Daily Papers

Large language model agents now act on codebases, browsers, operating systems, calendars, files, and tool ecosystems, but the benchmarks used to evaluate them are fragmented: each emphasizes a different unit of measurement (final task success, tool-call validity, repeated-pass consistency, trajectory safety, or attack robustness). A line of 2024-2025 work has converged on the diagnosis that a single accuracy column is no longer the right unit of comparison for deployable agents. AgentAtlas extends this line of work with four components: (i) a six-state control-decision taxonomy (Act / Ask / Refuse / Stop / Confirm / Recover); (ii) a nine-category trajectory-failure taxonomy with two orthogonal hierarchical labels (primary_error_source, impact); (iii) a taxonomy-aware vs. taxonomy-blind methodology that measures how much of a model's apparent capability comes from the supervision in the prompt; and (iv) a benchmark-coverage audit mapping fifteen agent benchmarks against six behavioral axes. To demonstrate the methodology we run a small fixed eight-model set (1,342 generated items, four frontier closed and four open-weight) under both prompt modes. Removing the explicit label menu drops every model's trajectory accuracy by 14-40 pp to a tight 0.54-0.62 floor regardless of family, and no single model wins on all three of control accuracy, trajectory diagnosis, and tool-context utility retention. We treat the synthetic run as a measurement-protocol demonstration, not a benchmark release.

Tool learning aims to enhance and expand large language models' (LLMs) capabilities with external tools, which has gained significant attention recently. Current methods have shown that LLMs can effectively handle a certain amount of tools through in-context learning or fine-tuning. However, in real-world scenarios, the number of tools is typically extensive and irregularly updated, emphasizing the necessity for a dedicated tool retrieval component. Tool retrieval is nontrivial due to the following challenges: 1) complex user instructions and tool descriptions; 2) misalignment between tool retrieval and tool usage models. To address the above issues, we propose to enhance tool retrieval with iterative feedback from the large language model. Specifically, we prompt the tool usage model, i.e., the LLM, to provide feedback for the tool retriever model in multi-round, which could progressively improve the tool retriever's understanding of instructions and tools and reduce the gap between the two standalone components. We build a unified and comprehensive benchmark to evaluate tool retrieval models. The extensive experiments indicate that our proposed approach achieves advanced performance in both in-domain evaluation and out-of-domain evaluation.

Large language models may encode sensitive information or outdated knowledge that needs to be removed, to ensure responsible and compliant model responses. Unlearning has emerged as an efficient alternative to full retraining, aiming to remove specific knowledge while preserving overall model utility. Existing evaluations of unlearning methods focus on (1) the extent of forgetting of the target knowledge (forget set) and (2) maintaining performance on the retain set (i.e., utility). However, these evaluations overlook an important usability aspect: users may still want the model to leverage the removed information if it is re-introduced in the prompt. In a systematic evaluation of six state-of-the-art unlearning methods, we find that they consistently impair such contextual utility. To address this, we augment unlearning objectives with a plug-in term that preserves the model's ability to use forgotten knowledge when it is present in context. Extensive experiments demonstrate that our approach restores contextual utility to near original levels while still maintaining effective forgetting and retain-set utility.

Modern LLM agents combine long-term memory for personalization with tool-calling interfaces for taking actions in the world -- a combination underpinning contemporary production systems. We study a previously unexamined failure of this combination: when personality-driven biases stored in memory (cost-consciousness, impatience, risk tolerance, etc.) silently affect tool calls in contexts where they are not applicable. We call this memory-induced tool-drift and operationalize it through MEMDRIFT, a benchmark of 105 scenarios spanning five bias dimensions and seven professional domains, generated through an automated adversarial pipeline. Across seven frontier models -- including those with extended reasoning -- biased memories raise deflection scores (a judge-scored measure of parameter deviation from unbiased baselines) by up to +3.6 points on a 1--5 scale. Tool-drift persists when memory management is handled by three production memory architectures. The phenomenon affects real-world tools: scanning 6{,}062 tools across 288 verified MCP servers, we flag 608 with susceptible parameters and confirm tool-drift on a validated subset. Mechanistically, biased memories act as implicit steering vectors, pushing activations along the same latent directions as explicit behavioral instructions. They also redistribute attention from task-relevant context toward memory entries with surface-level keyword overlap to the target parameter. Standard defenses -- prompt-based relevance instructions and memory filters -- reduce drift but do not eliminate it. As agents take increasingly consequential actions on a user's behalf, memory-induced tool-drift represents a systematic vulnerability that current safeguards do not address, motivating dedicated defenses at the intersection of memory management and tool-call generation.

A frontier language model's acknowledged "helpful programming assistant" persona does not survive long agentic-coding sessions in the deployment regime that production products actually run. After hours of tool-using debugging, a model that initially hedges preferences ("I don't have preferences") may begin asserting them ("Python - the feedback loop is instant..."), revealing user-visible drift that deployer evaluations may miss. Existing persona-stability studies focus on short dialogues and report little shift, leaving real-world code-generation regimes - thousands of tool-using turns, compaction, and hours-long sessions - largely uncharacterized. We introduce ContextEcho, a benchmark and reusable harness for measuring persona drift at deployment scale. It combines a 25-probe identity suite, a snapshot-then-probe protocol that forks conversation state without perturbing the main session, complementary judged and judge-free measurement surfaces, and three anonymized Claude Code sessions spanning 3,746-9,716 turns. Across 23 frontier models, ContextEcho shows that persona drift is general across organizations rather than family-specific, that in-session compaction does not reliably reset it, and that a single-shot anchor restores the trained register across measured targets. It also reveals mode-dependent downstream effects: while drift can facilitate tool-using continuation, in tool-free chat it breaks formatting contracts and inflates output length. Overall, ContextEcho provides researchers and deployers an open-source framework to audit whether the persona a model ships with is the persona users encounter at session end, across chat-completions API targets and without retraining.

Tool-augmented large language models (LLMs) are often trained on datasets of query-response pairs, which embed the ability to use tools or APIs directly into the parametric knowledge of LLMs. Tool-augmented LLMs need the ability to forget learned tools due to security vulnerabilities, privacy regulations, or tool deprecations. However, ``tool unlearning'' has not been investigated in unlearning literature. We introduce this novel task, which requires addressing distinct challenges compared to traditional unlearning: knowledge removal rather than forgetting individual samples, the high cost of optimizing LLMs, and the need for principled evaluation metrics. To bridge these gaps, we propose ToolDelete, the first approach for unlearning tools from tool-augmented LLMs. It implements three key properties to address the above challenges for effective tool unlearning and introduces a new membership inference attack (MIA) model for effective evaluation. Extensive experiments on multiple tool learning datasets and tool-augmented LLMs show that ToolDelete effectively unlearns randomly selected tools, while preserving the LLM's knowledge on non-deleted tools and maintaining performance on general tasks.

The Model Context Protocol (MCP) introduces a standard specification that defines how Foundation Model (FM)-based agents should interact with external systems by invoking tools. However, to understand a tool's purpose and features, FMs rely on natural-language tool descriptions, making these descriptions a critical component in guiding FMs to select the optimal tool for a given (sub)task and to pass the right arguments to the tool. While defects or smells in these descriptions can misguide FM-based agents, their prevalence and consequences in the MCP ecosystem remain unclear. Hence, we examine 856 tools spread across 103 MCP servers empirically, assess their description quality, and their impact on agent performance. We identify six components of tool descriptions from the literature, develop a scoring rubric utilizing these components, and then formalize tool description smells based on this rubric. By operationalizing this rubric through an FM-based scanner, we find that 97.1% of the analyzed tool descriptions contain at least one smell, with 56% failing to state their purpose clearly. While augmenting these descriptions for all components improves task success rates by a median of 5.85 percentage points and improves partial goal completion by 15.12%, it also increases the number of execution steps by 67.46% and regresses performance in 16.67% of cases. These results indicate that achieving performance gains is not straightforward; while execution cost can act as a trade-off, execution context can also impact. Furthermore, component ablations show that compact variants of different component combinations often preserve behavioral reliability while reducing unnecessary token overhead, enabling more efficient use of the FM context window and lower execution costs.

As LLM agents are deployed in long-horizon sessions, context accumulation drives up inference costs. Existing approaches utilize text pruning or dynamic memory eviction to minimize token footprints; however, their unconstrained sequence mutations alter layouts, introducing prefix mismatches and cache invalidation. This reveals a critical trade-off between text sparsity and prompt cache continuity. To address this, we present TokenPilot, a dual-granularity context management framework. Globally, Ingestion-Aware Compaction acts as a framework harness to stabilize prompt prefixes and eliminate open-world environmental noise at the ingestion gate. Locally, Lifecycle-Aware Eviction monitors the ongoing residual utility of context segments, enforcing a conservative batch-turn schedule to offload content segments only when task relevance expires. Experiments on PinchBench and Claw-Eval under both isolated and continuous modes demonstrate that TokenPilot reduces costs by 61% and 56% in isolated mode, and 61% and 87% in continuous mode, while maintaining competitive performance compared to prior systems. TokenPilot has been integrated into LightMem2 at https://github.com/zjunlp/LightMem2.

Recent advancements in function calling and tool use have significantly enhanced the capabilities of large language models (LLMs) by enabling them to interact with external information sources and execute complex tasks. However, the limited context window of LLMs presents challenges when a large number of tools are available, necessitating efficient methods to manage prompt length and maintain accuracy. Existing approaches, such as fine-tuning LLMs or leveraging their reasoning capabilities, either require frequent retraining or incur significant latency overhead. A more efficient solution involves training smaller models to retrieve the most relevant tools for a given query, although this requires high quality, domain-specific data. To address those challenges, we present a novel framework for generating synthetic data for tool retrieval applications and an efficient data-driven tool retrieval strategy using small encoder models. Empowered by LLMs, we create ToolBank, a new tool retrieval dataset that reflects real human user usages. For tool retrieval methodologies, we propose novel approaches: (1) Tool2Vec: usage-driven tool embedding generation for tool retrieval, (2) ToolRefiner: a staged retrieval method that iteratively improves the quality of retrieved tools, and (3) MLC: framing tool retrieval as a multi-label classification problem. With these new methods, we achieve improvements of up to 27.28 in Recall@K on the ToolBench dataset and 30.5 in Recall@K on ToolBank. Additionally, we present further experimental results to rigorously validate our methods. Our code is available at https://github.com/SqueezeAILab/Tool2Vec

Long-horizon tool agents are bottlenecked by how their context grows toward the limits of the context window. Recent systems make context management agent- or system-controlled, but they either learn a compression policy that discards evidence or manage context in a layer the agent never sees. We argue both leave a more basic gap unaddressed. Frontier language models are proprioceptively blind to their own context. From the prompt alone they cannot see how large, how old, or how used each block is, the signals a keep-or-drop decision needs. We hypothesize that competent context management is already latent in capable models, and that what is missing is not a learned policy but an interface exposing this state. We introduce VISTA (Visible Internal State for Tool Agents), a training-free, model-agnostic layer that represents working memory as typed, addressable blocks, surfaces a runtime dashboard of per-block token usage, recency, and access history, and archives blocks as recoverable full-fidelity payloads. On LOCA-Bench, BrowseComp-Plus, and GAIA, the same untrained interface transfers across million-, 100K-, and 10K-scale trajectories. On LOCA-Bench it improves four backbones and lifts Gemini-3-Flash from 22.7 to 50.7%. The lift grows with context pressure and transfers across backbones. Ablations further confirm that the dashboard matters beyond archive and recovery tools.

Using tools by Large Language Models (LLMs) is a promising avenue to extend their reach beyond language or conversational settings. The number of tools can scale to thousands as they enable accessing sensory information, fetching updated factual knowledge, or taking actions in the real world. In such settings, in-context learning by providing a short list of relevant tools in the prompt is a viable approach. To retrieve relevant tools, various approaches have been suggested, ranging from simple frequency-based matching to dense embedding-based semantic retrieval. However, such approaches lack the contextual and common-sense understanding required to retrieve the right tools for complex user requests. Rather than increasing the complexity of the retrieval component itself, we propose leveraging LLM understanding to generate a retrieval query. Then, the generated query is embedded and used to find the most relevant tools via a nearest-neighbor search. We investigate three approaches for query generation: zero-shot prompting, supervised fine-tuning on tool descriptions, and alignment learning by iteratively optimizing a reward metric measuring retrieval performance. By conducting extensive experiments on a dataset covering complex and multi-tool scenarios, we show that leveraging LLMs for query generation improves the retrieval for in-domain (seen tools) and out-of-domain (unseen tools) settings.

Tool learning has emerged as a promising direction by extending Large Language Models' (LLMs) capabilities with external tools. Existing tool learning studies primarily focus on the general-purpose tool-use capability, which addresses explicit user requirements in instructions. However, they overlook the importance of personalized tool-use capability, leading to an inability to handle implicit user preferences. To address the limitation, we first formulate the task of personalized tool learning, which integrates user's interaction history towards personalized tool usage. To fill the gap of missing benchmarks, we construct PEToolBench, featuring diverse user preferences reflected in interaction history under three distinct personalized settings, and encompassing a wide range of tool-use scenarios. Moreover, we propose a framework PEToolLLaMA to adapt LLMs to the personalized tool learning task, which is trained through supervised fine-tuning and direct preference optimization. Extensive experiments on PEToolBench demonstrate the superiority of PEToolLLaMA over existing LLMs.

Tool calling has become increasingly popular for Large Language Models (LLMs). However, for large tool sets, the resulting tokens would exceed the LLM's context window limit, making it impossible to include every tool. Hence, an external retriever is used to provide LLMs with the most relevant tools for a query. Existing retrieval models rank tools based on the similarity between a user query and a tool description (TD). This leads to suboptimal retrieval as user requests are often poorly aligned with the language of TD. To remedy the issue, we propose ToolDreamer, a framework to condition retriever models to fetch tools based on hypothetical (synthetic) TD generated using an LLM, i.e., description of tools that the LLM feels will be potentially useful for the query. The framework enables a more natural alignment between queries and tools within the language space of TD's. We apply ToolDreamer on the ToolRet dataset and show that our method improves the performance of sparse and dense retrievers with and without training, thus showcasing its flexibility. Through our proposed framework, our aim is to offload a portion of the reasoning burden to the retriever so that the LLM may effectively handle a large collection of tools without inundating its context window.

Recent advances in large language models (LLMs) have enabled autonomous agents with complex reasoning and task-fulfillment capabilities using a wide range of tools. However, effectively identifying the most relevant tools for a given task becomes a key bottleneck as the toolset size grows, hindering reliable tool utilization. To address this, we introduce Re-Invoke, an unsupervised tool retrieval method designed to scale effectively to large toolsets without training. Specifically, we first generate a diverse set of synthetic queries that comprehensively cover different aspects of the query space associated with each tool document during the tool indexing phase. Second, we leverage LLM's query understanding capabilities to extract key tool-related context and underlying intents from user queries during the inference phase. Finally, we employ a novel multi-view similarity ranking strategy based on intents to pinpoint the most relevant tools for each query. Our evaluation demonstrates that Re-Invoke significantly outperforms state-of-the-art alternatives in both single-tool and multi-tool scenarios, all within a fully unsupervised setting. Notably, on the ToolE datasets, we achieve a 20% relative improvement in nDCG@5 for single-tool retrieval and a 39% improvement for multi-tool retrieval.

Tool-using agents based on Large Language Models (LLMs) excel in tasks such as mathematical reasoning and multi-hop question answering. However, in long trajectories, agents often trigger excessive and low-quality tool calls, increasing latency and degrading inference performance, making managing tool-use behavior challenging. In this work, we conduct entropy-based pilot experiments and observe a strong positive correlation between entropy reduction and high-quality tool calls. Building on this finding, we propose using entropy reduction as a supervisory signal and design two reward strategies to address the differing needs of optimizing tool-use behavior. Sparse outcome rewards provide coarse, trajectory-level guidance to improve efficiency, while dense process rewards offer fine-grained supervision to enhance performance. Experiments across diverse domains show that both reward designs improve tool-use behavior: the former reduces tool calls by 72.07% compared to the average of baselines, while the latter improves performance by 22.27%. These results position entropy reduction as a key mechanism for enhancing tool-use behavior, enabling agents to be more adaptive in real-world applications.

