leading to a 2.6x speed-up in total inference time while maintaining 95.1% of model performance and excellent compatibility with efficient attention operators.

Image token removal is an efficient augmentation strategy for reducing the cost of computing image features. However, this efficient augmentation strategy has been found to adversely affect the accuracy of CLIP-based training. We hypothesize that removing a large portion of image tokens may improperly discard the semantic content associated with a given text description, thus constituting an incorrect pairing target in CLIP training. To address this issue, we propose an attentive token removal approach for CLIP training, which retains tokens with a high semantic correlation to the text description. The correlation scores are computed in an online fashion using the EMA version of the visual encoder. Our experiments show that the proposed attentive masking approach performs better than the previous method of random token removal for CLIP training. The approach also makes it efficient to apply multiple augmentation views to the image, as well as introducing instance contrastive learning tasks between these views into the CLIP framework. Compared to other CLIP improvements that combine different pre-training targets such as SLIP and MaskCLIP, our method is not only more effective, but also much more efficient. Specifically, using ViT-B and YFCC-15M dataset, our approach achieves 43.9% top-1 accuracy on ImageNet-1K zero-shot classification, as well as 62.7/42.1 and 38.0/23.2 I2T/T2I retrieval accuracy on Flickr30K and MS COCO, which are +1.1%, +5.5/+0.9, and +4.4/+1.3 higher than the SLIP method, while being 2.30times faster. An efficient version of our approach running 1.16times faster than the plain CLIP model achieves significant gains of +5.3%, +11.3/+8.0, and +9.5/+4.9 on these benchmarks.

Large Vision-Language Models (LVLMs) incur high computational costs due to significant redundancy in their visual tokens. To effectively reduce this cost, researchers have proposed various visual token pruning methods. However, existing methods are generally limited, either losing critical visual information prematurely due to pruning in the vision encoder, or leading to information redundancy among the selected tokens due to pruning in the Large Language Models (LLMs). To address these challenges, we propose a Visual and Textual Semantic Collaborative Pruning framework (ViTCoP) that combines redundancy filtering in the vision encoder with step-wise co-pruning within the LLM based on its hierarchical characteristics, to efficiently preserve critical and informationally diverse visual tokens. Meanwhile, to ensure compatibility with acceleration techniques like FlashAttention, we introduce the L2 norm of K-vectors as the token saliency metric in the LLM. Extensive experiments on various Large Vision-Language Models demonstrate that ViTCoP not only achieves state-of-the-art performance surpassing existing methods on both image and video understanding tasks, but also significantly reduces model inference latency and GPU memory consumption. Notably, its performance advantage over other methods becomes even more pronounced under extreme pruning rates.

Long video understanding remains challenging for Multi-modal Large Language Models (MLLMs) due to high memory costs and context-length limits. Prior approaches mitigate this by scoring and selecting frames/tokens within short clips, but they lack a principled mechanism to (i) compare relevance across distant video clips and (ii) stop processing once sufficient evidence has been gathered. We propose AdaptToken, a training-free framework that turns an MLLM's self-uncertainty into a global control signal for long-video token selection. AdaptToken splits a video into groups, extracts cross-modal attention to rank tokens within each group, and uses the model's response entropy to estimate each group's prompt relevance. This entropy signal enables a global token budget allocation across groups and further supports early stopping (AdaptToken-Lite), skipping the remaining groups when the model becomes sufficiently certain. Across four long-video benchmarks (VideoMME, LongVideoBench, LVBench, and MLVU) and multiple base MLLMs (7B-72B), AdaptToken consistently improves accuracy (e.g., +6.7 on average over Qwen2.5-VL 7B) and continues to benefit from extremely long inputs (up to 10K frames), while AdaptToken-Lite reduces inference time by about half with comparable performance. Project page: https://haozheqi.github.io/adapt-token

Ultra-high-resolution (UHR) remote sensing imagery couples kilometer-scale context with query-critical evidence that may occupy only a few pixels. Such vast spatial scale leads to a quadratic explosion of visual tokens and hinders the extraction of information from small objects. Previous works utilize direct downsampling, dense tiling, or global top-k pruning, which either compromise query-critical image details or incur unpredictable compute. In this paper, we propose UHR-BAT, a query-guided and region-faithful token compression framework to efficiently select visual tokens under a strict context budget. Specifically, we leverage text-guided, multi-scale importance estimation for visual tokens, effectively tackling the challenge of achieving precise yet low-cost feature extraction. Furthermore, by introducing region-wise preserve and merge strategies, we mitigate visual token redundancy, further driving down the computational budget. Experimental results show that UHR-BAT achieves state-of-the-art performance across various benchmarks. Code will be available at https://github.com/Yunkaidang/UHR.