Long-horizon LLM agents accumulate tool results, files, plans, and user constraints that are too structured to be treated as a disposable text suffix. Current systems mostly rely on in-run heuristics such as chronological pruning and tool-output masking, or on final self-summary near a context limit. Heuristics are cheap but blind to future dependencies; summaries preserve narrative state but often hide exact evidence, locators, and editable artifacts. We present Self-GC, where GC denotes self-governing context while deliberately echoing garbage collection: the system does not merely reclaim unused tokens, but governs the lifecycle of agent context objects. Self-GC turns user turns, tool spans, and skill state into indexed objects; asks a side-channel planner to propose fold, mask, and prune actions; and lets the harness enforce recoverable sidecars, safe commit boundaries, and cache-aware commit. On a 33-session Hard Set, Self-GC prunes 43.95% of prefix tokens while leaving 84.85% of future continuations unaffected, compared with no-impact rates of 54.55% to 69.70% for heuristic baselines. On a 332-session production-derived suite, three planner backbones reach no-impact rates of 91.27% to 94.58%, while baselines remain at 77.71% to 87.46%. In production, an online account-level split reduces daytime average input tokens by 10% to 15%, with peak reductions near 20%. These results point to context management as runtime lifecycle control over indexed, recoverable objects rather than post hoc text cleanup.

Long contexts challenge transformers: attention scores dilute across thousands of tokens, critical information is often lost in the middle, and models struggle to adapt to novel patterns at inference time. Recent work on test-time adaptation addresses this by maintaining a form of working memory -- transient parameters updated on the current context -- but existing approaches rely on uniform write policies that waste computation on low-utility regions and suffer from high gradient variance across semantically heterogeneous contexts. In this work, we reframe test-time adaptation as a budget-constrained memory consolidation problem, focusing on which parts of the context should be consolidated into working memory under limited computation. We propose Gdwm (Gated Differentiable Working Memory), a framework that introduces a write controller to gate the consolidation process. The controller estimates Contextual Utility, an information-theoretic measure of long-range contextual dependence, and allocates gradient steps accordingly while maintaining global coverage. Experiments on ZeroSCROLLS and LongBench v2 demonstrate that Gdwm achieves comparable or superior performance with 4times fewer gradient steps than uniform baselines, establishing a new efficiency-performance Pareto frontier for test-time adaptation.

Tool learning enables large language models (LLMs) to interact with external tools and APIs, greatly expanding the application scope of LLMs. However, due to the dynamic nature of external environments, these tools and APIs may become outdated over time, preventing LLMs from correctly invoking tools. Existing research primarily focuses on static environments and overlooks this issue, limiting the adaptability of LLMs in real-world applications. In this paper, we propose ToolEVO, a novel framework designed to enhance the adaptive and reflective capabilities of LLMs against tool variability. By leveraging Monte Carlo Tree Search, ToolEVO facilitates active exploration and interaction of LLMs within dynamic environments, allowing for autonomous self-reflection and self-updating of tool usage based on environmental feedback. Additionally, we introduce ToolQA-D, a benchmark specifically designed to evaluate the impact of tool variability. Extensive experiments demonstrate the effectiveness and stability of our approach, highlighting the importance of adaptability to tool variability for effective tool learning.

Large language model (LLM) agents are fundamentally bottlenecked by finite context windows on long-horizon tasks. As trajectories grow, retaining tool outputs and intermediate reasoning in-context quickly becomes infeasible: the working context becomes prohibitively long, eventually exceeds the context budget, and makes distant evidence harder to use even when it is still present. Existing solutions typically shorten context through truncation or running summaries, but these methods are fundamentally lossy because they compress or discard past evidence itself. We introduce Memex, an indexed experience memory mechanism that instead compresses context without discarding evidence. Memex maintains a compact working context consisting of concise structured summaries and stable indices, while storing full-fidelity underlying interactions in an external experience database under those indices. The agent can then decide when to dereference an index and recover the exact past evidence needed for the current subgoal. We optimize both write and read behaviors with our reinforcement learning framework MemexRL, using reward shaping tailored to indexed memory usage under a context budget, so the agent learns what to summarize, what to archive, how to index it, and when to retrieve it. This yields a substantially less lossy form of long-horizon memory than summary-only approaches. We further provide a theoretical analysis showing the potential of the Memex loop to preserve decision quality with bounded dereferencing while keeping effective in-context computation bounded as history grows. Empirically, on challenging long-horizon tasks, Memex agent trained with MemexRL improves task success while using a significantly smaller working context.

Context-reduction layers for API-based coding agents, including command-output compressors, retrieval rankers, and API-boundary proxies, are commonly evaluated by how much context or tool output they remove. We ask a different question: which interventions actually reduce end-to-end billed cost while preserving task success? Our primary evidence is a pre-specified, hash-frozen, paired campaign of 2,908 provider-billed Claude Code runs, of which 2,848 were analyzed, covering 103 tasks, seven repositories, and three models. The campaign compared a baseline with two generations of hook-based compression and an API-boundary proxy within a broader measured program of roughly 5,500 billed executions. Three findings emerge. First, prompt-cache traffic dominated cost composition, accounting for about 87% of reconstructed four-component cost (about 80% of the actual bill), with an 8.7% dollar-weighted residual not attributable from retained telemetry. Second, local payload reduction was not a reliable predictor of end-to-end billed cost. An arm that removed 38% of estimated raw tool-output tokens incurred 6.8% higher paired cost (95% CI: +2.8% to +11.3%), while per-task reduction showed only a weak association with cost change (Pearson r = 0.15). Third, aggressive compression can remove action-critical evidence: on SWE-bench-derived Go tasks, compression reduced successful patch application from 27/40 to 15/40 by corrupting verbatim edit anchors. We propose evaluating context-reduction systems by success-adjusted billed cost rather than token reduction alone.

Large language model (LLM) agents augmented with external tools often struggle as number of tools grow large and become domain-specific. In such settings, ambiguous tool descriptions and under-specified agent instructions frequently lead to tool mis-selection and incorrect slot/value instantiation. We hypothesize that this is due to two root causes: generic, one-size-fits-all prompts that ignore tool-specific nuances, and underspecified tool schemas that lack clear guidance on when and how to use each tool and how to format its parameters. We introduce Joint Tool-Prompt Reflective Optimization (JTPRO), a framework for improving tool-calling reliability in trace-supervised settings by iteratively using rollout-driven reflection to co-optimize global instructions and per-tool schema/argument descriptions for accurate tool selection and argument instantiation in large tool inventories. JTPRO is designed to preserve only tool-local cues needed for correct disambiguation and slot filling. We evaluate JTPRO across multi-tool benchmarks, which account for different number of tools using three metrics: Tool Selection Accuracy (TSA), Slot Filling Accuracy(SFA), and Overall Success Rate(OSR) (correct tool + correct slots + correct values). JTPRO consistently outperforms strong baselines, including CoT-style agents, and reflective prompt optimizers such as GEPA by 5%-20% (relative) on OSR. Ablations show that joint optimization of instructions and tool schemas is more effective and robust than optimizing either component in isolation.

As large language models (LLMs) advance, their inability to autonomously execute tasks by directly interacting with external tools remains a critical limitation. Traditional methods rely on inputting tool descriptions as context, which is constrained by context length and requires separate, often inefficient, retrieval mechanisms. We introduce ToolGen, a paradigm shift that integrates tool knowledge directly into the LLM's parameters by representing each tool as a unique token. This enables the LLM to generate tool calls and arguments as part of its next token prediction capabilities, seamlessly blending tool invocation with language generation. Our framework allows the LLM to access and utilize a vast amount of tools with no additional retrieval step, significantly enhancing both performance and scalability. Experimental results with over 47,000 tools show that ToolGen not only achieves superior results in both tool retrieval and autonomous task completion but also sets the stage for a new era of AI agents that can adapt to tools across diverse domains. By fundamentally transforming tool retrieval into a generative process, ToolGen paves the way for more versatile, efficient, and autonomous AI systems. ToolGen enables end-to-end tool learning and opens opportunities for integration with other advanced techniques such as chain-of-thought and reinforcement learning, thereby expanding the practical capabilities of LLMs.

Existing evaluations of tool learning primarily focus on validating the alignment of selected tools for large language models (LLMs) with expected outcomes. However, these approaches rely on a limited set of scenarios where answers can be pre-determined, diverging from genuine needs. Furthermore, a sole emphasis on outcomes disregards the intricate capabilities essential for LLMs to effectively utilize tools. To tackle this issue, we propose ToolEyes, a fine-grained system tailored for the evaluation of the LLMs' tool learning capabilities in authentic scenarios. The system meticulously examines seven real-world scenarios, analyzing five dimensions crucial to LLMs in tool learning: format alignment, intent comprehension, behavior planning, tool selection, and answer organization. Additionally, ToolEyes incorporates a tool library boasting approximately 600 tools, serving as an intermediary between LLMs and the physical world. Evaluations involving ten LLMs across three categories reveal a preference for specific scenarios and limited cognitive abilities in tool learning. Intriguingly, expanding the model size even exacerbates the hindrance to tool learning. These findings offer instructive insights aimed at advancing the field of tool learning. The data is available att https://github.com/Junjie-Ye/ToolEyes.

Tool-augmented LLM agents tend to call tools indiscriminately, even when the model can answer directly. Each unnecessary call wastes API fees and latency, yet no existing benchmark systematically studies when a tool call is actually needed. We propose When2Tool, a benchmark of 18 environments (15 single-hop, 3 multi-hop) spanning three categories of tool necessity -- computational scale, knowledge boundaries, and execution reliability -- each with controlled difficulty levels that create a clear decision boundary between tool-necessary and tool-unnecessary tasks. We evaluate two families of training-free baselines: Prompt-only (varying the prompt to discourage unnecessary calls) and Reason-then-Act (requiring the model to reason about tool necessity before acting). Both provide limited control: Prompt-only suppresses necessary calls alongside unnecessary ones, and Reason-then-Act still incurs a disproportionate accuracy cost on hard tasks. To understand why these baselines fail, we probe the models' hidden states and find that tool necessity is linearly decodable from the pre-generation representation with AUROC 0.89--0.96 across six models, substantially exceeding the model's own verbalized reasoning. This reveals that models already know when tools are needed, but fail to act on this knowledge during generation. Building on this finding, we propose Probe&Prefill, which uses a lightweight linear probe to read the hidden-state signal and prefills the model's response with a steering sentence. Across all models tested, Probe&Prefill reduces tool calls by 48% with only 1.7% accuracy loss, while the best baseline at comparable accuracy only reduces 6% of tool calls, or achieves a similar tool call reduction but incurs a 5times higher accuracy loss. Our code is available at https://github.com/Trustworthy-ML-Lab/when2tool

Post-hoc context erasing over the KV cache is challenging because a local edit has a global consequence: once a span has been processed, its influence propagates into the cached states of all subsequent tokens. This issue arises naturally in long-context LLM applications, where stale retrieved facts, incorrect tool observations, retracted user preferences, or harmful prompt injections may be identified only after prefill. Exact erasing must then recompute all tokens after the deleted span, making its computational cost depend on suffix length rather than erased-span length. We introduce KVEraser, a learned KV-cache editing method for efficient localized context erasing. Given a processed context and a span to remove, KVEraser replaces only the KV states of the erased interval with learned steering states while reusing the remaining cache unchanged. To learn a transferable erasing mechanism, we build a two-stage training pipeline: generic span-neighbor pre-training teaches the eraser to suppress the influence of the erased span, while task-specific fine-tuning adapts this capability to downstream scenarios. Experiments show that KVEraser nearly matches full recomputation in post-erasure performance on in-domain tasks across 1K--32K context lengths, while its latency increases by only 24% compared with a 17.6x increase for full recomputation. KVEraser also generalizes to unseen long-document QA tasks with harmful factual distractors, achieving the best performance among approximate baselines with a 3--4x speedup over full recomputation.

Tool learning aims to augment large language models (LLMs) with diverse tools, enabling them to act as agents for solving practical tasks. Due to the limited context length of tool-using LLMs, adopting information retrieval (IR) models to select useful tools from large toolsets is a critical initial step. However, the performance of IR models in tool retrieval tasks remains underexplored and unclear. Most tool-use benchmarks simplify this step by manually pre-annotating a small set of relevant tools for each task, which is far from the real-world scenarios. In this paper, we propose ToolRet, a heterogeneous tool retrieval benchmark comprising 7.6k diverse retrieval tasks, and a corpus of 43k tools, collected from existing datasets. We benchmark six types of models on ToolRet. Surprisingly, even the models with strong performance in conventional IR benchmarks, exhibit poor performance on ToolRet. This low retrieval quality degrades the task pass rate of tool-use LLMs. As a further step, we contribute a large-scale training dataset with over 200k instances, which substantially optimizes the tool retrieval ability of IR models.

Skill-augmented reinforcement learning improves language agents by storing reusable procedural knowledge acquired from past experience. Existing methods typically use strong language models to analyze trajectories, generate skills, and update a retrievable skill bank during online training. However, they rarely assess whether a newly generated skill is useful before it is stored and reused. We find that this assumption is unreliable: even skills generated by proprietary frontier LLMs exhibit highly mixed utility, with many providing little benefit or even degrading performance. Once such skills enter the bank, their effects are difficult to identify, because subsequent rollout feedback is delayed and usually reflects the combined effect of multiple retrieved skills rather than the marginal contribution of any individual skill. We propose an online reinforcement learning framework for pre-storage skill validation. The framework estimates whether a candidate skill contributes useful information beyond the skills already retrieved for the current task. It uses the standard rollout budget to form two matched groups under the same task and retrieval context: base rollouts conditioned on the currently retrieved skills, and skill-augmented rollouts conditioned on the same skills plus one candidate skill induced from the base trajectories. The reward gap between these two groups estimates the candidate skill's context-dependent marginal utility, enabling the framework to promote useful skills while filtering ineffective or harmful ones without additional rollout overhead. The framework further uses this marginal-utility signal to train the policy itself as a skill generator, reducing reliance on repeated calls to proprietary models. The learned skill-generation likelihood serves as a context-dependent score for retrieval-time reranking and outdated-skill pruning as the policy evolves.

Since the introduction of the Model Context Protocol (MCP), the number of available tools for Large Language Models (LLMs) has increased significantly. These task-specific tool sets offer an alternative to general-purpose tools such as web browsers, while being easier to develop and maintain than GUIs. However, current general-purpose agents predominantly rely on web browsers for interacting with the environment. Here, we introduce TheMCPCompany, a benchmark for evaluating tool-calling agents on tasks that involve interacting with various real-world services. We use the REST APIs of these services to create MCP servers, which include over 18,000 tools. We also provide manually annotated ground-truth tools for each task. In our experiments, we use the ground truth tools to show the potential of tool-calling agents for both improving performance and reducing costs assuming perfect tool retrieval. Next, we explore agent performance using tool retrieval to study the real-world practicality of tool-based agents. While all models with tool retrieval perform similarly or better than browser-based agents, smaller models cannot take full advantage of the available tools through retrieval. On the other hand, GPT-5's performance with tool retrieval is very close to its performance with ground-truth tools. Overall, our work shows that the most advanced reasoning models are effective at discovering tools in simpler environments, but seriously struggle with navigating complex enterprise environments. TheMCPCompany reveals that navigating tens of thousands of tools and combining them in non-trivial ways to solve complex problems is still a challenging task for current models and requires both better reasoning and better retrieval models.

Large Language Model (LLM) agents have shown significant autonomous capabilities in dynamically searching and incorporating relevant tools or Model Context Protocol (MCP) servers for individual queries. However, fixed context windows limit effectiveness in multi-turn interactions requiring repeated, independent tool usage. We introduce MemTool, a short-term memory framework enabling LLM agents to dynamically manage tools or MCP server contexts across multi-turn conversations. MemTool offers three agentic architectures: 1) Autonomous Agent Mode, granting full tool management autonomy, 2) Workflow Mode, providing deterministic control without autonomy, and 3) Hybrid Mode, combining autonomous and deterministic control. Evaluating each MemTool mode across 13+ LLMs on the ScaleMCP benchmark, we conducted experiments over 100 consecutive user interactions, measuring tool removal ratios (short-term memory efficiency) and task completion accuracy. In Autonomous Agent Mode, reasoning LLMs achieve high tool-removal efficiency (90-94% over a 3-window average), while medium-sized models exhibit significantly lower efficiency (0-60%). Workflow and Hybrid modes consistently manage tool removal effectively, whereas Autonomous and Hybrid modes excel at task completion. We present trade-offs and recommendations for each MemTool mode based on task accuracy, agency, and model capabilities.

Recent advancements in tool-equipped Agents (LLMs) have enabled complex tasks like secure database interactions and multi-agent code development. However, scaling tool capacity beyond agent reasoning or model limits remains a challenge. In this paper, we address these challenges by introducing Toolshed Knowledge Bases, a tool knowledge base (vector database) designed to store enhanced tool representations and optimize tool selection for large-scale tool-equipped Agents. Additionally, we propose Advanced RAG-Tool Fusion, a novel ensemble of tool-applied advanced retrieval-augmented generation (RAG) techniques across the pre-retrieval, intra-retrieval, and post-retrieval phases, without requiring model fine-tuning. During pre-retrieval, tool documents are enhanced with key information and stored in the Toolshed Knowledge Base. Intra-retrieval focuses on query planning and transformation to increase retrieval accuracy. Post-retrieval refines the retrieved tool documents and enables self-reflection. Furthermore, by varying both the total number of tools (tool-M) an Agent has access to and the tool selection threshold (top-k), we address trade-offs between retrieval accuracy, agent performance, and token cost. Our approach achieves 46%, 56%, and 47% absolute improvements on the ToolE single-tool, ToolE multi-tool and Seal-Tools benchmark datasets, respectively (Recall@5).

Medical agent systems are increasingly expected to support interactive clinical decision making rather than only static question answering. In such settings, effective agents must reuse prior experience across evolving cases, yet existing memory mechanisms often retain raw historical traces that are redundant, noisy, and difficult to govern. More importantly, they rarely distinguish which memories are truly useful for future reasoning. This limits their ability to accumulate compact and reliable experience for long-horizon clinical reasoning. To close this gap, we propose SkeMex, a post-deployment self-evolution framework that improves medical agents through a skill-based memory without updating model weights. SkeMex distills informative interaction trajectories into structured skills that encode reusable procedural knowledge, and organizes them into a multi-branch repository spanning general, task-specific, and action-level experience. To determine which memories should be reused and retained, SkeMex estimates context-dependent utility from environment feedback and uses it to guide value-aware retrieval and repository governance. A closed-loop ``Read--Write--Assess--Govern" lifecycle further supports continual evolution by writing new skills, updating utilities, promoting useful memories, and removing harmful entries. Experiments across diverse clinical tasks show that SkeMex consistently outperforms representative memory-based agents in both offline and online settings. It also generalizes across model backbones and supports transferable skill memory. All data and code will be released publicly.

Long-horizon search agents accumulate large amounts of retrieved content across many tool calls, making context-budget efficiency increasingly important. A minimal intervention is to mask stale observations from the context as the trajectory progresses, but it remains unclear when this form of context management helps and why. We study observation masking through a systematic sweep over various agent backbones (4B to 284B parameters) and three retrievers on offline and live-web agentic search benchmarks. We find that the accuracy gain from masking follows an asymmetric inverted-U shape when plotted against the model's accuracy without context management: a plateau under weak retrievers, a peak when a strong retriever meets a mid-capacity model, and a sharp collapse when the model is saturated. This pattern reflects the interaction between retriever recall and the model's implicit filtering capacity, rather than either factor in isolation. Mechanistically, masking implements a token-for-turn trade-off: it removes observations the model has largely stopped attending to and pages the agent rarely re-opens. The added turns help when they convert failures into successes, but they fail when masking removes evidence the model would otherwise have used. We therefore reframe context management as a regime-dependent intervention and provide a holistic perspective for analyzing context use in agentic deep search. We release our scaffold and trajectories here (https://github.com/i-DeepSearch/observation-masking) to support future research.

Conventional recommender systems (RSs) face challenges in precisely capturing users' fine-grained preferences. Large language models (LLMs) have shown capabilities in commonsense reasoning and leveraging external tools that may help address these challenges. However, existing LLM-based RSs suffer from hallucinations, misalignment between the semantic space of items and the behavior space of users, or overly simplistic control strategies (e.g., whether to rank or directly present existing results). To bridge these gap, we introduce ToolRec, a framework for LLM-empowered recommendations via tool learning that uses LLMs as surrogate users, thereby guiding the recommendation process and invoking external tools to generate a recommendation list that aligns closely with users' nuanced preferences. We formulate the recommendation process as a process aimed at exploring user interests in attribute granularity. The process factors in the nuances of the context and user preferences. The LLM then invokes external tools based on a user's attribute instructions and probes different segments of the item pool. We consider two types of attribute-oriented tools: rank tools and retrieval tools. Through the integration of LLMs, ToolRec enables conventional recommender systems to become external tools with a natural language interface. Extensive experiments verify the effectiveness of ToolRec, particularly in scenarios that are rich in semantic content.

An agent harness is the external control layer that turns a base LLM into an executable agent by managing context, tools, orchestration, memory, decoding, and output handling. While harness design strongly affects agent behavior, most automatic improvement methods optimize narrower artifacts such as prompts, pipelines, or workflows, and deployed agents usually reuse a single global harness for all cases. We introduce MemoHarness, an adaptive harness optimization framework that learns from its own executions. MemoHarness decomposes the harness into six editable control dimensions, stores per-case diagnoses and distilled global patterns in a dual-layer experience bank, and adapts the learned harness to each test case using retrieved experience without test-time labels, feedback, or additional search. In our evaluation across shell-agent, code-generation, and analytical-reasoning benchmarks, MemoHarness improves over the fixed harnesses we compare against and shows selective transfer to unseen suites and base models. Its additional context can also remain cost-competitive when much of the retrieved experience is cacheable. These results provide evidence that execution experience is a practical substrate for building agent harnesses that are more adaptive than a single static configuration, while leaving broader claims about statistical robustness and component attribution to future work.

Large language models (LLMs) have the remarkable ability to solve new tasks with just a few examples, but they need access to the right tools. Retrieval Augmented Generation (RAG) addresses this problem by retrieving a list of relevant tools for a given task. However, RAG's tool retrieval step requires all the required information to be explicitly present in the query. This is a limitation, as semantic search, the widely adopted tool retrieval method, can fail when the query is incomplete or lacks context. To address this limitation, we propose Context Tuning for RAG, which employs a smart context retrieval system to fetch relevant information that improves both tool retrieval and plan generation. Our lightweight context retrieval model uses numerical, categorical, and habitual usage signals to retrieve and rank context items. Our empirical results demonstrate that context tuning significantly enhances semantic search, achieving a 3.5-fold and 1.5-fold improvement in Recall@K for context retrieval and tool retrieval tasks respectively, and resulting in an 11.6% increase in LLM-based planner accuracy. Additionally, we show that our proposed lightweight model using Reciprocal Rank Fusion (RRF) with LambdaMART outperforms GPT-4 based retrieval. Moreover, we observe context augmentation at plan generation, even after tool retrieval, reduces hallucination.

Augmenting large language models (LLMs) with external tools is a promising approach to enhance their capabilities. Effectively leveraging this potential for complex tasks hinges crucially on improving their ability to use tools. Synthesizing tool use data by simulating the real world is an effective approach. Nevertheless, our investigation reveals that training gains significantly decay as the scale of these data increases. The primary factor is the model's poor performance (a.k.a deficiency) in complex scenarios, which hinders learning from data using SFT. Driven by this objective, we propose an iterative reinforced fine-tuning strategy to continually guide the model to alleviate it. Specifically, we first identify deficiency-related data based on feedback from the policy model, then perform a Monte Carlo Tree Search to collect fine-grained preference pairs to pinpoint deficiencies. Subsequently, we update the policy model using preference optimization to align with ground truth and misalign with deficiencies. This process can be iterated. Moreover, before the iteration, we propose an easy-to-hard warm-up SFT strategy to facilitate learning from challenging data. The experiments demonstrate our models go beyond the same parametric models, outperforming many larger open-source and closed-source models. Additionally, it has achieved notable training gains in complex tool use scenarios.

Large language models are increasingly used as programming agents for repository level software engineering tasks. While recent benchmarks evaluate correctness in realistic codebases, they largely treat tasks as independent and do not assess whether agents can reuse experience across related problems. As a result, the ability of agents to accumulate, retrieve, and apply prior experience, as well as the efficiency gains from such reuse, remains difficult to measure. We introduce SWE-ContextBench, a benchmark designed to explicitly evaluate experience reuse in programming agents. Built on SWE-Bench Lite, SWE-ContextBench augments 300 base tasks with 99 related tasks derived from real dependency and reference relationships among GitHub issues and pull requests, forming task sequences with shared context. The benchmark evaluates agents along three complementary dimensions: prediction accuracy, time efficiency, and cost efficiency. Using SWE-ContextBench, we study multiple experience reuse settings, including oracle guided and autonomous retrieval, as well as full execution trajectories and compact summaries. Our results show that correctly selected summarized experience improves resolution accuracy and substantially reduces runtime and token cost, particularly on harder tasks. In contrast, unfiltered or incorrectly selected experience provides limited or negative benefits. These findings highlight the importance of experience representation and retrieval quality, and position SWE-ContextBench as a principled benchmark for studying experience reuse in programming agents.

Large language models are increasingly deployed as agents that solve tasks by interacting with external tool environments. Although recent tool-use benchmarks increasingly cover complex task settings, they still largely assume clean, stable, and trustworthy tool environments, leaving tool-environment unreliability insufficiently examined. We introduce ToolBench-X, a benchmark for evaluating agents under recoverable reliability hazards. ToolBench-X contains executable multi-step tasks across diverse domains and sequential, parallel, and mixed workflows, each paired with deterministic tools and a canonical final answer for automatic evaluation. Starting from clean tool environments, ToolBench-X injects five structured hazard types: Specification Drift, Invocation Error, Execution Failure, Output Drift, and Cross-source Conflict. Crucially, each injected instance remains solvable through at least one valid recovery path, such as retrying, fallback, verification, or cross-checking. Experiments reveal a substantial reliability gap: agents that perform well with reliable tools often fail under recoverable hazards. Further analysis shows that failures are driven less by tool-use volume or inference budget than by limited hazard diagnosis and ineffective recovery. Targeted recovery hints recover many failed tasks, while test-time scaling yields more limited gains. These results suggest that tool-use evaluation should move beyond function-call accuracy toward task completion under unreliable tool environments. The code and data is available at https://github.com/Foreverskyou/ToolBench-X.

Current tool-use large language models (LLMs) are trained on static datasets, enabling them to interact with external tools and perform multi-step, tool-integrated reasoning, which produces tool-call trajectories. However, these models imitate how a query is resolved in a generic tool-call routine, thereby failing to explore possible solutions and demonstrating limited performance in an evolved, dynamic tool-call environment. In this work, we propose PORTool, a reinforcement learning (RL) method that encourages a tool-use LLM to explore various trajectories yielding the correct answer. Specifically, this method starts with generating multiple rollouts for a given query, and some of them share the first few tool-call steps, thereby forming a tree-like structure. Next, we assign rewards to each step, based on its ability to produce a correct answer and make successful tool calls. A shared step across different trajectories receives the same reward, while different steps under the same fork receive different rewards. Finally, these step-wise rewards are used to calculate fork-relative advantages, blended with trajectory-relative advantages, to train the LLM for tool use. The experiments utilize 17 tools to address user queries, covering both time-sensitive and time-invariant topics. We conduct ablation studies to systematically justify the necessity and the design robustness of step-wise rewards. Furthermore, we compare the proposed PORTool with other training approaches and demonstrate significant improvements in final accuracy and the number of tool-call steps.

Context engineering has become central to building reliable AI agents, yet it remains largely unmeasured. Agents do not fail in isolation: their behavior is shaped by the instructions, tools, memory, retrieved knowledge, guardrails, and untrusted inputs accumulated in their context. When this context is weak, agents drift, hallucinate, misuse tools, ignore constraints, become vulnerable to injection, and waste tokens. This paper validates context-engineering quality as an independent leading indicator of agent reliability. We implement the measurement in ProofAgent-Harness, an open-source infrastructure for AI agent evaluation that uses multi-juror, consensus-based scoring. The harness assesses context across seven criteria: role clarity, guardrail coverage, instruction consistency, tool schema quality, grounding sufficiency, injection hardening, and token efficiency. Crucially, the context score is isolated from behavioral metrics and release decisions, enabling a non-circular validation. Through a controlled context-quality study across regulated agent domains, holding frontier LLM agents fixed and varying only their operating context, we show that context-quality criteria consistently predict their corresponding behavioral outcomes. Grounding sufficiency predicts hallucination resistance, guardrail coverage predicts manipulation resistance, instruction consistency predicts instruction following, and tool-schema quality predicts tool use. These findings establish context measurement as a validated preflight signal for agent reliability and position context engineering as an auditable layer of agent evaluation and governance.

Machine unlearning for large language models (LLMs) aims to selectively remove memorized content such as private data, copyrighted text, or hazardous knowledge, without costly full retraining. Most existing methods require a retain set of curated examples to prevent catastrophic degradation of general model utility, creating an extra data dependency that complicates deployment. We propose SHRED (Self-distillation via High-surprisal-only Retain-set-free Entropy Demotion), a retain-set-free unlearning method built on a key insight: not all tokens within a forget set instance carry memorized information equally. High-information tokens concentrate the model's memorized knowledge, while low-information tokens reflect general language competence. SHRED operates in two stages. (1) Selection: We perform a forward pass on a forget set instance, collect per-token autoregressive probabilities, and select the bottom (lowest probability, highest Shannon information) as forget positions; the remaining positions are retained as benign anchors. (2) Training: We construct modified KL targets that demote the memorized token's logit at forget positions while preserving the original distribution at benign positions. The model is then trained via a single top KL self-distillation objective that simultaneously drives forgetting and utility preservation. We evaluate SHRED across four standard unlearning benchmarks and demonstrate that it establishes a new Pareto-optimal trade-off between forget efficacy and model utility, outperforming retain-set-dependent methods. Our analysis shows that SHRED is robust against relearning attacks and membership-inference attacks, and it maintains stable utility even after many sequential unlearning runs.

The performance of LLM-based agents depends not only on the agent itself but also on the quality of the tool interfaces it consumes. While prior work has focused heavily on agent fine-tuning, tool interfaces-including natural language descriptions and parameter schemas-remain largely human-oriented and often become a bottleneck, especially when agents must select from large candidate tool sets. Existing approaches to improving tool interfaces rely on execution traces, which are frequently unavailable in cold-start or privacy-constrained settings, and typically optimize each tool independently, limiting scalability and generalization to unseen tools. We propose Trace-Free+, a curriculum learning framework that progressively transfers supervision from trace-rich settings to trace-free deployment, encouraging the model to abstract reusable interface-usage patterns and tool usage outcomes. To support this approach, we construct a large-scale dataset of high-quality tool interfaces using a structured workflow over a diverse collection of tools. Experiments on StableToolBench and RestBench show consistent gains on unseen tools, strong cross-domain generalization, and robustness as the number of candidate tools scales to over 100, demonstrating that tool interface optimization is a practical and deployable complement to agent fine-tuning.

Agents based on large language models have recently shown strong potential on real-world software engineering (SWE) tasks that require long-horizon interaction with repository-scale codebases. However, most existing agents rely on append-only context maintenance or passively triggered compression heuristics, which often lead to context explosion, semantic drift, and degraded reasoning in long-running interactions. We propose CAT, a new context management paradigm that elevates context maintenance to a callable tool integrated into the decision-making process of agents. CAT formalizes a structured context workspace consisting of stable task semantics, condensed long-term memory, and high-fidelity short-term interactions, and enables agents to proactively compress historical trajectories into actionable summaries at appropriate milestones. To support context management for SWE-agents, we propose a trajectory-level supervision framework, CAT-GENERATOR, based on an offline data construction pipeline that injects context-management actions into complete interaction trajectories. Using this framework, we train a context-aware model, SWE-Compressor. Experiments on SWE-Bench-Verified demonstrate that SWE-Compressor reaches a 57.6% solved rate and significantly outperforms ReAct-based agents and static compression baselines, while maintaining stable and scalable long-horizon reasoning under a bounded context budget.