We introduce QuadTok, a novel framework for visual tokenization and autoregressive image generation. Compared to traditional approaches using 2D grids or 1D token sequences, we propose a hierarchical quadtree structure, bridging the gap between 2D spatial binding and 1D sequence-level flexibility. The QuadTok tokenizer dynamically allocates representational capacity to visually intricate areas while leaving homogeneous regions at a coarse resolution. Compared with a fixed 256-token grid, our ImageNet-trained tokenizer saves approximately 10% of tokens on ImageNet and 9% when transferred zero-shot to the COCO dataset, while maintaining comparable reconstruction fidelity. Furthermore, the natural causality introduced by the tree structure seamlessly enables autoregressive image generation. Conditioned on a quadtree topology supplied before generation, our 947M GPT-style generative model achieves a 2.08 gFID on the ImageNet 256 times 256 benchmark. Additionally, leveraging the strong spatial correlation preserved by the quadtree structure, the QuadTok generator enables zero-shot spatially controlled image generation capabilities. Code: https://github.com/myc634/QuadTok.

Diffusion models have revolutionized generative tasks, especially in the domain of text-to-image synthesis; however, their iterative denoising process demands substantial computational resources. In this paper, we present a novel acceleration strategy that integrates token-level pruning with caching techniques to tackle this computational challenge. By employing noise relative magnitude, we identify significant token changes across denoising iterations. Additionally, we enhance token selection by incorporating spatial clustering and ensuring distributional balance. Our experiments demonstrate reveal a 50%-60% reduction in computational costs while preserving the performance of the model, thereby markedly increasing the efficiency of diffusion models. The code is available at https://github.com/ada-cheng/CAT-Pruning

In this work, we study the Efficient Multimodal Large Language Model. Redundant vision tokens consume a significant amount of computational memory and resources. Therefore, many previous works compress them in the Vision Projector to reduce the number of vision tokens. However, simply compressing in the Vision Projector can lead to the loss of visual information, especially for tasks that rely on fine-grained spatial relationships, such as OCR and Chart \& Table Understanding. To address this problem, we propose Vision Remember, which is inserted between the LLM decoder layers to allow vision tokens to re-memorize vision features. Specifically, we retain multi-level vision features and resample them with the vision tokens that have interacted with the text token. During the resampling process, each vision token only attends to a local region in vision features, which is referred to as saliency-enhancing local attention. Saliency-enhancing local attention not only improves computational efficiency but also captures more fine-grained contextual information and spatial relationships within the region. Comprehensive experiments on multiple visual understanding benchmarks validate the effectiveness of our method when combined with various Efficient Vision Projectors, showing performance gains without sacrificing efficiency. Based on Vision Remember, LLaVA-VR with only 2B parameters is also superior to previous representative MLLMs such as Tokenpacker-HD-7B and DeepSeek-VL-7B.

Vision-Language Models (VLMs) have achieved remarkable success in visual question answering tasks, but their reliance on large numbers of visual tokens introduces significant computational overhead. While existing efficient VLM approaches reduce visual tokens through fixed-ratio compression, they operate passively and lack the ability to adapt to varying task requirements. This motivates a fundamental question: Can VLMs autonomously determine the minimum number of visual tokens required for each sample? Inspired by human active vision mechanisms, we introduce AdaptVision, an efficient VLM paradigm that enables adaptive visual token acquisition through a coarse-to-fine approach. Our model initially processes compressed visual tokens from low-resolution images and selectively acquires additional visual information by invoking a bounding box tool to crop key regions when necessary. We train AdaptVision using a reinforcement learning framework that carefully balances accuracy and efficiency. Central to our approach is Decoupled Turn Policy Optimization (DTPO), which decouples the learning objective into two components: (1) tool learning, which optimizes correct tool utilization, and (2) accuracy improvement, which refines the generated responses to improve answer correctness. Based on this formulation, we further decouple advantage estimation by computing separate advantages for tokens associated with each objective. This formulation enables more effective optimization for AdaptVision compared to vanilla GRPO. Comprehensive experiments across multiple VQA benchmarks demonstrate that AdaptVision achieves superior performance while consuming substantially fewer visual tokens than state-of-the-art efficient VLM methods.

Vision-language models face a fundamental scaling bottleneck: the number of visual tokens grows with both temporal duration and spatial resolution, making long-video understanding expensive for the vision encoder and the language model. Existing methods often compress visual tokens after dense encoding, creating a mismatch between the representation used during training and the compact interface required at deployment. We present CoVisco, a codec-native vision encoder with native token compression for unified image-video understanding. By combining codec-native input support with segmented attention, CoVisco can encode long visual inputs in a single forward pass without forming dense patch-to-patch interactions across all frames. Each temporal segment is equipped with learnable abstract tokens that learn a compact segment-level representation, while fine-grained patch tokens remain available throughout the encoder. Alternating intra-segment and abstract-communication layers preserve video-level context through the abstract-token channel. A lightweight selector further exposes either abstract tokens alone or abstract tokens augmented with a runtime-selected subset of patch tokens, yielding a compact visual interface that reduces the visual context and prefill burden of downstream MLLMs while retaining fine-grained evidence when needed. Pretrained with contrastive objectives on 565M image--text pairs and 6.4M videos, CoVisco shows competitive performance on video-oriented embedding and multimodal understanding benchmarks. In the evaluated four-segment, 64-frame setting, abstract-only inference uses only 400 visual tokens while achieving video-understanding performance close to, and on some benchmarks exceeding, OneVision-Encoder. Selected patch tokens further improve fine-grained video reasoning. Project URL: https://github.com/ernie-research/CoVisco.git