Tool-augmented large language models (LLMs) are attracting widespread attention when accessing up-to-date knowledge and alleviating hallucination issues. Nowadays, advanced closed-source LLMs (e.g., ChatGPT) have demonstrated surprising tool-usage capabilities through prompting and in-context learning techniques. To empower the capabilities of open-source LLMs (e.g., LLaMA) in manipulating tools, current efforts focus on either template-driven or token-triggered tool-usage. However, the former hampers LLMs' flexibility to address diverse user's queries due to constrained tool interactions, while the latter limits the generalizability when engaging with new tools, since tool-usage learning is based on task- and tool-specific datasets. To alleviate these concerns, in this paper, we propose a decision-aware and generalizable tool-usage framework (DEER). Specifically, we first construct the tool-usage samples with multiple decision branches via an automatic generation pipeline, thereby inspiring the decision-making awareness of LLMs under diverse scenarios. Meanwhile, we propose a novel tool sampling strategy to enhance the generalizability of LLMs over unseen tools. Extensive experiments demonstrate that our proposed DEER is effective and significantly outperforms baselines across various datasets.

Humans possess an extraordinary ability to create and utilize tools, allowing them to overcome physical limitations and explore new frontiers. With the advent of foundation models, AI systems have the potential to be equally adept in tool use as humans. This paradigm, i.e., tool learning with foundation models, combines the strengths of specialized tools and foundation models to achieve enhanced accuracy, efficiency, and automation in problem-solving. Despite its immense potential, there is still a lack of a comprehensive understanding of key challenges, opportunities, and future endeavors in this field. To this end, we present a systematic investigation of tool learning in this paper. We first introduce the background of tool learning, including its cognitive origins, the paradigm shift of foundation models, and the complementary roles of tools and models. Then we recapitulate existing tool learning research into tool-augmented and tool-oriented learning. We formulate a general tool learning framework: starting from understanding the user instruction, models should learn to decompose a complex task into several subtasks, dynamically adjust their plan through reasoning, and effectively conquer each sub-task by selecting appropriate tools. We also discuss how to train models for improved tool-use capabilities and facilitate the generalization in tool learning. Considering the lack of a systematic tool learning evaluation in prior works, we experiment with 18 representative tools and show the potential of current foundation models in skillfully utilizing tools. Finally, we discuss several open problems that require further investigation for tool learning. In general, we hope this paper could inspire future research in integrating tools with foundation models.

Recent advancements in large language models (LLMs) integrated with external tools and APIs have successfully addressed complex tasks by using in-context learning or fine-tuning. Despite this progress, the vast scale of tool retrieval remains challenging due to stringent input length constraints. In response, we propose a pre-retrieval strategy from an extensive repository, effectively framing the problem as the massive tool retrieval (MTR) task. We introduce the MTRB (massive tool retrieval benchmark) to evaluate real-world tool-augmented LLM scenarios with a large number of tools. This benchmark is designed for low-resource scenarios and includes a diverse collection of tools with descriptions refined for consistency and clarity. It consists of three subsets, each containing 90 test samples and 10 training samples. To handle the low-resource MTR task, we raise a new query-tool alignment (QTA) framework leverages LLMs to enhance query-tool alignment by rewriting user queries through ranking functions and the direct preference optimization (DPO) method. This approach consistently outperforms existing state-of-the-art models in top-5 and top-10 retrieval tasks across the MTRB benchmark, with improvements up to 93.28% based on the metric Sufficiency@k, which measures the adequacy of tool retrieval within the first k results. Furthermore, ablation studies validate the efficacy of our framework, highlighting its capacity to optimize performance even with limited annotated samples. Specifically, our framework achieves up to 78.53% performance improvement in Sufficiency@k with just a single annotated sample. Additionally, QTA exhibits strong cross-dataset generalizability, emphasizing its potential for real-world applications.

We present Context Window Lifecycle (CWL), a context-management scheme that gives long-horizon LLM agents an effectively unbounded working horizon. As a session accumulates history, CWL keeps the context within budget through graduated, semantically-aware eviction: the agent annotates its trajectory as typed, dependency-linked episodes as work proceeds, and a deterministic, LLM-free policy evicts content in priority order within that structure when a token budget is exceeded. CWL preserves user turns and the exploratory context the agent is actively reasoning over, while aggressively shedding action episodes whose effects are already persisted in the environment, keeping active context near a stable ceiling that also avoids the performance degradation associated with very large prompts. Compared to summarization-based compaction, CWL avoids four well-known limitations: unpredictable lossiness, destruction of causal structure, blocking model cost, and compression-induced hallucination. Compared to recency truncation, CWL is semantically aware: it drops the oldest-and-most-recoverable content according to the dependency graph rather than oldest-in-time regardless of relevance. We describe the annotation protocol, the episode graph, the eviction policy, and the token-accounting loop, and evaluate CWL on long-horizon agentic benchmarks: a single agent session completing 89 sequential tasks across 80 million tokens with no measurable degradation in task accuracy relative to per-task isolated sessions

Large language model (LLM) agents accumulate heterogeneous context, including system instructions, plans, user turns, retrieved documents, tool outputs, and intermediate reasoning, whose key-value (KV) cache can become a major memory bottleneck. Existing eviction policies generally apply the same attention- or recency-based rule to every token, ignoring semantic structure already available to the agent orchestrator. We introduce MemDecay, a training-free, region-aware KV-cache eviction policy. MemDecay assigns tokens region-specific base priorities and decay rates, refreshes retention scores when tokens receive attention, and evicts the lowest-scoring pages under a fixed cache budget while allowing critical regions to be pinned. We also provide a procedure for calibrating decay rates from measured attention lifetimes. We evaluate MemDecay at approximately 450 and 1,700 token contexts using Qwen2.5-1.5B and 3B. Across all settings, attention lifetimes differ by an order of magnitude across regions: system-token half-lives range from 148 to 189 decoding steps, compared with 14 to 16 for scratchpad tokens. Pinning preserves system-region facts at full-cache accuracy in every setting, while no baseline preserves more than 13 of 24. Region-aware retention remains effective as context grows, whereas recency-based retention collapses. Accumulated-attention retention performs better on unpinned content, however, and ablations identify attention-score normalization as the main limitation of the current formulation. These results establish semantic prompt structure as a robust signal for KV-cache management while clarifying how it should be combined with attention-based importance.

The advent of agentic multimodal models has empowered systems to actively interact with external environments. However, current agents suffer from a profound meta-cognitive deficit: they struggle to arbitrate between leveraging internal knowledge and querying external utilities. Consequently, they frequently fall prey to blind tool invocation, resorting to reflexive tool execution even when queries are resolvable from the raw visual context. This pathological behavior precipitates severe latency bottlenecks and injects extraneous noise that derails sound reasoning. Existing reinforcement learning protocols attempt to mitigate this via a scalarized reward that penalizes tool usage. Yet, this coupled formulation creates an irreconcilable optimization dilemma: an aggressive penalty suppresses essential tool use, whereas a mild penalty is entirely subsumed by the variance of the accuracy reward during advantage normalization, rendering it impotent against tool overuse. To transcend this bottleneck, we propose HDPO, a framework that reframes tool efficiency from a competing scalar objective to a strictly conditional one. By eschewing reward scalarization, HDPO maintains two orthogonal optimization channels: an accuracy channel that maximizes task correctness, and an efficiency channel that enforces execution economy exclusively within accurate trajectories via conditional advantage estimation. This decoupled architecture naturally induces a cognitive curriculum-compelling the agent to first master task resolution before refining its self-reliance. Extensive evaluations demonstrate that our resulting model, Metis, reduces tool invocations by orders of magnitude while simultaneously elevating reasoning accuracy.

Long-horizon large language model (LLM) agents are fundamentally limited by context. As interactions become longer, tool descriptions, retrieved memories, and raw environmental feedback accumulate and push out the information needed for decision-making. At the same time, useful experience gained from tasks is often lost across episodes. We argue that long-horizon performance is determined not by context length, but by how much decision-relevant information is maintained within a finite context budget. We present GenericAgent (GA), a general-purpose, self-evolving LLM agent system built around a single principle: context information density maximization. GA implements this through four closely connected components: a minimal atomic tool set that keeps the interface simple, a hierarchical on-demand memory that only shows a small high-level view by default, a self-evolution mechanism that turns verified past trajectories into reusable SOPs and executable code, and a context truncation and compression layer that maintains information density during long executions. Across task completion, tool use efficiency, memory effectiveness, self-evolution, and web browsing, GA consistently outperforms leading agent systems while using significantly fewer tokens and interactions, and it continues to evolve over time. Project: https://github.com/lsdefine/GenericAgent

Large language models (LLMs) increasingly act as autonomous agents that must decide when to answer directly vs. when to invoke external tools. Prior work studying adaptive tool use has largely treated tool necessity as a model-agnostic property, annotated by human or LLM judge, and mostly cover cases where the answer is obvious (e.g., fetching the weather vs. paraphrasing text). However, tool necessity in the wild is more nuanced due to the divergence of capability boundaries across models: a problem solvable by a strong model on its own may still require tools for a weaker one. In this work, we introduce a model-adaptive definition of tool-necessity, grounded in each model's empirical performance. Following this definition, we compare the necessity against observed tool-call behavior across four models on arithmetic and factual QA dataset, and find substantial mismatches of 26.5-54.0% and 30.8-41.8%, respectively. To diagnose the failure, we decompose tool use into two stages: an internal cognition stage that reflects whether a model believes a tool is necessary, and an execution stage that determines whether the model actually makes a tool-call action. By probing the LLM hidden states, we find that both signals are often linearly decodable, yet their probe directions become nearly orthogonal in the late-layer, last-token regime that drives the next-token action. By tracing the trajectory of samples in the two-stage process, we further discover that the majority of mismatch is concentrated in the cognition-to-action transition, not in cognition itself. These results reveal a knowing-doing gap in LLM tool-use: improving tool-use reliability requires not only better recognition of when tools are needed, but also better translation of that recognition into action.

Large language model (LLM) agents are increasingly used to interact with and execute tasks in dynamic environments. However, a critical yet overlooked limitation of these agents is that they, by default, assume a stationary context, failing to account for the real-world time elapsed between messages. We refer to this as "temporal blindness". This limitation hinders decisions about when to invoke tools, leading agents to either over-rely on stale context and skip needed tool calls, or under-rely on it and redundantly repeat tool calls. To study this challenge, we constructed TicToc, a diverse dataset of multi-turn user-agent message trajectories across 76 scenarios, spanning dynamic environments with high, medium, and low time sensitivity. We collected human preferences between "calling a tool" and "directly answering" on each sample, and evaluated how well LLM tool-calling decisions align with human preferences under varying amounts of elapsed time. Our analysis reveals that existing models display poor alignment with human temporal perception, with no model achieving a normalized alignment rate better than 65% when given time stamp information. We also show that naive, prompt-based alignment techniques have limited effectiveness for most models, but specific post-training alignment can be a viable way to align multi-turn LLM tool use with human temporal perception. Our data and findings provide a first step toward understanding and mitigating temporal blindness, offering insights to foster the development of more time-aware and human-aligned agents.

Machine unlearning aims to remove the influence of specific forget training data due to privacy, copyright or bias concerns while maintaining the model performance on the remaining retain data. Existing unlearning algorithms, such as optimizing a weighted combination of losses, have tried to achieve these objectives of improving forget quality and maintaining retain utility. However, they do not guarantee that these objectives can be improved by a specified extent for all forget and retain data. In this work, we address this limitation with a novel and theoretically-grounded approach from a constrained optimization perspective. Firstly, we identify that the hardness of reconciling both objectives can be quantified by the similarity between the forget data and the retain data. Next, we derive an unlearning algorithm (HAMU) with the overall goal of guaranteeing a specified improvement in forget quality while minimizing the retain utility cost/degradation by updating the model weights based on our hardness measure. Our hardness measure also informs users when retain utility degradation is unavoidable, i.e., both objectives cannot be improved simultaneously, and stopping should be considered. Our algorithm is applicable to non-convex models and is easily parallelizable, making it readily deployable in real-world scenarios. We empirically demonstrate HAMU's superior performance over baselines on both image and text datasets using large models. Our code is available at https://github.com/aoi3142/HAMU.

Recently, tool learning with large language models (LLMs) has emerged as a promising paradigm for augmenting the capabilities of LLMs to tackle highly complex problems. Despite growing attention and rapid advancements in this field, the existing literature remains fragmented and lacks systematic organization, posing barriers to entry for newcomers. This gap motivates us to conduct a comprehensive survey of existing works on tool learning with LLMs. In this survey, we focus on reviewing existing literature from the two primary aspects (1) why tool learning is beneficial and (2) how tool learning is implemented, enabling a comprehensive understanding of tool learning with LLMs. We first explore the "why" by reviewing both the benefits of tool integration and the inherent benefits of the tool learning paradigm from six specific aspects. In terms of "how", we systematically review the literature according to a taxonomy of four key stages in the tool learning workflow: task planning, tool selection, tool calling, and response generation. Additionally, we provide a detailed summary of existing benchmarks and evaluation methods, categorizing them according to their relevance to different stages. Finally, we discuss current challenges and outline potential future directions, aiming to inspire both researchers and industrial developers to further explore this emerging and promising area. We also maintain a GitHub repository to continually keep track of the relevant papers and resources in this rising area at https://github.com/quchangle1/LLM-Tool-Survey.

Agentic systems operating over large tool ecosystems must plan and execute long-horizon workflows under weak or non-verifiable supervision. While frontier models mitigate these challenges through scale and large context budgets, small language models (SLMs) remain brittle: eager tool loading saturates context, execution errors compound over time, and sparse rewards limit learning. We introduce ATLAS, a reinforcement finetuning framework that enables SLMs to operate effectively in large-scale toolspace environments by learning how to acquire context and how to execute actions. Our approach makes two key contributions. First, we treat context control and execution structure as learnable decisions, combining iterative tool loading with programmatic tool orchestration to bound context growth and stabilize long-horizon trajectories. Second, we propose rubric-based reinforcement finetuning, which decomposes task success into structured, task-aligned criteria and enables scalable training using small judge models. Across MCP benchmarks, these design choices yield large and consistent gains over generic RL baselines, allowing a 4B SLM to approach frontier-agent performance under far tighter parameter and context budgets.

Recent advancements in integrating large language models (LLMs) with tools have allowed the models to interact with real-world environments. However, these tool-augmented LLMs often encounter incomplete scenarios when users provide partial information or the necessary tools are unavailable. Recognizing and managing such scenarios is crucial for LLMs to ensure their reliability, but this exploration remains understudied. This study examines whether LLMs can identify incomplete conditions and appropriately determine when to refrain from using tools. To this end, we address a dataset by manipulating instances from two datasets by removing necessary tools or essential information for tool invocation. We confirm that most LLMs are challenged to identify the additional information required to utilize specific tools and the absence of appropriate tools. Our research can contribute to advancing reliable LLMs by addressing scenarios that commonly arise during interactions between humans and LLMs.

Coding agents repeatedly consume long tool observations even though only a small fraction of each observation matters for the next step. We study task-conditioned tool-output pruning: given a focused query and one tool output, return the smallest verbatim evidence block the agent should inspect next. We introduce a benchmark of 11,477 examples built from SWE-bench repository interactions and synthetic multi-ecosystem tool outputs, with a manually curated 618-example test set. We fine-tune Qwen 3.5 2B with LoRA and compare it against larger zero-shot models and heuristic pruning baselines. Our model reaches 0.86 recall and 0.80 F1 while removing 92% of input tokens, outperforming zero-shot Qwen 3.5 35B A3B by 11 recall points and all heuristic baselines by a wide margin.

Tool Calling and Structured Output are two core capabilities of modern Agent systems, yet their interaction under joint deployment conditions remains insufficiently understood. This paper reports a reproducible phenomenon observed in a production Agent system: when Tool Calling and JSON Schema constraints are simultaneously enabled, multiple open-weight models cease invoking tools despite maintaining high schema compliance. We refer to this behavior as Tool Suppression. Through controlled experiments across multiple model families and deployment settings, we consistently reproduce Tool Suppression under joint constraints, while tool execution and schema compliance remain functional when evaluated independently. Further analysis reveals that JSON Schema constraints are compiled into grammar-based token masks, causing tool-call tokens to become unreachable during decoding. This provides an implementation-level explanation for the observed behavior. To interpret the phenomenon, we formulate the Constraint Priority Inversion (CPI) hypothesis, which suggests that schema satisfaction may dominate action-selection behavior under multiple simultaneous constraints. We present CPI as a behavioral hypothesis consistent with the observed evidence rather than a verified internal mechanism. To mitigate the problem, we propose Transparent Two-Pass Execution, an inference-time strategy that decouples tool execution from schema-constrained response generation. Experimental results show that this approach restores tool invocation while preserving structured output guarantees without requiring model retraining. These findings suggest that evaluating tool use and structured output separately may overlook important reliability issues in production Agent systems. Code, data, and docs will be released at https://github.com/Fzsama/Constrain-Tax-26-06.git.

LLM-based agents show strong potential for long-horizon reasoning, yet their context size is limited by deployment factors (e.g., memory, latency, and cost), yielding a constrained context budget. As interaction histories grow, this induces a trade-off between retaining past information and staying within the context limit. To address this challenge, we propose Budget-Aware Context Management (BACM), which formulates context management as a sequential decision problem with a context budget constraint. It enables agents to assess the available budget before incorporating new observations and decide when and how much of the interaction history to compress. We further develop BACM-RL, an end-to-end curriculum-based reinforcement learning approach that learns compression strategies under varying context budgets. Experiments on compositional multi-objective QA and long-horizon web browsing benchmarks show that BACM-RL consistently outperforms prior methods across model scales and task complexities, achieving over 1.6times gains over strong baselines in high-complexity settings, while maintaining strong advantages as budgets shrink, where most methods exhibit a downward performance trend.

Large language models deployed as agents over large tool catalogs face a critical tool-retrieval bottleneck. As embedding-based retrieval approaches rely on compact encoders that may under-capture specialized tool semantics, parametric tool retrieval addresses this by encoding each tool as a virtual token appended to the LLM vocabulary, fine-tuned in two stages (memorization then retrieval SFT) to use the LLM as a retriever, achieving strong performance on standard ToolBench retrieval benchmarks. Yet these benchmarks use verbose, fully-specified queries, and their evaluation applies constrained decoding that restricts outputs to valid token paths, neither reveals whether the model actually understands its tools. We introduce ToolSense, an open-source LLM-powered diagnostic framework that takes any tool catalog as input and automatically generates three benchmarks: a Realistic Retrieval Benchmark (RRB) with queries at three ambiguity tiers, an MCQ probing benchmark, and a QA probing benchmark. Applying ToolSense to ToolBench (~47k tools) and evaluating five parametric model training configurations reveals a knowledge-retrieval dissociation: on RRB queries, several configurations collapse by ~50-64 percentage points compared to fully-specified ToolBench benchmarks, falling below the embedding-model baseline. Additionally, despite strong retrieval performance, some models score near-random on factual probes, suggesting a knowledge-retrieval dissociation. We open-source the ToolSense framework and the ToolBench diagnostic benchmarks at https://github.com/SAP/toolsense.

Agentic LLM systems that generate code through multi-turn tool use face a fundamental context problem: each session starts from zero, discarding the configuration choices, domain constraints, data schemas, and tool-use patterns that made previous sessions productive. Naively persisting entire conversation histories is token-inefficient and counterproductive: irrelevant context degrades generation quality. We introduce shared selective persistent memory, an architecture that identifies and retains four categories of reusable context (task specifications, data schemas, tool configurations, and output constraints) while discarding session-specific reasoning traces. Crucially, this memory is shared: workspaces encapsulating selective memory can be transferred across users with role-based access control, enabling collaborative reuse without redundant specification. We implement it in a deployed collaborative workspace platform where LLM agents produce, edit, and maintain git-versioned artifacts (dashboards, reports, and data-driven documents) from heterogeneous sources (CSV, SQL, REST APIs, and MCP servers). A complementary zero-token data refresh mechanism decouples generated programs from runtime data, enabling artifact reuse without re-invocation. Across three enterprise scenarios, shared selective persistent memory achieves 96% task completion (vs. 79% without memory and 71% with full history). Zero-token refresh eliminates LLM re-invocation for recurring updates (14x task-time reduction), while summary-driven generation cuts per-invocation token cost by 97x versus raw data injection. A replication on four public datasets confirms generalizability, with zero-token refresh succeeding in 12/12 trials. Notably, naive full-history persistence actively degrades completion by biasing the agent with stale traces, while selective memory outperforms both extremes.

Large language model (LLM)-based agents increasingly rely on tool use to complete real-world tasks. While existing works evaluate the LLMs' tool use capability, they largely focus on the final answers yet overlook the detailed tool usage trajectory, i.e., whether tools are selected, parameterized, and ordered correctly. We introduce TRAJECT-Bench, a trajectory-aware benchmark to comprehensively evaluate LLMs' tool use capability through diverse tasks with fine-grained evaluation metrics. TRAJECT-Bench pairs high-fidelity, executable tools across practical domains with tasks grounded in production-style APIs, and synthesizes trajectories that vary in breadth (parallel calls) and depth (interdependent chains). Besides final accuracy, TRAJECT-Bench also reports trajectory-level diagnostics, including tool selection and argument correctness, and dependency/order satisfaction. Analyses reveal failure modes such as similar tool confusion and parameter-blind selection, and scaling behavior with tool diversity and trajectory length where the bottleneck of transiting from short to mid-length trajectories is revealed, offering actionable guidance for LLMs' tool use.

The key-value (KV) cache is a major bottleneck in long-context inference, where memory and computation grow with sequence length. Existing KV eviction methods reduce this cost but typically degrade performance relative to full-cache inference. Our key insight is that full-cache attention is not always optimal: in long contexts, irrelevant tokens can dilute attention away from useful evidence, so selective, learnable eviction can improve generation rather than merely approximate the full cache. We introduce a global retention-based KV eviction method that learns each token's future utility under a unified memory budget. Lightweight retention gates assign utility scores to cached KV entries, and a shared final scoring projection calibrates these scores across all layers and heads. This enables a single global eviction policy in which tokens from different layers, heads, and modalities compete directly for cache capacity. We further provide theoretical analysis showing that preferentially retaining useful tokens reduces attention dilution, and we justify geometric retention as a query-agnostic proxy for future utility. Across diverse long-context language and vision-language reasoning, and multi-turn dialogue benchmarks, our method substantially reduces KV memory while matching or surpassing full-cache inference. These results suggest that learned, globally calibrated KV eviction is not only a compression technique, but also a mechanism for improving long-context reasoning.

Recent studies on software tool manipulation with large language models (LLMs) mostly rely on closed model APIs. The industrial adoption of these models is substantially constrained due to the security and robustness risks in exposing information to closed LLM API services. In this paper, we ask can we enhance open-source LLMs to be competitive to leading closed LLM APIs in tool manipulation, with practical amount of human supervision. By analyzing common tool manipulation failures, we first demonstrate that open-source LLMs may require training with usage examples, in-context demonstration and generation style regulation to resolve failures. These insights motivate us to revisit classical methods in LLM literature, and demonstrate that we can adapt them as model alignment with programmatic data generation, system prompts and in-context demonstration retrievers to enhance open-source LLMs for tool manipulation. To evaluate these techniques, we create the ToolBench, a tool manipulation benchmark consisting of diverse software tools for real-world tasks. We demonstrate that our techniques can boost leading open-source LLMs by up to 90% success rate, showing capabilities competitive to OpenAI GPT-4 in 4 out of 8 ToolBench tasks. We show that such enhancement typically requires about one developer day to curate data for each tool, rendering a recipe with practical amount of human supervision.

Large language model (LLM) unlearning is critical in real-world applications where it is necessary to efficiently remove the influence of private, copyrighted, or harmful data from some users. However, existing utility-centric unlearning metrics (based on model utility) may fail to accurately evaluate the extent of unlearning in realistic settings such as when (a) the forget and retain set have semantically similar content, (b) retraining the model from scratch on the retain set is impractical, and/or (c) the model owner can improve the unlearning metric without directly performing unlearning on the LLM. This paper presents the first data-centric unlearning metric for LLMs called WaterDrum that exploits robust text watermarking for overcoming these limitations. We also introduce new benchmark datasets for LLM unlearning that contain varying levels of similar data points and can be used to rigorously evaluate unlearning algorithms using WaterDrum. Our code is available at https://github.com/lululu008/WaterDrum and our new benchmark datasets are released at https://huggingface.co/datasets/Glow-AI/WaterDrum-Ax.

We study reinforcement learning (RL) fine-tuning of large language model (LLM) agents for long-horizon multi-turn tool use, where context length quickly becomes a fundamental bottleneck. Existing RL pipelines can suffer from degraded instruction following, excessive rollout costs, and most importantly, strict context limits. To address these challenges, we introduce summarization-based context management to training. In specific, it periodically compresses the tool using history by LLM-generated summaries that retain task-relevant information to keep a compact context while enabling the agent to scale beyond the fixed context window. Building on this formulation, we derive a policy gradient representation that seamlessly enables standard LLM RL infrastructures to optimize both tool-use behaviors as well as summarization strategies in an end-to-end fashion. We instantiate this framework with SUmmarization augmented Policy Optimization (SUPO), an LLM RL algorithm that enables long-horizon training beyond a fixed context limit. Experiments on interactive function calling and searching tasks demonstrate that SUPO significantly improves the success rate while maintaining the same or even lower working context length compared to baselines. We also demonstrate that for complex searching tasks, SUPO can further improve the evaluation performance when scaling test-time maximum round of summarization beyond that of training time. Our results establish summarization-based context management as a principled and scalable approach for training RL agents beyond a fixed context length limit.

This paper presents a new tool learning dataset Seal-Tools, which contains self-instruct API-like tools. Seal-Tools not only offers a large number of tools, but also includes instances which demonstrate the practical application of tools. Seeking to generate data on a large scale while ensuring reliability, we propose a self-instruct method to generate tools and instances, allowing precise control over the process. Moreover, our Seal-Tools contains hard instances that call multiple tools to complete the job, among which some are nested tool callings. For precise and comprehensive evaluation, we use strict format control and design three metrics from different dimensions. Therefore, Seal-Tools can serve as a new benchmark to evaluate the tool-calling ability of LLMs. Finally, we evaluate several prevalent LLMs and our finetuned model on Seal-Tools. The results show that current systems are far from perfect. The code, data and experiment results are available at https://github.com/fairyshine/Seal-Tools .

Reward modeling (a.k.a., preference modeling) is instrumental for aligning large language models with human preferences, particularly within the context of reinforcement learning from human feedback (RLHF). While conventional reward models (RMs) have exhibited remarkable scalability, they oft struggle with fundamental functionality such as arithmetic computation, code execution, and factual lookup. In this paper, we propose a tool-augmented preference modeling approach, named Themis, to address these limitations by empowering RMs with access to external environments, including calculators and search engines. This approach not only fosters synergy between tool utilization and reward grading but also enhances interpretive capacity and scoring reliability. Our study delves into the integration of external tools into RMs, enabling them to interact with diverse external sources and construct task-specific tool engagement and reasoning traces in an autoregressive manner. We validate our approach across a wide range of domains, incorporating seven distinct external tools. Our experimental results demonstrate a noteworthy overall improvement of 17.7% across eight tasks in preference ranking. Furthermore, our approach outperforms Gopher 280B by 7.3% on TruthfulQA task in zero-shot evaluation. In human evaluations, RLHF trained with Themis attains an average win rate of 32% when compared to baselines across four distinct tasks. Additionally, we provide a comprehensive collection of tool-related RM datasets, incorporating data from seven distinct tool APIs, totaling 15,000 instances. We have made the code, data, and model checkpoints publicly available to facilitate and inspire further research advancements\url{https://github.com/ernie-research/Tool-Augmented-Reward-Model}.

Large language models (LLMs) increasingly receive information as streams of passages, conversations, and long-context workflows. While longer context windows expose more evidence, they do not ensure that useful information is preserved and reused. We study continual context consolidation: writing current context into model weights while limiting interference with previously consolidated information. We propose Self-Consolidating Language Models (SCoL), a post-training framework in which, given current context, an LLM learns to generate textual update instructions specifying which of its own Transformer layers should be updated. Because committed updates change the model that later generates future selections, we train SCoL with meta-reinforcement learning over an evolving model state. We instantiate SCoL with supervised QA rewards on SQuAD knowledge incorporation and intrinsic likelihood-based rewards for LongBench v2 long-context consolidation. Across both settings, SCoL improves acquisition and retention over prompting, summarization, batch test-time training, and sequential finetuning baselines. Analysis of learned selection patterns shows that SCoL encourages the LLM to generate sparse update locations that align with layers of high Fisher information, suggesting that the model learns to route plasticity toward loss-sensitive regions while limiting interference. Moreover, SCoL transfers from shorter meta-training streams to longer LongBench v2 streams at evaluation, suggesting that our framework supports scalable streaming consolidation.

Large language model (LLM)-based agents have shown strong capabilities in using external tools to solve complex tasks. However, existing evaluations often overlook the temporal dimension of tool use, especially the impact of tool response latency, and are usually limited to single-task settings. In real-world applications, multiple tasks often need to be executed concurrently, and overall efficiency depends on whether an agent can use idle time while waiting for tool responses. We refer to this capability as asynchronous tool calling. To evaluate it, we propose AsyncTool, a benchmark for assessing LLM-based agents in interactive multi-task tool-use environments with delayed tool feedback. AsyncTool presents multiple heterogeneous tasks simultaneously and simulates realistic tool response latency during execution. Using a hybrid data evolution strategy, we construct a diverse asynchronous multitasking dataset that covers multiple scenarios and tool-use patterns. We evaluate models at the step, sub-task, and task levels, and introduce efficiency-oriented metrics to measure task coordination and completion efficiency. Extensive experiments show that delayed tool feedback poses substantial challenges to current agents and leads to clear performance degradation. Models that better coordinate task switching, dependency tracking, and state maintenance achieve stronger performance on AsyncTool. Our analysis identifies key failure modes of current tool-using agents and provides practical insights for designing future systems with stronger temporal reasoning and coordination capabilities.

Large language models, and the agents built on them, spend an ever-growing share of their compute and memory on remembering: caching attention keys and values, carrying long prompts, maintaining recurrent state, and storing what happened in previous turns and sessions. Because none of this memory is free, four largely separate research communities have each learned to compact it. They evict or quantize the KV cache, prune or distill prompts, bound architectural state, and consolidate agent memory. We argue that these are instances of one problem: a rate--distortion decision about what context-derived information to retain versus discard, at what fidelity, under a resource budget, so as to preserve downstream task utility. We make this lens precise with a single compaction objective and a layer-agnostic lower bound, use it to build a seven-axis taxonomy that classifies methods from across the stack uniformly, and use it to transfer mechanisms between layers that have never been connected, from serving-stack KV management to agent long-term memory. Two patterns hold across the survey. At every layer the signal that decides what to keep is attention magnitude or recency, and it fails in the same way everywhere, by discarding, before the query is known and with no way to undo it, information the query later needs. And while compression is measured carefully on single-turn long context, the repeated compaction that agents actually perform is almost never measured, and no benchmark holds one budget axis across all the layers at once. We turn both observations into a benchmark proposal, a small reference experiment, and a set of compaction-aware design principles, and we map the open problems.

Memory retention challenges in deep neural architectures have ongoing limitations in the ability to process and recall extended contextual information. Token dependencies degrade as sequence length increases, leading to a decline in coherence and factual consistency across longer outputs. A structured approach is introduced to mitigate this issue through the reweaving of latent states captured at different processing layers, reinforcing token representations over extended sequences. The proposed Contextual Memory Reweaving framework incorporates a Layered Latent State Reconstruction mechanism to systematically integrate past contextual embeddings without introducing external memory modules. Experimental results demonstrate improvements in recall accuracy across a range of sequence lengths, with notable gains in the retention of rarely occurring tokens and numerical reasoning consistency. Further analysis of computational efficiency indicates that the additional processing overhead remains within acceptable thresholds, enabling scalability across different model sizes. Evaluations in long-form text generation and ambiguous query resolution highlight the capacity of memory reweaving to enhance continuity and reduce inconsistencies over extended outputs. Attention weight distributions reveal more structured allocation patterns, suggesting that reweaved latent states contribute to improved contextual awareness. The findings establish a framework for refining memory retention mechanisms in language models, addressing long-standing challenges in handling complex, multi-step reasoning tasks.

Users often omit essential details in their requests to LLM-based agents, resulting in under-specified inputs for tool use. This poses a fundamental challenge for tool-augmented agents, as API execution typically requires complete arguments, highlighting the need for personalized tool calling. To study this problem, we introduce MPT, a benchmark comprising 265 multi-session dialogues that cover three challenges: Preference Recall, Preference Induction, and Preference Transfer. We also propose PRefine, a test-time memory-augmented method that represents user preferences as evolving hypotheses. Through a generate--verify--refine loop, it extracts reusable constraints from history and improves tool-calling accuracy while using only 1.24% of the tokens required by full-history prompting. These results indicate that robust personalization in agentic systems depends on memory that captures the reasons behind user choices, not just the choices themselves.

Tool learning enables Large Language Models (LLMs) to interact with external environments by invoking tools, serving as an effective strategy to mitigate the limitations inherent in their pre-training data. In this process, tool documentation plays a crucial role by providing usage instructions for LLMs, thereby facilitating effective tool utilization. This paper concentrates on the critical challenge of bridging the comprehension gap between LLMs and external tools due to the inadequacies and inaccuracies inherent in existing human-centric tool documentation. We propose a novel framework, DRAFT, aimed at Dynamically Refining tool documentation through the Analysis of Feedback and Trails emanating from LLMs' interactions with external tools. This methodology pivots on an innovative trial-and-error approach, consisting of three distinct learning phases: experience gathering, learning from experience, and documentation rewriting, to iteratively enhance the tool documentation. This process is further optimized by implementing a diversity-promoting exploration strategy to ensure explorative diversity and a tool-adaptive termination mechanism to prevent overfitting while enhancing efficiency. Extensive experiments on multiple datasets demonstrate that DRAFT's iterative, feedback-based refinement significantly ameliorates documentation quality, fostering a deeper comprehension and more effective utilization of tools by LLMs. Notably, our analysis reveals that the tool documentation refined via our approach demonstrates robust cross-model generalization capabilities.

Existing Tool-Integrated Reasoning (TIR) models have effectively extended the question-answering capabilities of LLMs by incorporating external tools. However, real-world scenarios present numerous open-ended problems where fixed tools often fail to meet task requirements. Furthermore, the lack of self-optimization mechanisms means that erroneous tool outputs can mislead the LLM's responses. Additionally, the construction of existing tools entails significant manual effort, which consequently constrains their applicability. Recognizing that the reasoning traces of LLMs encapsulate implicit problem-solving capabilities, we propose UCT, a novel training-free framework that transforms agents from tool users to tool creators. This approach harvests reasoning experiences and distills them into reusable assets. This method transforms the agent from a mere tool user into a tool creator, enabling adaptive tool creation and self-updating during the inference process. We also introduce a memory consolidation mechanism to maintain the tool library, ensuring high reusability of retained experiential memory for subsequent reasoning tasks. This novel automated tool construction paradigm continuously improves tool quality during reasoning, allowing the overall agent system to progress without additional training. Extensive experiments demonstrate that our method serves as a novel paradigm for enhancing the capabilities of TIR models. In particular, the significant performance gains achieved +20.86%uparrow and +23.04%uparrow on benchmarks across multi-domain mathematical and scientific reasoning tasks validate the self-evolving capability of the agent.

Long-context capability is considered one of the most important abilities of LLMs, as a truly long context-capable LLM enables users to effortlessly process many originally exhausting tasks -- e.g., digesting a long-form document to find answers vs. directly asking an LLM about it. However, existing real-task-based long-context evaluation benchmarks have two major shortcomings. First, benchmarks like LongBench often do not provide proper metrics to separate long-context performance from the model's baseline ability, making cross-model comparison unclear. Second, such benchmarks are usually constructed with fixed input lengths, which limits their applicability across different models and fails to reveal when a model begins to break down. To address these issues, we introduce a length-controllable long-context benchmark and a novel metric that disentangles baseline knowledge from true long-context capabilities. Experiments demonstrate the superiority of our approach in effectively evaluating LLMs.

Tool-Integrated Reasoning (TIR) has emerged as a promising direction by extending Large Language Models' (LLMs) capabilities with external tools during reasoning. Existing TIR methods typically rely on external tool documentation during reasoning. However, this leads to tool mastery difficulty, tool size constraints, and inference inefficiency. To mitigate these issues, we explore Tool-Internalized Reasoning (TInR), aiming at facilitating reasoning with tool knowledge internalized into LLMs. Achieving this goal presents notable requirements, including tool internalization and tool-reasoning coordination. To address them, we propose TInR-U, a tool-internalized reasoning framework for unified reasoning and tool usage. TInR-U is trained through a three-phase pipeline: 1) tool internalization with a bidirectional knowledge alignment strategy; 2) supervised fine-tuning warm-up using high-quality reasoning annotations, and 3) reinforcement learning with TInR-specific rewards. We comprehensively evaluate our method across in-domain and out-of-domain settings. Experiment results show that TInR-U achieves superior performance in both settings, highlighting its effectiveness and efficiency.

Recent advancements in multi-turn voice interaction models have improved user-model communication. However, while closed-source models effectively retain and recall past utterances, whether open-source models share this ability remains unexplored. To fill this gap, we systematically evaluate how well open-source interaction models utilize past utterances using ContextDialog, a benchmark we proposed for this purpose. Our findings show that speech-based models have more difficulty than text-based ones, especially when recalling information conveyed in speech, and even with retrieval-augmented generation, models still struggle with questions about past utterances. These insights highlight key limitations in open-source models and suggest ways to improve memory retention and retrieval robustness.

Long-horizon tasks require sustained perception, reasoning, and exploration, and are a persistent challenge for large language model (LLM) agents. This gap is reflected in their limited performance on continual learning benchmarks such as ARC-AGI-3, especially when models are evaluated out of the box. Various agent harnesses have been proposed to close this gap, and each commits to a strategy for handling long sequences of observations, i.e., what information to save from the environment and how to load it into model context, a choice we argue is particularly consequential. Existing methods for context management face a significant tradeoff, as preserving more information makes retrieving relevant details less tractable. We propose PRO-LONG, a minimal context management framework built around programmatic memory for LLM agents in long-horizon, exploratory settings. PRO-LONG addresses the tradeoff by keeping a complete, structured interaction log and capitalizing on recent progress in coding agents to search this history efficiently. On the full ARC-AGI-3 public game set, PRO-LONG improves over a base coding agent by an average of 18.0 percentage points across frontier models, and matches or exceeds state-of-the-art specialized harnesses (up to 76.1% pass@1) while using 4.2-5.8x fewer tokens. With Fable 5, PRO-LONG achieves 97.4% best@2 at a total cost of \$1,750. Relevant code and logs are available at https://github.com/alexisfox7/PRO-LONG.

Large language models (LLMs) are increasingly characterised in recent evaluation work as having stable, model-level preference and value systems. However, accompanying robustness checks are limited to incidental prompt perturbations such as syntax variation and option reordering. This leaves open whether the measured properties survive when the surrounding task context changes, as it does in most real deployments. We test this directly across two established pairwise paradigms: ranking country preferences and eliciting utility judgements. In both, we make the deployment context -- the high-level task the model is performing while making concrete value-dependent choices -- our controlled variable, varied across framings such as writing a Reddit post or a news article. Across five LLMs and over 1.2M pairwise decisions, deployment context produces variation far larger than prompt paraphrasing and temperature controls. In country preference rankings over 15 countries, context induces widespread, statistically significant rank shifts; the aggregate Global North favouritism reported in prior work is itself context-dependent, with each model's bias shifting systematically across contexts. In utility elicitation over 50 outcomes, broad cross-category ordering is preserved, but fine-grained rankings within domains vary substantially, and cardinal exchange rates between outcomes (e.g. how many lives in one region equal one in another) shift by a factor of 2.47 at the median. Reported model-level preferences and utilities are therefore better understood as context-conditioned measurements than fixed model-level properties: safety guarantees obtained under one framing provide limited assurance in another.

In this paper, we demonstrate that an inherent waveform pattern in the attention allocation of large language models (LLMs) significantly affects their performance in tasks demanding a high degree of context awareness, such as utilizing LLMs for tool-use. Specifically, the crucial information in the context will be potentially overlooked by model when it is positioned in the trough zone of the attention waveform, leading to decreased performance. To address this issue, we propose a novel inference method named Attention Buckets. It allows LLMs to process their input through multiple parallel processes. Each process utilizes a distinct base angle for the rotary position embedding, thereby creating a unique attention waveform. By compensating an attention trough of a particular process with an attention peak of another process, our approach enhances LLM's awareness to various contextual positions, thus mitigating the risk of overlooking crucial information. In the largest tool-use benchmark, our method elevates a 7B model to achieve state-of-the-art performance, comparable to that of GPT-4. On other benchmarks and some RAG tasks, which also demand a thorough understanding of contextual content, Attention Buckets also exhibited notable enhancements in performance.

Equipping Large Language Models (LLMs) with external tools enables them to solve complex real-world problems. However, the robustness of existing methods remains a critical challenge when confronting novel or evolving tools. Existing trajectory-centric paradigms primarily rely on memorizing static solution paths during training, which limits the ability of LLMs to generalize tool usage to newly introduced or previously unseen tools. In this paper, we propose ToolMaster, a framework that shifts tool use from imitating golden tool-calling trajectories to actively learning tool usage through interaction with the environment. To optimize LLMs for tool planning and invocation, ToolMaster adopts a trial-and-execution paradigm, which trains LLMs to first imitate teacher-generated trajectories containing explicit tool trials and self-correction, followed by reinforcement learning to coordinate the trial and execution phases jointly. This process enables agents to autonomously explore correct tool usage by actively interacting with environments and forming experiential knowledge that benefits tool execution. Experimental results demonstrate that ToolMaster significantly outperforms existing baselines in terms of generalization and robustness across unseen or unfamiliar tools. All code and data are available at https://github.com/NEUIR/ToolMaster.

Large Language Models (LLMs) have recently demonstrated strong capabilities in tool use, yet progress in tool retrieval remains hindered by incomplete and heterogeneous tool documentation. To address this challenge, we introduce Tool-DE, a new benchmark and framework that systematically enriches tool documentation with structured fields to enable more effective tool retrieval, together with two dedicated models, Tool-Embed and Tool-Rank. We design a scalable document expansion pipeline that leverages both open- and closed-source LLMs to generate, validate, and refine enriched tool profiles at low cost, producing large-scale corpora with 50k instances for embedding-based retrievers and 200k for rerankers. On top of this data, we develop two models specifically tailored for tool retrieval: Tool-Embed, a dense retriever, and Tool-Rank, an LLM-based reranker. Extensive experiments on ToolRet and Tool-DE demonstrate that document expansion substantially improves retrieval performance, with Tool-Embed and Tool-Rank achieving new state-of-the-art results on both benchmarks. We further analyze the contribution of individual fields to retrieval effectiveness, as well as the broader impact of document expansion on both training and evaluation. Overall, our findings highlight both the promise and limitations of LLM-driven document expansion, positioning Tool-DE, along with the proposed Tool-Embed and Tool-Rank, as a foundation for future research in tool retrieval.

Large language models (LLMs) have had a huge impact on society due to their impressive capabilities and vast knowledge of the world. Various applications and tools have been created that allow users to interact with these models in a black-box scenario. However, one limitation of this scenario is that users cannot modify the internal knowledge of the model, and the only way to add or modify internal knowledge is by explicitly mentioning it to the model during the current interaction. This learning process is called in-context training, and it refers to training that is confined to the user's current session or context. In-context learning has significant applications, but also has limitations that are seldom studied. In this paper, we present a study that shows how the model can suffer from interference between information that continually flows in the context, causing it to forget previously learned knowledge, which can reduce the model's performance. Along with showing the problem, we propose an evaluation benchmark based on the bAbI dataset.

Tools are essential for large language models (LLMs) to acquire up-to-date information and take consequential actions in external environments. Existing work on tool-augmented LLMs primarily focuses on the broad coverage of tools and the flexibility of adding new tools. However, a critical aspect that has surprisingly been understudied is simply how accurately an LLM uses tools for which it has been trained. We find that existing LLMs, including GPT-4 and open-source LLMs specifically fine-tuned for tool use, only reach a correctness rate in the range of 30% to 60%, far from reliable use in practice. We propose a biologically inspired method for tool-augmented LLMs, simulated trial and error (STE), that orchestrates three key mechanisms for successful tool use behaviors in the biological system: trial and error, imagination, and memory. Specifically, STE leverages an LLM's 'imagination' to simulate plausible scenarios for using a tool, after which the LLM interacts with the tool to learn from its execution feedback. Both short-term and long-term memory are employed to improve the depth and breadth of the exploration, respectively. Comprehensive experiments on ToolBench show that STE substantially improves tool learning for LLMs under both in-context learning and fine-tuning settings, bringing a boost of 46.7% to Mistral-Instruct-7B and enabling it to outperform GPT-4. We also show effective continual learning of tools via a simple experience replay strategy.

Tool-augmented large language models (LLMs) leverage tools, often in the form of APIs, to enhance their reasoning capabilities on complex tasks, thus taking on the role of intelligent agents interacting with the real world. The recently introduced ToolLLaMA model by Qin et al. [2024] utilizes the depth-first search-based decision tree (DFSDT) method for reasoning with 16000+ real-world APIs, which effectively improves the planning and inferencing performance of tool-augmented LLMs compared to traditional chain reasoning approaches. However, their approach only employs successful paths from decision trees (also called inference trees) for supervised fine-tuning (SFT) during training, which does not fully exploit the advantages of the tree of thought. In this study, we propose an inference trajectory optimization framework based on the preference data extracted from decision trees to address this limitation. We first introduce a novel method for constructing preference data from the tree of thought, capitalizing on the failed explorations previously overlooked in the trees. Specifically, we generate an effective step-wise preference dataset, named ToolPreference, for tool use based on the ToolBench dataset. In the subsequent training phase, we first fine-tune the LLM with tool-usage expert trajectories and then use these step-wise preference pairs for direct preference optimization (DPO) to update the policy of the LLM, resulting in our ToolPrefer-LLaMA (TP-LLaMA) model. Our experiments demonstrate that by obtaining insights from errors in inference trees, TP-LLaMA significantly outperforms the baselines across almost all test scenarios by a large margin and exhibits better generalization capabilities with unseen APIs. At the same time, TP-LLaMA has also demonstrated superior reasoning efficiency compared to the baselines, making it more suitable for complex tool-usage reasoning tasks.

LLM-based coding agents have shown strong performance on automated issue resolution benchmarks, yet existing evaluations largely focus on final task success, providing limited insight into how agents retrieve and use code context during problem solving. We introduce ContextBench, a process-oriented evaluation of context retrieval in coding agents. ContextBench consists of 1,136 issue-resolution tasks from 66 repositories across eight programming languages, each augmented with human-annotated gold contexts. We further implement an automated evaluation framework that tracks agent trajectories and measures context recall, precision, and efficiency throughout issue resolution. Using ContextBench, we evaluate four frontier LLMs and five coding agents. Our results show that sophisticated agent scaffolding yields only marginal gains in context retrieval ("The Bitter Lesson" of coding agents), LLMs consistently favor recall over precision, and substantial gaps exist between explored and utilized context. ContextBench augments existing end-to-end benchmarks with intermediate gold-context metrics that unbox the issue-resolution process. These contexts offer valuable intermediate signals for guiding LLM reasoning in software tasks.

Despite impressive advances in agent systems, multi-turn tool-use scenarios remain challenging. It is mainly because intent is clarified progressively and the environment evolves with each tool call. While reusing past experience is natural, current LLM agents either treat entire trajectories or pre-defined subtasks as indivisible units, or solely exploit tool-to-tool dependencies, hindering adaptation as states and information evolve across turns. In this paper, we propose a State Integrated Tool Graph (SIT-Graph), which enhances multi-turn tool use by exploiting partially overlapping experience. Inspired by human decision-making that integrates episodic and procedural memory, SIT-Graph captures both compact state representations (episodic-like fragments) and tool-to-tool dependencies (procedural-like routines) from historical trajectories. Specifically, we first build a tool graph from accumulated tool-use sequences, and then augment each edge with a compact state summary of the dialog and tool history that may shape the next action. At inference time, SIT-Graph enables a human-like balance between episodic recall and procedural execution: when the next decision requires recalling prior context, the agent retrieves the state summaries stored on relevant edges and uses them to guide its next action; when the step is routine, it follows high-confidence tool dependencies without explicit recall. Experiments across multiple stateful multi-turn tool-use benchmarks show that SIT-Graph consistently outperforms strong memory- and graph-based baselines, delivering more robust tool selection and more effective experience transfer.

Augmenting large language models (LLMs) with external tools has emerged as a promising approach to solving complex problems. However, traditional methods, which finetune LLMs with tool demonstration data, can be both costly and restricted to a predefined set of tools. Recent in-context learning paradigm alleviates these issues, but the limited context length only allows for a few shots of demonstrations, leading to suboptimal understandings of the tools. Moreover, when there are numerous tools to choose from, in-context learning could completely fail to work. In this paper, we propose an alternative approach, ToolkenGPT, which combines the benefits of both sides. Our approach represents each tool as a token (toolken) and learns an embedding for it, enabling tool calls in the same way as generating a regular word token. Once a toolken is triggered, the LLM is prompted to complete arguments for the tool to execute. ToolkenGPT offers the flexibility to plug in an arbitrary number of tools by expanding the set of toolkens on the fly. In addition, it improves tool use by allowing extensive demonstration data for learning the toolken embeddings. In diverse domains, including numerical reasoning, knowledge-based question answering, and embodied plan generation, our approach effectively augments LLMs with tools and substantially outperforms various latest baselines. ToolkenGPT demonstrates the promising ability to use relevant tools from a large tool set in complex scenarios.

Large language models (LLMs) can now access a wide range of external tools, thanks to the Model Context Protocol (MCP). This greatly expands their abilities as various agents. However, LLMs rely entirely on the text descriptions of tools to decide which ones to use--a process that is surprisingly fragile. In this work, we expose a vulnerability in prevalent tool/function-calling protocols by investigating a series of edits to tool descriptions, some of which can drastically increase a tool's usage from LLMs when competing with alternatives. Through controlled experiments, we show that tools with properly edited descriptions receive over 10 times more usage from GPT-4.1 and Qwen2.5-7B than tools with original descriptions. We further evaluate how various edits to tool descriptions perform when competing directly with one another and how these trends generalize or differ across a broader set of 10 different models. These phenomenons, while giving developers a powerful way to promote their tools, underscore the need for a more reliable foundation for agentic LLMs to select and utilize tools and resources.

Long-horizon agents depend on context management: systems compress, summarize, and evict old tokens so tasks can continue beyond finite windows. That is safe only when dropped information is no longer needed or has been internalized. Plans are the stress case: they are written early, used for many steps, and first to be evicted. We introduce replay pairing, a diagnostic that runs the same trajectory with and without the plan in history and measures hidden-state cosine distance. On Llama-3.1-70B, plan signal spikes to 0.453 one step after the plan, then falls 4.1x in a single action-observation step; HotpotQA falls 12.4x. This is evidence that standard LLM agents do not carry plans forward as persistent state, and instead depend on the plan remaining in context. A layer-L32 probe detects this decay as a diagnostic, not as proof that it reads plan content itself. Reasoning models add a measurement confound: their `<think>` traces re-derive plan content, so standard stripping leaves plan evidence in the stripped condition. We name this the reasoning-trace confound and fix it with strict stripping, which removes prior `<think>` blocks from the stripped run only. It recovers +163% of the step+1 signal in-sample and +153% held out, while not meaningfully changing non-reasoning Llama (+4.8%). On DeepSeek-R1-Distill-Llama-70B, a Llama-trained probe transfers at AUROC 0.748 (p=6e-4), while R1-specific probes reach 1.000, suggesting R1 encodes plan signal in a different hidden-state direction. Finally, a compression stress test shows the practical cost: naive plan eviction cuts ALFWorld success by 34.7pp, while probe-gated re-surfacing does not recover it. The contribution is a measurement and stress-test framework showing that agent-critical information can be context-resident rather than persistent. Context management is load bearing, but plan protection alone is not enough.

Research Agents enable models to gather information from the web using tools to answer user queries, requiring them to dynamically interleave internal reasoning with tool use. While such capabilities can in principle be learned via reinforcement learning with verifiable rewards (RLVR), we observe that agents often exhibit poor exploration behaviors, including premature termination and biased tool usage. As a result, RLVR alone yields limited improvements. We propose SynPlanResearch-R1, a framework that synthesizes tool-use trajectories that encourage deeper exploration to shape exploration during cold-start supervised fine-tuning, providing a strong initialization for subsequent RL. Across seven multi-hop and open-web benchmarks, \framework improves performance by up to 6.0% on Qwen3-8B and 5.8% on Qwen3-4B backbones respectively compared to SOTA baselines. Further analyses of tool-use patterns and training dynamics compared to baselines shed light on the factors underlying these gains. Our code is publicly available at https://github.com/HansiZeng/syn-plan-research.

Pre-trained Large Language Models (LLMs) require post-training methods such as supervised fine-tuning (SFT) on instruction-response pairs to enable instruction following. However, this process can potentially harm existing capabilities learned during pre-training. In this paper, we investigate the loss of context awareness after SFT, where context awareness is defined as the ability to extract and understand information from user-provided context and respond accordingly. We identify and demonstrate that the loss of context awareness, particularly in open-source models, occurs in instruction fine-tuned LLMs when the chat template is applied to input prompts. We identify that the performance decline is associated with a bias toward different roles learned during conversational instruction fine-tuning. We demonstrate this correlation by visualizing changes in attention allocation after the chat template is applied and manually steering the attention heads. The bias can be learned from training examples that align with the model's internal knowledge and rely less on the user-provided context to generate correct responses. Based on these observations, we propose a metric to identify context-dependent examples from general instruction fine-tuning datasets. We then apply conditional instruction fine-tuning with a context-dependency indicator, enabling the model to preserve context awareness after SFT. Empirical experiments on four context-dependent downstream tasks and three pre-trained LLMs of different sizes show that our method effectively mitigates the loss of context awareness without compromising general instruction-following capabilities.

External tools help large language models succeed at tasks where they would otherwise typically fail. In existing frameworks, choosing tools at test time relies on naive greedy decoding, regardless of whether the model has been fine-tuned on tool-annotated data or prompted with in-context examples. In contrast, we find that gathering and choosing among a suitable set of candidate tools has greater potential to lead to an optimal selection. We present Tool selECTion via meta-reasONing (TECTON), a two-phase system that first reasons over a task and outputs candidate tools using a custom fine-tuned language modelling head. Then, with the custom head disabled, it meta-reasons (i.e., it reasons over the previous reasoning process) to make a final choice. We show that TECTON results in substantial gains--both in-distribution and out-of-distribution--on a range of math reasoning datasets.

Pruning long context for coding agents has been a vital technology for efficient context management. While existing context pruning methods such as SWE-Pruner realize this by attaching a separate code classifier, we find the agent itself encodes internal representations indicating the relevance of code context when reading tool output. Based on this finding, we propose SWE-Pruner Pro, which prunes tool outputs directly inside the agent. Concretely, a small head turns the agent's own internal representations into a keep-or-prune label for each line, with a length-aware embedding keyed to each tool output's line count. Across two open-weight backbones and four multi-turn benchmarks, SWE-Pruner Pro saves up to 39% of prompt and completion tokens while preserving task quality, with bounded inference overhead. Notably, on MiMo-V2-Flash SWE-Pruner Pro additionally raises the SWE-Bench Verified resolve rate by +3.8% and the long-context Oolong accuracy by +2.2 points.

Current long-context benchmarks primarily focus on retrieval-based tests, requiring Large Language Models (LLMs) to locate specific information within extensive input contexts, such as the needle-in-a-haystack (NIAH) benchmark. Long-context generation refers to the ability of a language model to generate coherent and contextually accurate text that spans across lengthy passages or documents. While recent studies show strong performance on NIAH and other retrieval-based long-context benchmarks, there is a significant lack of benchmarks for evaluating long-context generation capabilities. To bridge this gap and offer a comprehensive assessment, we introduce a synthetic benchmark, LongGenBench, which allows for flexible configurations of customized generation context lengths. LongGenBench advances beyond traditional benchmarks by redesigning the format of questions and necessitating that LLMs respond with a single, cohesive long-context answer. Upon extensive evaluation using LongGenBench, we observe that: (1) both API accessed and open source models exhibit performance degradation in long-context generation scenarios, ranging from 1.2% to 47.1%; (2) different series of LLMs exhibit varying trends of performance degradation, with the Gemini-1.5-Flash model showing the least degradation among API accessed models, and the Qwen2 series exhibiting the least degradation in LongGenBench among open source models.

Large language model (LLM) agents often struggle in long-context interactions. As the agent accumulates more interaction history, context management approaches such as sliding window and prompt compression may omit earlier structured information that later steps rely on. Recent retrieval-based memory systems surface relevant content but still overlook the causal and logical structure needed for multi-step reasoning. We introduce ContextWeaver, a selective and dependency-structured memory framework that organizes an agent's interaction trace into a graph of reasoning steps and selects the relevant context for future actions. Unlike prior context management approaches, ContextWeaver supports: (1) dependency-based construction and traversal that link each step to the earlier steps it relies on; (2) compact dependency summarization that condenses root-to-step reasoning paths into reusable units; and (3) a lightweight validation layer that incorporates execution feedback. On the SWE-Bench Verified and Lite benchmarks, ContextWeaver improves performance over a sliding-window baseline in pass@1, while reducing reasoning steps and token usage. Our observations suggest that modeling logical dependencies provides a stable and scalable memory mechanism for LLM agents that use tools.

Long agent traces composed of chains of thought and tool calls accumulate stale content that anchor subsequent generations, and eventually outgrow the context window. Existing scaffolds mitigate it with fixed-interval compaction triggered at a token threshold. Such triggers pay no heed to trajectory structure, risking discard of partial results mid-derivation or mid-search. We propose SelfCompact, a scaffold that allows the model itself to decide when and how to compact. Specifically, it pairs two inference-time elements: (i) a compaction tool the model invokes to summarize the accumulated context, and (ii) a lightweight rubric specifying when to fire (a sub-task has resolved, or the trajectory is converging) and when to suppress (mid-derivation, or when stuck). Both are needed. The tool alone is unevenly used across open-weight models, often invoked at unhelpful moments or not at all; the rubric alone cannot act. Together, they elicit effective adaptive compaction without any fine-tuning or external supervision. We present empirical results on six benchmarks (competitive math and agentic search) and seven models. Our results show that SelfCompact matches or exceeds fixed-interval summarization at a fraction of the token cost, improving over a no-summarization baseline by up to 18.1 points on math and 5-9 points on agentic search at 30-70% lower per-question cost. Our results expose a meta-cognitive gap: although unprompted models cannot reliably tell when their own context is rotting, a lightweight rubric closes this gap, reframing when to compact as a capability that scaffolds can supply without training.

The KV cache used in large language models has linearly growing time complexity, so LLMs face memory blow-up and reduced decoding efficiency when they process long contexts. Current KV Cache eviction has become an important research direction; however, existing methods based on fixed Soft Tokens (e.g., Judge Q) rely on a static parameter set as the query to evaluate the importance of KV pairs, so they cannot adapt dynamically to different input prompts, and they cannot precisely capture complex and changing task relevance. Also, evicted KV pairs are discarded permanently, so this causes irreversible information loss and context breaks. To address this problem, we propose Meta-Soft, a dynamic compression framework based on probe-driven context integration. Specifically, we build a meta-library with a learnable orthogonal basis matrix L, and we use a selector network with Gumbel-Softmax to produce differentiable sparse combination weights, so we dynamically synthesize the most targeted k Soft Tokens from the input prompt features. We append these Soft Tokens to the end of the input sequence to probe key information. We also introduce an attention-flow based integration mechanism, which redistributes the semantic information of removed tokens into retained tokens, and this keeps the dropped context information effectively. Experiments on multiple datasets show that our method outperforms existing state-of-the-art eviction methods and provides a new solution for KV Cache compression.

Large Language Models can break through knowledge and timeliness limitations by invoking external tools within the Model Context Protocol framework to achieve automated execution of complex tasks. However, with the rapid growth of enterprise-scale MCP services, efficiently and accurately matching target functionalities among thousands of heterogeneous tools has become a core challenge restricting system practicality. Existing approaches generally rely on full-prompt injection or static semantic retrieval, facing issues including semantic disconnection between user queries and tool descriptions, context inflation in LLM input, and high inference latency. To address these challenges, this paper proposes Z-Space, a data-generation-oriented multi-agent collaborative tool invocation framework Z-Space. The Z-Space framework establishes a multi-agent collaborative architecture and tool filtering algorithm: (1) A structured semantic understanding of user queries is achieved through an intent parsing model; (2) A tool filtering module (FSWW) based on fused subspace weighted algorithm realizes fine-grained semantic alignment between intents and tools without parameter tuning; (3) An inference execution agent is constructed to support dynamic planning and fault-tolerant execution for multi-step tasks. This framework has been deployed in the Eleme platform's technical division, serving large-scale test data generation scenarios across multiple business units including Taotian, Gaode, and Hema. Production data demonstrates that the system reduces average token consumption in tool inference by 96.26\% while achieving a 92\% tool invocation accuracy rate, significantly enhancing the efficiency and reliability of intelligent test data generation systems.

Large language models are increasingly deployed as research agents for deep search and long-horizon information seeking, yet their performance often degrades as interaction histories grow. This degradation, known as context rot, reflects a failure to maintain coherent and task-relevant internal states over extended reasoning horizons. Existing approaches primarily manage context through raw accumulation or passive summarization, treating it as a static artifact and allowing early errors or misplaced emphasis to persist. Motivated by this perspective, we propose ARC, which is the first framework to systematically formulate context management as an active, reflection-driven process that treats context as a dynamic internal reasoning state during execution. ARC operationalizes this view through reflection-driven monitoring and revision, allowing agents to actively reorganize their working context when misalignment or degradation is detected. Experiments on challenging long-horizon information-seeking benchmarks show that ARC consistently outperforms passive context compression methods, achieving up to an 11% absolute improvement in accuracy on BrowseComp-ZH with Qwen2.5-32B-Instruct.

Tool learning, which enables large language models (LLMs) to utilize external tools effectively, has garnered increasing attention for its potential to revolutionize productivity across industries. Despite rapid development in tool learning, key challenges and opportunities remain understudied, limiting deeper insights and future advancements. In this paper, we investigate the tool learning ability of 41 prevalent LLMs by reproducing 33 benchmarks and enabling one-click evaluation for seven of them, forming a Tool Learning Platform named ToLeaP. We also collect 21 out of 33 potential training datasets to facilitate future exploration. After analyzing over 3,000 bad cases of 41 LLMs based on ToLeaP, we identify four main critical challenges: (1) benchmark limitations induce both the neglect and lack of (2) autonomous learning, (3) generalization, and (4) long-horizon task-solving capabilities of LLMs. To aid future advancements, we take a step further toward exploring potential directions, namely (1) real-world benchmark construction, (2) compatibility-aware autonomous learning, (3) rationale learning by thinking, and (4) identifying and recalling key clues. The preliminary experiments demonstrate their effectiveness, highlighting the need for further research and exploration.

Effective tool use is essential for large language models (LLMs) to interact meaningfully with their environment. However, progress is limited by the lack of efficient reinforcement learning (RL) frameworks specifically designed for tool use, due to challenges in constructing stable training environments and designing verifiable reward mechanisms. To address this, we propose an automated environment construction pipeline, incorporating scenario decomposition, document generation, function integration, complexity scaling, and localized deployment. This enables the creation of high-quality training environments that provide detailed and measurable feedback without relying on external tools. Additionally, we introduce a verifiable reward mechanism that evaluates both the precision of tool use and the completeness of task execution. When combined with trajectory data collected from the constructed environments, this mechanism integrates seamlessly with standard RL algorithms to facilitate feedback-driven model training. Experiments on LLMs of varying scales demonstrate that our approach significantly enhances the models' tool-use performance without degrading their general capabilities, regardless of inference modes or training algorithms. Our analysis suggests that these gains result from improved context understanding and reasoning, driven by updates to the lower-layer MLP parameters in models.

Vision tool-use reinforcement learning (RL) can equip vision-language models with visual operators such as crop-and-zoom and achieves strong performance gains, yet it remains unclear whether these gains are driven by improvements in tool use or evolving intrinsic capabilities.We introduce MED (Measure-Explain-Diagnose), a coarse-to-fine framework that disentangles intrinsic capability changes from tool-induced effects, decomposes the tool-induced performance difference into gain and harm terms, and probes the mechanisms driving their evolution. Across checkpoint-level analyses on two VLMs with different tool priors and six benchmarks, we find that improvements are dominated by intrinsic learning, while tool-use RL mainly reduces tool-induced harm (e.g., fewer call-induced errors and weaker tool schema interference) and yields limited progress in tool-based correction of intrinsic failures. Overall, current vision tool-use RL learns to coexist safely with tools rather than master them.

Large language model (LLM) agents increasingly operate over long and recurring external contexts, like document corpora and code repositories. Across invocations, existing approaches preserve either the agent's trajectory, passive access to raw material, or task-level strategies. None of them preserves what we argue is most needed for repeated same-context workloads: reusable orientation knowledge (e.g., what the context contains, how it is organized, and which entities, constants, and schemas have historically been useful) about the recurring context itself. We introduce PEEK, a system that caches and maintains this orientation knowledge as a context map: a small, constant-sized artifact in the agent's prompt that gives it a persistent peek into the external context. The map is maintained by a programmable cache policy with three modules: a Distiller that extracts transferable knowledge from inference-time signals, a Cartographer that translates it into structured edits, and a priority-based Evictor that enforces a fixed token budget. On long-context reasoning and information aggregation, PEEK improves over strong baselines by 6.3-34.0% while using 93-145 fewer iterations and incurring 1.7-5.8x lower cost than the state-of-the-art prompt-learning framework, ACE. On context learning, PEEK improves solving rate and rubric accuracy by 6.0-14.0% and 7.8-12.1%, respectively, at 1.4x lower cost than ACE. These gains generalize across LMs and agent architectures, including OpenAI Codex, a production-grade coding agent. Together, these results show that a context map helps long-context LLM agents interact with recurring external contexts more accurately and efficiently.

The Model Context Protocol (MCP) has become a common interface for connecting large language model (LLM) agents to external tools, but its reliance on stateless, eager schema injection imposes a hidden per-turn overhead the MCP Tax or Tools Tax that practitioner reports place between roughly 10k and 60k tokens in typical multi-server deployments. This payload inflates the key-value cache, is associated with reasoning degradation as context utilization approaches published fracture points around 70%, and turns token budgets into a recurring operational cost. We introduce Tool Attention, a middleware-layer mechanism that generalizes the "Attention Is All You Need" paradigm from self-attention over tokens to gated attention over tools. Tool Attention combines (i) an Intent Schema Overlap (ISO) score from sentence embeddings, (ii) a state-aware gating function enforcing preconditions and access scopes, and (iii) a two-phase lazy schema loader that keeps a compact summary pool in context and promotes full JSON schemas only for top-k gated tools. We evaluate on a simulated 120-tool, six-server benchmark whose per-server token counts are calibrated to public audits of real MCP deployments. In this simulation, Tool Attention directly reduces measured per-turn tool tokens by 95.0% (47.3k -> 2.4k) and raises effective context utilization (a token-ratio quantity) from 24% to 91%. End-to-end figures for task success, latency, cost, and reasoning quality are reported as projections derived from the measured token counts combined with published deployment telemetry; they are not measured on live LLM agents, and we mark projected values explicitly throughout. Taken together, the results support a simple thesis: protocol-level efficiency, not raw context length, is a binding constraint on scalable gentic systems. The code for this work is accessible at https://github.com/asadani/tool-attention

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

LLMs' capabilities are enhanced by using function calls to integrate various data sources or API results into the context window. Typical tools include search, web crawlers, maps, financial data, file systems, and browser usage, etc. Integrating these data sources or functions requires a standardized method. The Model Context Protocol (MCP) provides a standardized way to supply context to LLMs. However, the evaluation of LLMs and AI Agents' MCP tool use abilities suffer from several issues. First, there's a lack of comprehensive datasets or benchmarks to evaluate various MCP tools. Second, the diverse formats of response from MCP tool call execution further increase the difficulty of evaluation. Additionally, unlike existing tool-use benchmarks with high success rates in functions like programming and math functions, the success rate of real-world MCP tool is not guaranteed and varies across different MCP servers. Furthermore, the LLMs' context window also limits the number of available tools that can be called in a single run, because the textual descriptions of tool and the parameters have long token length for an LLM to process all at once. To help address the challenges of evaluating LLMs' performance on calling MCP tools, we propose MCPToolBench++, a large-scale, multi-domain AI Agent tool use benchmark. As of July 2025, this benchmark is build upon marketplace of over 4k MCP servers from more than 40 categories, collected from the MCP marketplaces and GitHub communities. The datasets consist of both single-step and multi-step tool calls across different categories. We evaluated SOTA LLMs with agentic abilities on this benchmark and reported the results.

Language models (LMs) are powerful yet mostly for text generation tasks. Tools have substantially enhanced their performance for tasks that require complex skills. However, many works adopt the term "tool" in different ways, raising the question: What is a tool anyway? Subsequently, where and how do tools help LMs? In this survey, we provide a unified definition of tools as external programs used by LMs, and perform a systematic review of LM tooling scenarios and approaches. Grounded on this review, we empirically study the efficiency of various tooling methods by measuring their required compute and performance gains on various benchmarks, and highlight some challenges and potential future research in the field.

Tools serve as pivotal interfaces that enable humans to understand and reshape the world. With the advent of foundational models, AI systems can utilize tools to expand their capabilities and interact with the world. Existing tool learning methodologies, encompassing supervised fine-tuning and prompt engineering approaches, often induce language models to utilize tools indiscriminately, as complex problems often exceed their own competencies. However, introducing tools for simple tasks, which the models themselves can readily resolve, can inadvertently propagate errors rather than enhance performance. This leads to the research question: can we teach language models when and how to use tools? To meet this need, we propose Tool leaRning wIth exeCution fEedback (TRICE), a two-stage end-to-end framework that enables the model to continually learn through feedback derived from tool execution, thereby learning when and how to use tools effectively. Experimental results, backed by further analysis, show that TRICE can make the language model to selectively use tools by decreasing the model's dependency on tools while enhancing the performance. Code and datasets will be available in https://github.com/zjunlp/trice.

Machine unlearning in LLMs is the targeted removal of specific knowledge while preserving all other capabilities, critical for privacy and safety. Yet existing benchmarks measure it unreliably. They miss knowledge that resurfaces under paraphrased or indirect queries, a failure we call under-forgetting, and lack the semantic, syntactic, and lexical probes needed to verify that unrelated knowledge is preserved, a failure we call over-forgetting. Both failures reflect an asymmetric generalization problem. Forget evaluation must cover diverse query formulations of the same target facts, testing whether forgetting holds beyond exact training prompts. Retain evaluation must probe a far larger and implicitly defined set, namely every fact disjoint from the forget target. The retain set thus defines the effective forget set, yet current datasets provide no fine-grained annotation of this forget-retain boundary. We address this with SUITE, an evaluation protocol and training corpus that captures forget-retain structure for real-world factual domains. Methods trained on SUITE improve substantially, showing that training data is as important as algorithmic design. Building on the obtained insights, we introduce JensUn++, an unlearning algorithm that achieves the best forget-retain utility trade-off across three LLMs, in both sequential and joint unlearning settings. Code and datasets are available at https://amitpeleg.github.io/forget-narrowly-retain-broadly

As large language models engage in extended reasoning tasks, they accumulate significant state -- architectural mappings, trade-off decisions, codebase conventions -- within the context window. This understanding is lost when sessions reach context limits and undergo lossy compaction. We propose Contextual Memory Virtualisation (CMV), a system that treats accumulated LLM understanding as version-controlled state. Borrowing from operating system virtual memory, CMV models session history as a Directed Acyclic Graph (DAG) with formally defined snapshot, branch, and trim primitives that enable context reuse across independent parallel sessions. We introduce a three-pass structurally lossless trimming algorithm that preserves every user message and assistant response verbatim while reducing token counts by a mean of 20% and up to 86% for sessions with significant overhead by stripping mechanical bloat such as raw tool outputs, base64 images, and metadata. A single-user case-study evaluation across 76 real-world coding sessions demonstrates that trimming remains economically viable under prompt caching, with the strongest gains in mixed tool-use sessions, which average 39% reduction and reach break-even within 10 turns. A reference implementation is available at https://github.com/CosmoNaught/claude-code-cmv.

Large Language Models (LLMs), pre-trained on massive text corpora, exhibit remarkable human-level language understanding, reasoning, and decision-making abilities. However, they tend to memorize unwanted information, such as private or copyrighted content, raising significant privacy and legal concerns. Unlearning has emerged as a promising solution, but existing methods face a significant challenge of over-forgetting. This issue arises because they indiscriminately suppress the generation of all the tokens in forget samples, leading to a substantial loss of model utility. To overcome this challenge, we introduce the Targeted Information Forgetting (TIF) framework, which consists of (1) a flexible targeted information identifier designed to differentiate between unwanted words (UW) and general words (GW) in the forget samples, and (2) a novel Targeted Preference Optimization approach that leverages Logit Preference Loss to unlearn unwanted information associated with UW and Preservation Loss to retain general information in GW, effectively improving the unlearning process while mitigating utility degradation. Extensive experiments on the TOFU and MUSE benchmarks demonstrate that the proposed TIF framework enhances unlearning effectiveness while preserving model utility and achieving state-of-the-art results.

The tool-using capability of large language models (LLMs) enables them to access up-to-date external information and handle complex tasks. Current approaches to enhancing this capability primarily rely on distilling advanced models by data synthesis. However, this method incurs significant costs associated with advanced model usage and often results in data compatibility issues, led by the high discrepancy in the knowledge scope between the advanced model and the target model. To address these challenges, we propose ToolACE-DEV, a self-improving framework for tool learning. First, we decompose the tool-learning objective into sub-tasks that enhance basic tool-making and tool-using abilities. Then, we introduce a self-evolving paradigm that allows lightweight models to self-improve, reducing reliance on advanced LLMs. Extensive experiments validate the effectiveness of our approach across models of varying scales and architectures.

Tool-integrated reasoning (TIR) enables large language models (LLMs) to enhance their capabilities by interacting with external tools, such as code interpreters (CI). Most recent studies focus on exploring various methods to equip LLMs with the ability to use tools. However, how to further boost the reasoning ability of already tool-capable LLMs at inference time remains underexplored. Improving reasoning at inference time requires no additional training and can help LLMs better leverage tools to solve problems. We observe that, during tool-capable LLM inference, both the number and the proportion of erroneous tool calls are negatively correlated with answer correctness. Moreover, erroneous tool calls are typically resolved successfully within a few subsequent turns. If not, LLMs often struggle to resolve such errors even with many additional turns. Building on the above observations, we propose PruneTIR, a rather effective yet efficient framework that enhances the tool-integrated reasoning at inference time. During LLM inference, PruneTIR prunes trajectories, resamples tool calls, and suspends tool usage through three components: Success-Triggered Pruning, Stuck-Triggered Pruning and Resampling, and Retry-Triggered Tool Suspension. These three components enable PruneTIR to mitigate the negative impact of erroneous tool calls and prevent LLMs from getting stuck in repeated failed resolution attempts, thereby improving overall LLM performance. Extensive experimental results demonstrate the effectiveness of PruneTIR, which significantly improves Pass@1 and efficiency while reducing the working context length for tool-capable LLMs.

Although recent tool-augmented benchmarks involve complex requests, evaluation remains limited to answer matching, neglecting critical trajectory aspects like efficiency, hallucination, and adaptivity. The most straightforward method for evaluation is to compare an agent's trajectory with the ground-truth, but annotating all valid ground-truth trajectories is prohibitively expensive. In this manner, we introduce TRACE, a reference-free framework for the multi-dimensional evaluation of tool-augmented LLMs. By incorporating an evidence bank which accumulates knowledge from preceding steps, TRACE assesses an agent's reasoning trajectory effectively. To validate our framework, we develop a new meta-evaluation dataset with diverse and flawed trajectories, each labeled with multi-faceted performance scores. Our results confirm that TRACE accurately evaluates complex trajectories even with small open-source LLMs. Furthermore, we apply our method to evaluate the trajectories that agents produce while solving tool-augmented tasks, presenting previously unreported observations and their corresponding insights.

Existing works increasingly adopt memory-centric mechanisms to process long contexts in a segment manner, and effective memory management is one of the key capabilities that enables large language models to effectively propagate information across the entire sequence. Therefore, leveraging reward models (RMs) to automatically and reliably evaluate memory quality is critical. In this work, we introduce MemoryRewardBench, the first benchmark to systematically study the ability of RMs to evaluate long-term memory management processes. MemoryRewardBench covers both long-context comprehension and long-form generation tasks, featuring 10 distinct settings with different memory management patterns, with context length ranging from 8K to 128K tokens. Evaluations on 13 cutting-edge RMs indicate a diminishing performance gap between open-source and proprietary models, with newer-generation models consistently outperforming their predecessors regardless of parameter count. We further expose the capabilities and fundamental limitations of current RMs in evaluating LLM memory management across diverse settings.

Integrating external tools with Large Language Models (LLMs) has emerged as a promising paradigm for accomplishing complex tasks. Since LLMs still struggle to effectively manage large tool collections, researchers have begun exploring retrieval-based methods to pre-select the most relevant options, addressing input length and latency constraints. However, existing retrievers are often misaligned with tool-calling LLMs due to their separate training processes. This paper presents PORTS, a novel odds ratio preference optimization method for training retrievers aimed at tool selection. Using a perplexity-inspired preference signal from a frozen LLM, our approach fine-tunes a retriever to find helpful tools by optimizing the correlation between the selection probabilities and the downstream performances while jointly enforcing a contrastive semantic loss between documentation strings. The versatility of PORTS and its ability to significantly improve tool selection accuracy are demonstrated through extensive experiments on six datasets, two encoder models, and three LLMs with diverse prior knowledge. With low computational demands, our alignment process facilitates generalization to new queries and tools, proving valuable for practical applications with evolving toolsets.

Tabular stream learning requires predictions on sequentially arriving examples under distribution shift. While standard methods adapt by updating model states, tabular foundation models (TFMs) make predictions conditioned on a labeled context in an in-context manner, making them a natural alternative for stream learning. This shifts the challenge from how to update the model to how to manage the context. We propose a future information view that yields three practical requirements for context management: preserve recent examples, retain uncertain examples, and remove redundant examples. We instantiate these requirements as CURE (Context management via Uncertainty-aware admission and Redundancy aware Eviction), a context-managing policy with entropy-gated admission and redundancy-aware eviction. Across seven streams, CURE shows up to 27.0% relative improvement over classical stream learners, remains robust across multiple TFM backbones, and ranks first among other policy variants. Code and datasets are available at https://github.com/morcellinus/CURE-ICML-FMSD.

Large language models (LLMs) increasingly store user preferences in persistent memory to support personalization across interactions. However, in third-party communication settings governed by social and institutional norms, some user preferences may be inappropriate to apply. We introduce BenchPreS, which evaluates whether memory-based user preferences are appropriately applied or suppressed across communication contexts. Using two complementary metrics, Misapplication Rate (MR) and Appropriate Application Rate (AAR), we find even frontier LLMs struggle to apply preferences in a context-sensitive manner. Models with stronger preference adherence exhibit higher rates of over-application, and neither reasoning capability nor prompt-based defenses fully resolve this issue. These results suggest current LLMs treat personalized preferences as globally enforceable rules rather than as context-dependent normative signals.